Stainless Steel 310/310S Pipe Fittings
SS 310S Concentric Reducer, X15CrNi25-20 Stainless Steel 310 Buttweld Elbow, Stainless Steel 310S SR Elbow, SS DIN 1.4841 Eccentric Reducer exporter in Mumbai, India, Saudi Arabia, Qatar, Kingdom Of Bahrain.
Stainless Steel 310/310S Pipe Fittings
SS UNS S31000/S31008 Pipe Fittings
Victor Steel is anacknowledged supplier and exporter of Stainless Steel 310 / 310S Pipe Fittings, which is available at cost-effective rates to our clients. Stainless Steel UNS S31000 Stub End Pipe Fittings is broadly used in lots of fields, particularly marine and chemical processing. This product has excessive strength and may be hardened best with the aid of using cold working. The Curie Temperature of this product lies within the ambient temperature variety. Forging of this Stainless Steel WNR 1.4841 Long Stub End Pipe Fittings can be performed among 2150 Degree F (1175 Degree C) and 1200 Degree F (650 Degree C). The corrosion resistance of this product is precise sturdy in speedy flowing brackish water or seawater. It is proof against a sour-fueloline environment.
310 Stainless Steel Short Stub End Pipe Fittings may be further strengthened with the aid of using cold working earlier than the precipitation hardening. This steel may be introduced within the annealed, pressure equalized, hot completed or age-hardened conditions. The thermal processing on this steel used to impact precipitation is generally referred to as age hardening or aging. Stainless Steel 310S End Cap Pipe Fittings may be fabricated with the aid of using standard industrial procedures. This steel is regularly utilized in Doctor Blades and scrapers, Oil-nicely drill collars and instruments, etc. This steel is in any other case self-age-hardening with a purpose to be installation within the solid part, main to pressure and viable cracking. Aluminium and copper on this Stainless Steel WNR 1.4845 Dish Cap Pipe Fittings perhaps selectively oxidized during heating, leaving a magnetic nickel-rich film at the out of doors of the piece. When within the age-hardened situation, this steel has a more tendency towards pressure-corrosion cracking in a few environments. 310S Stainless Steel Reducer Pipe Fittings is broadly utilized in marine environments because of its incredible corrosion resistance. This product is used drastically in (for pipe) piping. This product has incredible resistance to unexpectedly flowing brackish or seawater wherein cavitation and erosion resistance is necessary.
Stainless Steel 310 Pipe End Cap, SS 310S Long Stub End, Buy SS UNS S31000 Butt weld Reducer, WP310S Stainless Steel Dish Cap Supplier in Mumbai, India, Qatar, France, Russia.
ANSI B16.9 Stainless Steel 310 / 310S Pipe Fittings Specification
| 310 / 310S Pipe Fittings Specifications | ASTM A403/ ASME SA403 |
|---|---|
| 310 / 310S SS Pipe Fittings size | 310 / 310S Seamless Butt Weld Fittings : 1/2" - 10" 310 / 310S Welded Butt Weld Fittings : 1/2" - 48" |
| SS 310 / 310S Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Stainless Steel 310 / 310S Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 310 / 310S Buttweld Pipe Fittings Type | DN15-DN1200 |
| ASTM A403 310 / 310S Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP310 / 310S Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 310 / 310S Buttweld Fitting |
| ASTM A403 WP310 / 310S Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 310 / 310S Stainless Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 403 WP310 / 310S Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | SS UNS S31000, S31008 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Stel 310/310S Cross
Stainless Stel 310/310S Stub End
Stainless Stel 310/310S Tee
Stainless Stel 310/310S 45 deg Elbow
Stainless Stel 310/310S Concentric Reducer
Stainless Stel 310/310S Eccentric Reducer
Stainless Stel 310/310S Pipe Cap
Stainless Stel 310/310S Pipe Nipples
Stainless Stel 310/310S Pipe Bend
Stainless Stel 310/310S Pipe Collar
Stainless Stel 310/310S Lateral Tee
Stainless Stel 310/310S 90 Deg Elbow
Stainless Steel 310/310S Pipe Fittings Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
Stainless Steel 310/310S Pipe FittingsChemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Stainless Steel 310/310S Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
310/310S SS Butt weld Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Stainless Steel 310/310S Pipe Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Stainless Steel 310/310S Pipe Fittings
| ASME B16.9 ASTM A403 WP310/310S Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Stainless Steel 310/310S Pipe Fittings
- 310 SS Seamless Pipe Fittings
- Stainless Steel 310S 90° LR Elbow
- WP310 Stainless Steel 90° Weldable SR Elbow
- SS UNS S31000 Pipe Reducers
- ASTM A403 SS 310S 90° Reducing Elbow
- 310 Stainless Steel Pipe Tee
- 310S SS 180° LR Return Bend
- Stainless Steel 310 Seamless Reducing Tee
- SS DIN 1.4841 Seamless Fittings
- X15CrNi25-20 SS 90° Seamless Elbow Dealer
- Stainless Steel 310S Weldable 1.5D Elbow
- SS WP310 Two Halve Butt weld Fittings
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.