Inconel 718 Pipe Fittings
Inconel 2.4668 Buttweld Cross Wholesaler, Inconel 718 45 degree Elbow, Inconel 10d Pipe Bend, Inconel 718 Pipe Fittings, ASME SB366 Inconel 718 Long Stub, Inconel UNS N07718 Butt weld Reducer, Alloy 718 Two Joint Pipe Fittings, Inconel UNS N07718 Seamless Pipe Fittings, Manufacturer in Mumbai,India.
Inconel 718 Pipe Fittings
Inconel UNS N07718 Butweld Pipe Fittings
Victor Steel is anacknowledged distributor and manufacturer of Inconel Alloy 718 Pipe Fittings, which is used mainly in lowering or impartial environments. Inconel UNS N07718 Tee Pipe Fittings gives corrosion resistance in lowering and impartial media in addition to in oxidizing atmospheres supplied that the oxidizing media lets in the formation of a passive oxide film. They are all changes of the eighteen percentage chromium and eight percentage nickel austenitic alloy. This product presents exquisite corrosion resistance. This product is likewise available to be used at excessive temperatures. This product may be formed into quite a few shapes. This product may be used without annealing. This product is typically skilled within the heat affected region of welds in 'thick' sections of steel. This product resists maximum oxidizing acids.
Inconel WNR 2.4668 Cross Pipe Fittings is non-magnetic within the annealed condition. Low carbon content material on this product method much less carbide precipitation within the heat-affected region. This product is usually used to technique system within the mining, chemical and cryogenic applications. This product isn't designed for applications in which sensitization corrosion will be expected. This product is broadly used due to the convenience wherein it is formed into numerous shapes. This product has terrific corrosion / oxidation resistance way to the chromium content material. This product have the equal simple iron and carbon composition, however additionally comprise a beneficial dose of chromium. It is regularly used at cryogenic temperatures. This steel is used alongside hot acetic and citric acid within the food processing industry. Nickel Alloy 718 Bend Pipe Fittings is usually recommended that this steel have to now no longer be constantly used at 797 Degree F – 1580 Degree F variety because of carbide precipitation. Fusion factor is decrease than that of non-alloyed steels, and so austenitic this steel should be welded with decrease heat enter than non-alloyed steels. This steel are austenitic, ensuing in incredibly excessive creep strength values. This steel is applied for ease of fabrication because of its higher formability and weldability, and so has oxidation resistance to 2000 Degree F.
Inconel 718 Pipe Elbow, Inconel Alloy 718 Buttweld Pipe Bend, ANSI B16.9 Inconel 718 Welded Buttweld Fittings, 718 Inconel Long Stub End, Inconel WERKSTOFF NR.2.4668 Cross, ASME SB366 718 Collar Pipe Fittings, ANSI B16.9 718 Inconel Alloy Buttweld Pipe Cap, Inconel 3d Pipe Bend, ASTM B366 Alloy 718 90 degree Elbow Suppliers in Mumbai,India.
Inconel 718 Pipe Fittings Specification
| 718 Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
|---|---|
| 718 Inconel Alloy Pipe Fittings size | 718 Seamless Butt Weld Fittings : 1/2" - 10" 718 Welded Butt Weld Fittings : 1/2" - 48" |
| Alloy 718 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Inconel 718 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 718 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM B366 718 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 718 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 718 Buttweld Fitting |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| ASTM B366 718 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 718 Inconel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 366 718 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | Alloy UNS N07718, N07718 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Inconel 718 Cross
Inconel 718 Pipe Bend
Inconel 718 Pipe Collar
Inconel 718 Lateral Tee
Inconel 718 90 Deg Elbow
Inconel 718 Stub End
Inconel 718 Tee
Inconel 718 45 deg Elbow
Inconel 718 Concentric Reducer
Inconel 718 Eccentric Reducer
Inconel 718 Pipe Cap
Inconel 718 Pipe Nipples
Inconel 718 Pipe Fittings Equivalent Grade Specification
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 718 | N07718 | – | – | 2.4668 | – | – | – |
Inconel 718 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Al | Ni | |
| Inconel 718 | min. | – | – | – | bal | – | 17.0 | 0.2 | 50.0 |
| max. | 0.08 | 0.35 | 0.35 | bal | 0.01 | 21.0 | 0.8 | 55.0 | |
Inconel 718 Pipe Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 718 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
ASTM B366 Inconel 718 Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASTM B366 Inconel 718 Pipe Fittings Forms & Availability
| Products | Size | |
|---|---|---|
| ASTM B366 Inconel Alloy 718 Elbow – Long Radius | ASTM B366 Inconel Alloy 718 Stub Ends | Sizes 1/2″ – 48″ |
| ASTM B366 Inconel Alloy 718 Elbow – Short Radius | ASTM B366 Inconel Alloy 718 Cross | |
| ASTM B366 Inconel Alloy 718 3D Elbow | ASTM B366 Inconel Alloy 718 5D Elbow | |
| ASTM B366 Inconel Alloy 718 Reducing Elbow | ASTM B366 Inconel Alloy 718 Reducing Cross | |
| ASTM B366 Inconel Alloy 718 45° Elbow | ASTM B366 Inconel Alloy 718 Tees | |
| ASTM B366 Inconel Alloy 718 Fabricated Tee | ASTM B366 Inconel Alloy 718 End Cap | |
| ASTM B366 Inconel Alloy 718 Reducer | ASTM B366 Inconel Alloy 718 Coupling | |
| ASTM B366 Inconel Alloy 718 Concentric Reducer | ASTM B366 Inconel Alloy 718 Eccentric Reducer | |
| ASTM B366 Inconel Alloy 718 Pipe Nipple | ASTM B366 Inconel Alloy 718 Welded Pipe Fittings | |
Inconel 718 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Inconel 718 Pipe Fittings
| ASME B16.9 ASTM B366 Inconel Alloy 718 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Inconel 718 Pipe Fittings
- Inconel 718 90° LR Elbow
- 718 Inconel Seamless Pipe Fittings
- Inconel 718 90° Weldable SR Elbow
- Alloy UNS N07718 Pipe Reducers
- ASME B16.9 Inconel 718 90° Reducing Elbow
- 718 Nickel Alloy Welded Pipe Fittings
- MSS SP-43 Inconel 718 Stub End
- ASTM B366 718 Inconel Caps
- Inconel 718 Pipe Fittings Supplier
- B366 718 Two Joint Pipe Fittings
- ASTM B366 Inconel 718 Reducing Tee
- ASTM B366 718 Lateral Tee Supplier
- Sch 10 Inconel 718 Concentric Reducer
- Inconel® Alloy 718 Welded Pipe Fittings Dealer
- Sch 80 Nickel Alloy 718 Eccentric Reducer
- B366 Grade 718 Industrial Buttweld Pipe Fittings
- ANSI B16.9 Inconel 718 Pipe Cap
- UNS N07718 Inconel Weldable 3D Elbow
- 718 Inconel 180° Buttweld Elbow
- Alloy 718 Lap Joint Stub Ends Stockists
- ASTM B366 Gr 718 45° Long Radius Elbow
- Inconel 2.4668 Inconel Alloy Short Radius Elbow Exporter
- B366 Grade 718 Pipe Bends
- ASTM B366 718 Inconel Pipe Elbow
- 718 Inconel 180° LR Return Bend
- 718 Inconel Alloy 90° Seamless Elbow Dealer
- Inconel 718 Weldable 1.5D Elbow
- 718 Inconel® Alloy Seamless Reducing Tee
- 718 Nickel Alloy Seamless Fittings
- Inconel 718 1D Elbow/3D Elbow/5D Elbow
- ASTM B366 718 Welded Pipe Fittings
- 718 Inconel Alloy Two Halve Butt weld Fittings
- Inconel 2.4668 Stub End Exporter
- 1 Inch Inconel 718 Buttweld Pipe Fittings
- 6 Inch Inconel Alloy 718 Buttweld Pipe Fittings
- 718 Inconel Buttweld Reducing Nipple
- Inconel Alloy 718 Seamless Buttweld Fittings
- Sch 80 Inconel 718 Pipe Fittings
- ASTM B366 Inconel 718 Eccentric Reducer
- ASME B16.9 Inconel 718 10D Elbow
- 718 Inconel® Alloy Two Joint Pipe Fittings
- 718 Inconel LR Elbow Supplier
- Alloy 718 Wrought Austenitic 45 Degree Elbow
- Inconel 718 Pipe Fittings Stockist
- Inconel 718 Pipe Fittings Supplier in Mumbai
- Alloy 718 Butt weld Pipe Fittings Manufacturer in India
- Inconel 2.4668 Pipe Fittings Dimensions
- Inconel 718 Buttweld Reducing Nipple
- Wrought Austenitic Inconel 718 Pipe Fittings
- ASTM B366 718 Eccentric Reducer at Best Price
- Alloy 718 Equal Cross Supplier
- Suppliers of 718 Nickel Alloy End Pipe Cap
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.