Monel 400 Pipe Fittings
Monel 400 Pipe Fittings, Ready Stock of NiCu30Fe Monel Buttweld Elbow, Monel Alloy 400 Pipe Elbow, Monel UNS N04400 Equal Tee Exporter in Mumbai,India.
Victor Steel is anacknowledged seller and manufacturer of Monel Alloy 400 Pipe Fittings, which has the best tensile and creep strength properties at accelerated temperatures. Due to its low carbon content material, this product additionally presents resistance to sensitization whilst welded. Monel UNS N04400 Stub End Pipe Fittings are used within the Food, Marine, Pharmaceutical, and Architecture industries. It is stabilized through the additions of chromium and tantalum. However, tantalum on this steel happens in nature alongside columbium. This steel is used to make radiant super-warmers and boiler tubes. This steel is observed in applications that call for excessive temperature resistance. This steel shape some other organization called precipitation-hardened steels that are an aggregate of martensitic and austenitic alloys.
Monel WNR 2.4360 Long Stub End Pipe Fittings is advanced to offer a kind of alloy in company of the stepped forward inter-granular-corrosion resistance. This steel has terrific resistance to inter-granular corrosion after publicity to temperatures within the chromium carbide precipitation variety of 427 Degree C – 816 Degree C. This steel follows persuasive to temperatures within the chromium carbide precipitation variety from 800 Degree F to 1500 Degree F. This steel is foremost for aqueous temperature environments because of its excellent resistance to inter-granular attack. This steel is considerably inured to the impact of sulphurous gases, particularly above 900 Degree C, which may be very low. It is frequently provided within the hardened condition. This steel gives each outstanding put on and corrosion resistance. Nickel Alloy 400 Short Stub End Pipe Fittings may be heat dealt by means of having to reap an extensive variety of mechanical properties. The corrosion resistance of this steel may be similarly greater by means of having the aid of using a sequence of processes. This steel combines advanced put on resistance of excessive carbon alloys by means of having the first-rate corrosion resistance of chromium alloys. This steel is magnetic in each the annealed and hardened situations. This steel has properly effect corrosion, strength, and scaling resistance as much as 1200 Degree F (649 Degree C).It is appropriate for provider in aqueous temperature environments.
400 Monel 45 degree Elbow, Monel DIN 2.4360 Cross, Monel Alloy 400 Buttweld Cross, ASTM B366 Nickel Alloy 400 90 degree Elbow Supplier in India.
Monel 400 Pipe Fittings Specification
400 Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
---|---|
400 Monel Alloy Pipe Fittings size | 400 Seamless Butt Weld Fittings : 1/2" - 10" 400 Welded Butt Weld Fittings : 1/2" - 48" |
Alloy 400 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Monel 400 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
400 Buttweld Pipe FittingsType | DN15-DN1200 |
ASTM B366 400 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 400 Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 400 Buttweld Fitting |
ASTM B366 400 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
400 Monel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 366 400 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | Alloy UNS N04400, N04400 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Monel 400 Cross
Monel 400 45 Deg Elbow
Monel 400 90 Deg Elbow
Monel 400 Lateral Tee
Monel 400 Unequal Tee
Monel 400 Stub End
Monel 400 Tee
Monel 400 Concentric Reducer
Monel 400 Eccentric Reducer
Monel 400 Pipe Cap
Monel 400 Pipe Nipples
Monel 400 Pipe Bends
Monel 400 Pipe Fittings Equivalent Grade Specification
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
Monel 400 Pipe Fittings Chemical Composition
Monel 400 | Ni | C | Al | Mn | Si | Fe | Cu | S | Co | Cr |
63.0 min | 0.3 max | 0.50 max | 2.0 max | 0.5 max | 1.0 – 2.5 | 28.0 – 34.0 | 0.02 max | – | – |
Monel 400 Pipe Fittings Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
ASTM B366 Monel 400 Pipe Fittings Dimensions Standard
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Monel 400 Buttweld Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SA-366 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Monel 400 Pipe Fittings
ASME B16.9 ASTM B366 Monel 400 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Monel 400 Pipe Fittings
- 400 Monel Seamless Pipe Fittings
- Monel Alloy 400 90° Weldable SR Elbow
- Monel UNS N04400 Pipe Reducers
- ASTM B366 Alloy 400 90° Reducing Elbow
- 400 Nickel Alloy Welded Pipe Fittings
- MSS SP-43 Monel 400 Stub End
- NiCu30Fe Monel Two Joint Pipe Fittings
- 400 Nickel Alloy Seamless Fittings
- ASME SB366 400 Monel Eccentric Reducer
- Monel Alloy 400 Two Halve Butt weld Fittings
- Monel DIN 2.4360 Stub End Exporter
- 400 Alloy Buttweld Reducing Nipple