ASTM A234 Carbon Steel Pipe Fittings
ASTM A234 WPB Carbon Steel Buttweld Fittings, ASTM A234 WPB Pipe Fittings, Carbon Steel WPB Elbow, A234 CS WPB Butt weld Pipe Fittings Manufacturer in Mumbai,India.
ASTM A234 Carbon Steel Pipe Fittings
ASTM A234 WPB CS Pipe Fittings
Victor Steel is anacknowledged seller and trader of ASTM A234 Carbon Steel Pipe Fittings, which is an excessive temperature chromium nickel austenitic steel. An information of the attributes of this steel gives a first-rate base for evaluating individuals of the austenitic own circle of relatives of steels. This steel consists of each chromium (among 18 percentage – 20 percentage) and nickel (among 8 percentage – 10.5 percentage) metals as the primary non-iron constituents. ASME SA234 Carbon Steel Elbow Pipe Fittings has no less than chromium and nickel, mixed in company of having a most of carbon. When choosing a steel that need to bear corrosive environments, austenitic this steel are normally used. The molybdenum in this steel is delivered to assist face up to corrosion to chlorides (like sea water and de-icing salts).
The chemical composition, weldability, mechanical properties, and corrosion / oxidation resistance of this steel offer the first-rate all-spherical overall performance stainless steel at notably low cost. Carbon Steel ASTM A234 45-Degree Elbow Pipe Fittings is available in a much broader variety of products, finishes and forms than any different. This steel is an austenitic grade that may be critically deep drawn. This steel refers to its durability, quality, and temperature resistance. It is used for production components which must be proof against scaling as much as approximately 1050 Degree C. This product is austenitic heat resisting steel by means of having a superb oxidation resistance. It presentations first-rate resistance to oxidation beneath mildly cyclic situations. This product are normally used for accelerated temperature applications. An austenitic chromium-nickel grade, this product presentations first-rate oxidation resistance as much as 1094 Degree C. Carbon Steel ASME SA234 90-Degree Elbow Pipe Fittings has first-rate resistance to oxidation beneath mildly cyclic situations via 2000 Degree F. This product is advanced to be used in excessive temperature corrosion resistant applications. It is used for excessive temperature applications which includes furnace components and heat remedy equipment. It stains much less without problems than different iron-primarily based totally metals. This product combines first-rate excessive temperature properties in company of having a proper ductility and weldability.
ASME SA420M Carbon Steel WPL6 Stub End, Carbon Steel ASTM A234 WPB Fittings, CS A234 Gr. WPB Buttweld Pipe Fittings, Carbon Steel WPB Butt weld Pipe Fittings Suppliers in Mumbai,India.
ASTM A234 Carbon Steel Pipe Fittings Specification
| WPB Pipe Fittings Specifications | ASTM A234/ ASME SA234 |
|---|---|
| WPB Carbon Steel Pipe Fittings size | WPB Seamless Butt Weld Fittings : 1/2" - 10" WPB Welded Butt Weld Fittings : 1/2" - 48" |
| CS WPB Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1800, BS10 |
| WPB Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| WPB Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM A234 WPB Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A234 Gr WPB Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A234 WPB Buttweld Fitting |
| ASTM A234 WPB Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| WPB Carbon Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 234 WPB Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | CS 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM A234 WPB CS Cross
ASTM A234 WPB CS 45 Deg Elbow
ASTM A234 WPB CS Concentric Reducer
ASTM A234 WPB CS Eccentric Reducer
ASTM A234 WPB CS Pipe Cap
ASTM A234 WPB CS 90 Deg Elbow
ASTM A234 WPB CS Lateral Tee
ASTM A234 WPB CS Unequal Tee
ASTM A234 WPB CS Stub End
ASTM A234 WPB CS Tee
ASTM A234 WPB CS Pipe Nipples
ASTM A234 WPB CS Pipe Bends
Carbon Steel A234 WPB Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | P | Cr | Mo |
| A234 WP11 |
0.05-0.2 | 0.3-0.8 | 0.5-1 | ≤0.030 | ≤0.030 | 1-1.5 | 0.44-0.65 |
Carbon Steel A234 WPB Pipe Fittings Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 WP11 |
415-585 | ≥205 | ≥20 |
ASTM A234 WPB Carbon Steel Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASTM A234 WPB Carbon Steel Pipe Fittings Forms & Availability
| Products | Size | |
|---|---|---|
| ASTM A234 WPB Carbon Steel Elbow – Long Radius | ASTM A234 WPB Carbon Steel Stub Ends | Sizes 1/2″ – 48″ |
| ASTM A234 WPB Carbon Steel Elbow – Short Radius | ASTM A234 WPB Carbon Steel Cross | |
| ASTM A234 WPB CS 3D Elbow | ASTM A234 WPB Carbon Steel 5D Elbow | |
| ASTM A234 WPB Carbon Steel Reducing Elbow | ASTM A234 WPB Carbon Steel Reducing Cross | |
| ASTM A234 WPB CS 45° Elbow | ASTM A234 WPB CS Tees | |
| ASTM A234 WPB Carbon Steel Fabricated Tee | ASTM A234 WPB CS End Cap | |
| ASTM A234 WPB CS Reducer | ASTM A234 WPB CS Coupling | |
| ASTM A234 WPB Carbon Steel Concentric Reducer | ASTM A234 WPB Carbon Steel Eccentric Reducer | |
| ASTM A234 WPB Carbon Steel Pipe Nipple | ASTM A234 WPB Carbon Steel Welded Pipe Fittings | |
ASTM A234 WPB Carbon Steel Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-234 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Steel butt-welding fittings |
| MSS SP-43 | Wrought Carbon Steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Russian Steel Pipe Fittings Standard | |
| Gost17375 | Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
| Gost17376 | Carbon and low-alloy steel butt-welding fittings.Tees. Design |
| Gost30753 | Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
| Gost17378 | Carbon and low-alloy steel butt-weldings. Reducers. Design |
| Gost17379 | Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
| Gost17380 | Carbon and low-alloy steel butt-weldings fittings. General specifications |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM A234 WPB Carbon Steel Pipe Fittings
| ASME B16.9 ASTM A234 WPB Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of ASTM A234 Carbon Steel Pipe Fittings
- CS ASTM A234 Pipe Fitting
- ASTM A234 Buttweld Fitting
- Wrought CS WPB Pipe Fittings
- Carbon Steel A234 Welded Fitting
- MSS-SP-43 90 Elbow
- Carbon Steel ASTM A234 45 Elbow
- ASME SA234 CS Eccentric Reducer
- Carbon Steel ASTM A234 Equal Tee
- WPB CS Seamless Fittings
- CS ASTM A234 Lateral Tee
- Carbon Steel ASTM A234 Fitting Cross
- A234 Gr WPB Seamless Buttweld Fittings
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.