Nickel Alloy 200 Flanges, ASTM B564 Nickel 200 Blind Flanges, Nickel DIN 2.4066 Slip on Flanges, B564 Nickel 200 Reducing Flanges Manufacturer, Suppliers

Nickel Alloy 200 Flanges

ASTM B564 Nickel 200 Flanges, Nickel® Alloy 200 Forged Flanges, Alloy 200 Slip on Flange, Nickel DIN 2.4066 Blind Flange Manufacturer in Mumbai, India.

Nickel Alloy 200 Flanges

Nickel Alloy 200 UNS N02200 Flanges

ASTM B564 Nickel Alloy 200 Flanges

Victor Steel is a famous exporter and manufacturer of Nickel 200 Flanges, whichare through and big screwed or welded to the pipe give up and are joined with the bolts.Nickel UNS N02200 Slip On Flanges is a type of gasket that is being made to match among elements of pipe which might be flared as much as provide higher surface area. It has a head with one nut, and is a threaded rod within the corporation of heavy hexagon nuts. In Petro and chemical enterprise for joints, they're being used. Meanwhile, this alloy in inches is equal to the successful thread period this is being measured much like the league, from the primary to the primary thread without the points. However, first thread on this product is defined because the junction of the foremost period of the thread by using the pedestal of the point.

Nickel WNR 2.4066 Blind Flanges has a platter within the corporation of information tap, and more than one flanges by using included taps. It is supposed to apply in a set of gaskets, bolts and nuts and a jackscrew to assist in dividing the flanges for orifice assessment.It is having a gasket appearance within the comparable aircraft just like the bolting circle surface. It additionally includes an inner element with the same length because the pipe and an outside ring by using bolt holes. Meanwhile, using this Ni-200 Spectacle Blind Flanges at points, in which relentless bending strain occurs, ought to be avoided. It is being made of excessive grade metallic that is completely sturdy and rust evidence in built. We are presenting nice class this alloy which might be basically in ring or disc form, and are joined to a pipe with a view to provide an enhanced strength and support. Also, the gasket on this product is located in among the mating flanges for to get maintain of a tighter seal. Functions the usage of this alloy are frequently the ones wherein the right or mating is made up from a casting.

Global Exporter of Nickel Alloy 200 RTJ Flanges, Nickel 200 Slip On Flange, Alloy 200 Socket Weld Flanges, Nickel UNS N02200 WNRF Flange Exporter in India

Nickel Alloy 200 Flanges Specification

B564 Gr 200 Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Nickel Alloy 200 Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Alloy Grade 200 Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM B564 200 Nickel Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SB 564 200 Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SB564 200 Nickel Alloy Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
B564 200 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM B564 200 Nickel Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SB564M Alloy 200 Flange Production technique	Forged, Heat treated and machined
B564 Grade 200 Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME B564 Nickel Alloy 200 Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM B564 Alloy 200 Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Alloy 200 Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of Nickel Alloy ASTM B564 200 Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM B564 200 Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM B564 200 Nickel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SB564M Nickel 200 Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Alloy 200 EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Nickel Alloy 200 Long Weld Neck Flanges

Nickel Alloy 200 Threaded Flanges

Nickel Alloy 200 Orifice Flanges

Nickel Alloy 200 Blind Flanges

Nickel Alloy 200 Slip-on Flanges

Nickel Alloy 200 Nipolet Flanges

Nickel Alloy 200 Lap Joint Flanges

Nickel Alloy 200 Weld Neck Flanges

Nickel Alloy 200 Socket weld Flanges

Nickel Alloy 200 RTJ Flanges

Nickel Alloy 200 Spectacle Blind Flanges

Nickel Alloy 200 Spades Ring Spacers Flanges

Nickel Alloy 200 Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Nickel 200	2.4066	N02200	NW 2200	NA 11	НП-2	N-100M	Ni 99.2

Nickel Alloy 200 Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 200	0.15 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Nickel Alloy 200 Flanges Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Manufacturing Standards/Pressure Rating of Nickel Alloy 200 Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Nickel Alloy 200 Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SB-564	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	Alloy 200 PN10 Flanges, 201 Nickel DIN PN 10 Flanges, 200 Nickel PN16 Flange
DIN PN20, PN25	Alloy 201 PN20 Flanges, 200 Nickel® Alloy DIN PN 25 Flanges
DIN PN40, PN50	Alloy 201 PN40 Flanges, 200 Nickel DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	Nickel 201 5K SORF Flanges, 200 Nickel 10K SOFF Flanges
JIS 16K, 20K	Nickel 201 16K Blind Flanges, 200 Nickel Alloy 20K BLRF Flanges
JIS 30K, 40K	Nickel 201 30K Slip on Flanges, 200 Nickel 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	Nickel 201 BS 10 Table D Flanges, 200 Table D Pipe Flange
BS 10 Table E	Nickel 201 BS 10 Table E Flanges, 200 Table E Pipe Flange
BS 10 Table F	Nickel Alloy 201 BS 10 Table E Flanges, 200 Nickel Alloy Table E Flanges
BS 10 Table H	Nickel 201 BS 10 Table E Flanges, Nickel Alloy 200 Table E Pipe Flanges

Schedule / Class of Nickel Alloy 200 Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Nickel 201 Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	Nickel Alloy 200 Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Nickel 201 Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	Nickel Alloy 200 Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Nickel 201 Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	Nickel Alloy 200 Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Nickel 201 Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	Nickel Alloy 200 Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Nickel 201 Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	Nickel Alloy 200 Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Nickel 201 Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	Nickel Alloy 200 Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Nickel 201 Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Nickel 201 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Nickel Alloy 200 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Nickel 200 Flanges	720 psi