Nickel Alloy 200 Pipe Fittings
ASTM B366 Nickel Alloy 200 Reducer, Nickel UNS N02200 Reducing Tee, Alloy 200 Two Joint Pipe Fittings, Nickel 200 Unequal Cross Manufacturer in India.
Victor Steel is anacknowledged stockist and exporter of Nickel 200 Pipe Fittings, which is considered for its notable corrosion properties. Nickel UNS N02200 Elbow Pipe Fittings has accurate strength and pretty accurate corrosion resistance as usually provided hardened and tempered. This steel has a huge variety of properties that may be advanced with distinct warmness treatments, with remaining tensile strengths. This steel combines advanced put on resistance of excessive carbon alloys with the superb corrosion resistance of chromium stainless steels. In addition, this steel presents superb corrosion resistance plus excessive strength and hardness. This steel is simply enough sufficient to illustrate corrosion resistance properties in slight steam, atmospheres and plenty of slight chemical environments. Heat dealt with this steel has mechanical properties akin to the engineering alloy steel.
Nickel WNR 2.4066 45-Degree Elbow Pipe Fittings is available in distinct shapes and sizes for our customers. This product gives accurate resistance to excessive temperature corrosion and oxidation. This product have superb corrosion resistance in evaluation with different steels as they comprise greater chromium. This product has superb resistance to suffixation, oxidation and different forms of hot corrosion. This product is a ferrite stainless steel with scaling resistance as much as 2000 Degree F (1090 Degree C). This product is non-hardenable however have superb corrosion resistance at very better temperatures. For production elements, this product have to be proof against scaling as much as approximately 1150 Degree C. This product has incredible resistance to lowering sulphurous gases. The superb corrosion resistance of this non-hardenable and ferrite product is because of the excessive chromium content material. Ni-200 90-Degree Elbow Pipe Fittings has accurate resistance to corrosion and oxidation at excessive temperatures wherein pressure situations are low. This product has superb corrosion and oxidation, alongside corrosion scaling. This product is generally utilized in excessive temperature applications from the variety of 1500 degree F to 2200 degree F. Composition and processing of top notch hard this product is designed with assist of computer-aided thermodynamic moulding. This steel combines molybdenum and copper with iron for highly multiplied resistance to decreasing acids like sulphuric acid.
Nickel DIN 2.4066 Butt weld Reducer, Nickel Alloy 200 Buttweld Pipe Bend, Alloy 200 Two Joint Pipe Fittings, ASME SB366 Nickel Alloy 200 Pipe Elbow Suppliers iin Mumbai,India.
ASTM B366 Nickel 200 Buttweld Fittings Specification
200 Nickel Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
---|---|
200 Nickel Alloy Pipe Fittings size | Nickel 200 Seamless Butt Weld Fittings : 1/2" - 10" Nickel 200 Welded Butt Weld Fittings : 1/2" - 48" |
Alloy 200 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Nickel 200 Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Alloy 200 Buttweld Pipe FittingsType | DN15-DN1200 |
ASTM B366 Nickel 200 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 200 Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 200 Buttweld Fitting |
ASTM B366 Nickel 200 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
200 Nickel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 366 Nickel 200 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | Alloy UNS N02200, N02200 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
ASTM B366 Nickel Alloy 200 Cross
ASTM B366 Nickel Alloy 200 45 Deg Elbow
ASTM B366 Nickel Alloy 200 Eccentric Reducer
ASTM B366 Nickel Alloy 200 Pipe Cap
ASTM B366 Nickel Alloy 200 Pipe Nipples
ASTM B366 Nickel Alloy 200 Pipe Bends
ASTM B366 Nickel Alloy 200 90 Deg Elbow
ASTM B366 Nickel Alloy 200 Lateral Tee
ASTM B366 Nickel Alloy 200 Unequal Tee
ASTM B366 Nickel Alloy 200 Stub End
ASTM B366 Nickel Alloy 200 Tee
ASTM B366 Nickel Alloy 200 Concentric Reducer
ANSI B16.9 Nickel 200 Buttweld Fittings Equivalent Grade Specification
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 200 | N02200 | 2.4066 | N-100M | Ni 99.2 | NW 2200 | NA 11 | НП-2 |
Nickel 200 Buttweld Fittings Chemical Composition
Nickel 200 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
99.0 min | 0.15 max | – | 0.35 max | 0.1 max | 0.4 max | – | 0.01 max | 0.25 max | – |
Nickel 200 Buttweld Fittings Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
ASTM B366 Nickel 200 Pipe Fittings Dimensions Standard
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Pressure Rating Class of Nickel 200 Fittings
Pressure-Temperature ratings for Nickel 200 Pipe Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
ASTM B366 Nickel 200 Buttweld Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SA-366 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Nickel butt-welding fittings |
MSS SP-43 | Wrought Nickel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM B366 Nickel 200 Pipe Fittings
ASME B16.9 ASTM B366 200 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Nickel Alloy 200 Pipe Fittings
- Nickel 200 Concentric Reducer
- MSS SP-79 Nickel 200 End Pipe Cap
- Nickel Alloy 200 Eccentric Reducer
- Alloy 200 Buttweld Swage Nipple
- Nickel Alloy NW 2200 45Deg. Pipe Elbow
- Nickel 200 JIS NCF Stub Ends
- ASME SB366 Grade 201 Pipe Bends
- 200 Nickel Pipe Elbow
- Alloy 201 180° LR Return Bend
- 200 Nickel Alloy Seamless Reducing Tee
- Nickel DIN 2.4068 Seamless Fittings
- Grade 200 Nickel Two Halve Butt weld Fittings