Stainless Steel 316L Pipe Fittings
SS DIN 1.4404 Buttweld Cross, Stainless Steel 316L Equal & Unequal Tee, 316L SS Buttweld Pipe End Cap Stockist, Stainless Steel 316L Butt weld Reducer Manufacturer in Mumbai,India, Qatar, France, Russia.
Stainless Steel 316L Pipe Fittings
SS 316L UNS S31603 Pipe Fittings
Victor Steel is anacknowledged supplier and manufacturer of SS 316L Pipe Fittings, which has been utilized in a selection of applications. Stainless Steel UNS S31603 Reducer Pipe Fittings has wonderful corrosion resistance, mainly in impartial and alkaline salts. This product is widely known for its multiplied efficiency and corrosion resistant properties. It is absolutely nonmagnetic, even at pretty low temperatures. This steel is an alloy, precipitation hardenable thru additions of aluminium and titanium. The increased properties of this steel are received with the aid of using including aluminium and titanium to the nickel-copper base. By including Aluminium and Titanium to this steel, observed with the aid of using an age hardening system, this complements the physical properties, giving the material more strength and hardness.
Resistance to hydrogen sulphide makes this steel beneficial in sour-fueloline environments making it extraordinarily famous within the oil patch. Aluminium and titanium additions, plus managed heat deal with cycles, are accountable for the added strength of this Stainless Steel WNR 1.4404 Concentric Reducer Pipe Fittings. In age-hardened situation, this steel additionally has more tendency towards pressure- corrosion cracking in a few environments. A beneficial feature of this steel is that it's miles absolutely nonmagnetic, even at pretty low temperatures. These steel are received with the aid of using including aluminium and titanium to the nickel-copper base. This steel is precipitation hardenable, because of the additions of Aluminium and Titanium. 316L Stainless Steel Eccentric Reducer Pipe Fittings desires to be grew to become and worked at sluggish speeds and occasional feed rates. This steel additionally has low permeability and is nonmagnetic to under -a hundred and fifty degree F (-one hundred and one Degree C).This product is a solid-answer binary alloy and is proof against each steam and seawater. This product has properly mechanical properties from sub-zero temperatures as much as 549 Degree C. This product is especially proof against hydrochloric and hydrofluoric acids while they're de-aerated. This product is a low corrosion rate in unexpectedly flowing brackish or seawater blended by means of having an incredible resistance to pressure-corrosion cracking in maximum freshwaters.
SS 316L End Caps, ASME SA403 SS 316L Tees, MSS SP-79 SS Grade 316L Butt weld Pipe Fitting, SS UNS S31603 Buttweld Pipe Fittings Suppliers in Mumbai, India, Qatar, France, Russia.
ANSI B16.9 Stainless Steel 316L Pipe Fittings Specification
| 316L Pipe Fittings Specifications | ASTM A403/ ASME SA403 |
|---|---|
| 316L SS Pipe Fittings size | 316L Seamless Butt Weld Fittings : 1/2" - 10" 316L Welded Butt Weld Fittings : 1/2" - 48" |
| SS 316L Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Stainless Steel 316L Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 316L Buttweld Pipe Fittings Type | DN15-DN1200 |
| ASTM A403 316L Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP316L Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 316L Buttweld Fitting |
| Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
| ASTM A403 WP316L Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 316L Stainless Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 403 WP316L Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | SS UNS S31603 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Stel 316L Cross
Stainless Stel 316L Stub End
Stainless Stel 316L Tee
Stainless Stel 316L 45 deg Elbow
Stainless Stel 316L Concentric Reducer
Stainless Stel 316L Eccentric Reducer
Stainless Stel 316L Pipe Cap
Stainless Stel 316L Pipe Nipples
Stainless Stel 316L Pipe Bend
Stainless Stel 316L Pipe Collar
Stainless Stel 316L Lateral Tee
Stainless Stel 316L 90 Deg Elbow
Stainless Steel 316L Pipe Fittings Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Stainless Steel 316L Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 316L | min. | – | – | – | – | – | 16.0 | 2.0-3.0 | 10.0 | – |
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | – | ||
Stainless Steel 316L Pipe Fittings Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316L | 485 | 170 | 40 | 95 | 217 |
Sus 316L SS Butt weld Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Stainless Steel 316L Pipe Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Stainless Steel 316L Pipe Fittings
| ASME B16.9 ASTM A403 WP316L Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Stainless Steel 316L Pipe Fittings
- Stainless Steel 316L 90° LR Elbow
- SS 316L Seamless Pipe Fittings
- 316L Stainless Steel 90° Weldable SR Elbow
- SS UNS S31603 Pipe Reducers
- ASTM A403 SS 316L 90° Reducing Elbow
- MSS SP-43 Stainless Steel 316L Stub End
- Stainless Steel 316L Weldable 1.5D Elbow
- 316L SS Two Halve Butt weld Fittings
- SS DIN 1.4404 Stub End Exporter
- X2CrNiMo17-12-2 SS Two Joint Pipe Fittings
- SUS 316L Seamless Buttweld Fittings
- ASME SA403 Stainless Steel 316L Eccentric Reducer
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.