Stainless Steel 310H Pipe Fittings
SS UNS S31009 Equal & Unequal Tee, Stainless Steel 310H Long Stub bends, SS 310H Buttweld Pipe Fittings, ASTM A403 SS 310H Concentric Reducers Suppliers in Mumbai, India, Saudi Arabia, Qatar, Kingdom Of Bahrain.
Victor Steel is anacknowledged supplier and exporter of SS 310H Pipe Fittings, whichis regularly used for the excessive tolerance tubing. Stainless Steel UNS S31009 Elbow Pipe Fittings reveals traits like properly weldability, properly corrosion resistance, and excessive strength. This product has incredible resistance to numerous corrosive environments. This product consists of the equal amount of nickel and copper as is discovered in a certainly going on nickel ore. This product has properly weldability and slight to excessive strength. This product is a steeply-priced alloy, and therefore its use is constrained to those applications wherein it can't get replaced with less expensive alternatives. This product is best hardenable thru cold working, as a substitute than heat remedy.
The traditional machining strategies used on iron alloys can be used for this product. With excessive nickel content, this Stainless Steel WNR 1.4841 45-Degree Elbow Pipe Fittings is proof against chloride-caused pressure corrosion cracking. This product is pretty smooth at excessive temperatures and therefore forging is a tremendously easy system. This product is used for offshore and marine applications and for chemical processing. This steel is a precipitation hardenable alloy that is generally utilized in applications with enormously corrosive conditions. It is regularly utilized in Electronic components, Valve trim, Springs, and more. This steel brings traits much like Alloy four hundred in appreciate to corrosion resistance. This steel is regularly applied in excessive-pace seawater and in stagnant or sluggish-shifting seawater. Stainless Steel 310H 90-Degree Elbow Pipe Fittings gives incredible corrosion resistance in a number of environments. Small additions of aluminium and titanium shape this steel with the equal corrosion resistance however with plenty more strength because of gamma top formation on aging. This steel has incredible mechanical properties from sub-zero temperatures as much as approximately 480 Degree C. This steel has incredible corrosion resistance in an intensive variety of herbal and chemical environments. When within the age-hardened situation, this steel has a more tendency towards pressure-corrosion cracking in a few environments. The addition of aluminium and titanium on this steel to an already sturdy nickel-copper base adds strength and hardness.
SS 310H Pipe Fittings, 310H Stainless Steel Reducers, SUS 310H Stainless Steel Pipe Cap Suppliers, SS UNS S31009 Welded Pipe Fittings Exporters in Mumbai, India, Qatar, France, Russia.
ANSI B16.9 Stainless Steel 310H Pipe Fittings Specification
310H Pipe Fittings Specifications | ASTM A403/ ASME SA403 |
---|---|
310H SS Pipe Fittings size | 310H Seamless Butt Weld Fittings : 1/2" - 10" 310H Welded Butt Weld Fittings : 1/2" - 48" |
SS 310H Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Stainless Steel 310H Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
310H Buttweld Pipe Fittings Type | DN15-DN1200 |
ASTM A403 310H Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP310H Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 310H Buttweld Fitting |
Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
ASTM A403 WP310H Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
310H Stainless Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 403 WP310H Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | SS UNS S31009 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Stainless Stel 310H Cross
Stainless Stel 310H Stub End
Stainless Stel 310H Tee
Stainless Stel 310H 45 deg Elbow
Stainless Stel 310H Concentric Reducer
Stainless Stel 310H Eccentric Reducer
Stainless Stel 310H Pipe Cap
Stainless Stel 310H Pipe Nipples
Stainless Stel 310H Pipe Bend
Stainless Stel 310H Pipe Collar
Stainless Stel 310H Lateral Tee
Stainless Stel 310H 90 Deg Elbow
Stainless Steel 310H Pipe Fittings Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310H | – | S31009 | – | – | – | – | – |
Stainless Steel 310H Pipe Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310H | 0.04 – 0.10 | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | – | 19.00 – 21.00 | 53.885 min |
Stainless Steel 310H Pipe Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40% |
Stainless Steel 310H Butt weld Pipe Fittings Dimensions Standard
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Stainless Steel 310H Pipe Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SA-403 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Stainless Steel 310H Pipe Fittings
ASME B16.9 ASTM A403 WP310H Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Stainless Steel 310H Pipe Fittings
- Stainless Steel 310H 90° LR Elbow
- Grade WP310H Seamless Pipe Fittings
- Stainless Steel 310H 90° Weldable SR Elbow
- SS UNS S31009 Pipe Reducers
- ASTM A403 SS 310H 90° Reducing Elbow
- MSS SP-43 Stainless Steel 310H Stub End
- 310H SS Two Halve Butt weld Fittings
- SS DIN 1.4841 Stub End Exporter
- Stainless Steel 310H Reducing Nipple
- SUS 310H Seamless Fittings
- ASME SA403 Stainless Steel 310H Eccentric Reducer
- Stainless Steel WP310H Pipe Fittings