Alloy 20 Flanges, ASTM B564 Alloy 20 Slip on Flanges, ASTM B564 Alloy 20 Forged Flanges, Alloy 20 Ring Type Joint Flanges Manufacturer, Suppliers

Alloy 20 Flanges

Alloy 20 Nippo Flanges, Carpenter 20 WNRF Flanges, NiCr20CuMo Plate Flanges, Alloy 20 DIN 2.4660 Flanges Suppliers Suppliers in India.

Alloy 20 Flanges

Alloy 20 UNS N08020 Flanges

ANSI B16.5 Alloy 20 Flanges

Victor Steel is a famous manufacturer and stockist of Alloy 20 Flanges, whichare available in more than a few sizes and are taken into consideration through their outside and inside diameter. A non-obligatory hole-weld on this UNS N08020 Slip On Flanges may also possibly be carried out in excessive strain function. However, the bore on this product is counter-bored to well-known pipe, in which the width of the left over bore is comparable because the interior diameter of the pipe. Meanwhile, they have been at the beginning made for utilization on much less great sizes of pipe at advanced strain ratings, however now they're used simply for excessive strain and temperature applications. Quite identified for sturdy creation, matchless nice and advanced functionality; they're obtained from the dependable agencies of the market.

WNR 2.4660 Threaded Flanges Joins assorted diameter pipes and builds a clean bore within the corporation of the perfect grinding and welding. The foremost utilization of this alloy is in excessive strain structures together with hydraulic and steam lines. The application of this steel is to provide admittance to a line for metering of beverages or gases. It is being slipped over the pipe and after that welded each inside and outside to provide sufficient efficiency and additionally to prevent leakage. To meet the nicely aware necessities of our especially esteemed clients, we offer this alloy with real check certificates. Alloy 20Cb3 Weld Neck Flanges is utilized in liking to weld necks through a whole lot of users, for the cause that of its lower cost and the reality that a lesser quantity of precision is wanted while cutting pipe to period. They are generally organized by using an interior width of the pipe flange that is rather larger than the outside thickness of the pipe. It can at instances as properly have a ring/boss or focal point, and may be made thru a bore to head properly with both tube and pipe. It may be used to keep water, as they're difficult to corrosion and acid. They are generally utilized in business vessels and on energy plants, for the cause that in their vital benefits.

Alloy 20 RTJ Flange, ASME SB462 Carpenter 20 Ring Type Joint Flanges, Alloy 20Cb-3 Lap Joint Flange, Monel UNS N08020 Socket Weld Flanges Manufacturer Manufacturers in Mumbai, India.

Alloy 20 Flanges Specification

B462 Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Carpenter 20 Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Alloy 20 Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM B462 Alloy 20 Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SA 462 Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SB462 Carpenter 20 Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
B462 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM B462 Alloy 20 Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SA462M Incoloy 20 Flange Production technique	Forged, Heat treated and machined
B462 Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME SA462 Incoloy Alloy 20 Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM A462 Nickel Alloy 20 Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Alloy 20 Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of Carpenter 20 ASTM B462 Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM B462 Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM B462 Alloy 20 Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SA462M Alloy 20 Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Alloy 20 EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Alloy 20 Nipolet Flanges

Alloy 20 Lap Joint Flanges

Alloy 20 Weld Neck Flanges

Alloy 20 Long Weld Neck Flanges

Alloy 20 Screwed Flanges

Alloy 20 Orifice Flanges

Alloy 20 Blind Flanges

Alloy 20 Slip-on Flanges

Alloy 20 Spectacle Blind Flanges

Alloy 20 Groove & Tongue Flanges

Alloy 20 Socket weld Flanges

Alloy 20 RTJ Flanges

Alloy 20 Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	EN	AFNOR
Alloy 20	2.4660	N08020	NiCr20CuMo	Z2NCUD31-20AZ

Alloy 20 Chemical Composition

Grade	C	Mn	Si	S	Cu	Ni	Cr	Fe	Mo	P
Alloy 20	0.07 max	2.00 max	1.00 max	0.035 max	3.00 – 4.00	32.00 – 38.00	19.00 – 21.00	29.85 min*	2.00 – 3.00	0.045 max

Alloy 20 Flanges Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Alloy 20	8.1 g/cm3	1443 °C (2430 °F)	Psi -80,000, MPa -551	Psi - 35,000, MPa - 241	30 %

ANSI B16.5 Alloy 20 Flanges Forms & Availability

Products		Size
ASTM A462 Alloy 20 Slip-On Flanges	ASTM A462 Alloy 20 Threaded Flanges	Sizes 1/8″ – 36″ Raised Face or Flat Face
ASTM A462 Alloy 20 Weld Neck Flanges	ASTM A462 Alloy 20 Socket Weld Flanges
ASTM A462 Alloy 20 Blind Flanges	ASTM A462 Alloy 20 Reducing Flanges
ASTM A462 Alloy 20 Lap Joint Flanges	ASTM A462 Alloy 20 Plate Flanges
ASTM A462 Alloy 20 Orifice Flanges	ASTM A462 Alloy 20 Forged Flanges
ASTM A462 Alloy 20 Ring Type Joint Flanges	ASTM A462 Alloy 20 Square Flanges

Manufacturing Standards/Pressure Rating of Alloy 20 Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Alloy 20 Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SA-462	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	Alloy 20 PN10 Flanges, Alloy 20 DIN PN 10 Flanges, Alloy 20 PN16 Flange
DIN PN20, PN25	Alloy 20 PN20 Flanges, Alloy 20 DIN PN 25 Flanges
DIN PN40, PN50	Alloy 20 PN40 Flanges, Alloy 20 DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	Alloy 20 5K SORF Flanges, Alloy 20 10K SOFF Flanges
JIS 16K, 20K	Alloy 20 16K Blind Flanges, Alloy 20 20K BLRF Flanges
JIS 30K, 40K	Alloy 20 30K Slip on Flanges, Alloy 20 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	Alloy 20 BS 10 Table D Flanges, Alloy 20 Table D Pipe Flange
BS 10 Table E	Alloy 20 BS 10 Table E Flanges, Alloy 20 Table E Pipe Flange
BS 10 Table F	Alloy 20 BS 10 Table E Flanges, Alloy 20 Table E Flanges
BS 10 Table H	Alloy 20 BS 10 Table E Flanges, Alloy 20 Table E Pipe Flanges

Schedule / Class of Alloy 20 Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Alloy 20 Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	Carpenter 20 Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Alloy 20 Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	Carpenter 20 B462 Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Alloy 20 Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	Carpenter 20 Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Alloy 20 Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	Carpenter 20 Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Alloy 20 B462 Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	Carpenter 20 Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Alloy 20 Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	Carpenter 20 Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Alloy 20 Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Alloy 20 B462 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Alloy 20 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Alloy 20 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Alloy 20 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Alloy 20 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Alloy 20 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Alloy 20 B462 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Carpenter 20 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Alloy 20 Flanges	720 psi