Stainless Steel 316TI Pipe Fittings
SS UNS S31635 Seamless Pipe Fittings, Stainless Steel 316Ti 180 Deg bend, SS 316Ti Lateral Tee, 316Ti Stainless Steel Long stub end, Stainless Steel 316Ti 1.5d Bends Exporter in Mumbai, India, Saudi Arabia, Qatar, Kingdom Of Bahrain.
Victor Steel is anacknowledged supplier and distributor of SS 316Ti Pipe Fittings, which shows top notch weldability in nature. These Stainless Steel UNS S31635 Equal Tee Pipe Fittings are labelled as slight with tough while machining, wherein it additionally has very excessive strength and hardness. In stagnant or sluggish-shifting sea water, fouling on this steel may also arise observed with the aid of using pitting, however this pitting slows down after a reasonably speedy preliminary attack. Though used for a huge range of applications, this steel is in particular famous in some of fields inclusive of chemical Industry (valves and pumps). Cold forming within the annealed situation of this steel also can be carried out using standard techniques even though may also require sizeable strength to shape.
Solution annealing on this Stainless Steel WNR 1.4571 Unequal Tee Pipe Fittings will have an effect on answer of any levels with a purpose to later have an effect on the age hardening system. In no occasion need to this product be heated above 2150 Degree F (1175 Degree C).Generally, the corrosion resistance of this product is excellent in lowering environments, however terrible in oxidizing situations. This product has incredible mechanical properties at sub-zero temperatures. This product has top notch mechanical properties at sub-zero temperatures. This product costs several instances as plenty as regular alloy that desires to be became and worked at sluggish speeds and occasional feed rates. Cold working on this product can be achieved the usage of smooth die materials for higher finishing. Both hot-rolled and cold-rolled material on this 316Ti Stainless Steel Lateral Tee Pipe Fittings can be subjected to, and could earnings from, an annealing remedy at temperatures various among 1300 Degree F and 1800 Degree F. The ratio of copper to nickel on this product is sort of same to that discovered within the ore the steel is derived from. This product resists corrosion via way of means of dry chlorine and hydrogen chloride and isn't prone to strain corrosion cracking. It reveals properly resistance to hydrofluoric and dilute non-oxidizing acids, alkalis and salts.
SS DIN 1.4571 Concentric Reducer, Stainless Steel 316Ti End Pipe Cap, 316Ti Stainless Steel Pipe End Cap Supplier SS X6CrNiMoTi17-12-2 Buttweld Elbow Supplier in Mumbai, India, Qatar, France, Russia.
ANSI B16.9 Stainless Steel 316Ti Pipe Fittings Specification
316Ti Pipe Fittings Specifications | ASTM A403/ ASME SA403 |
---|---|
316Ti SS Pipe Fittings size | 316Ti Seamless Butt Weld Fittings : 1/2" - 10" 316Ti Welded Butt Weld Fittings : 1/2" - 48" |
SS 316Ti Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Stainless Steel 316Ti Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
316Ti Buttweld Pipe Fittings Type | DN15-DN1200 |
ASTM A403 316Ti Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP316Ti Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A403 WP 316Ti Buttweld Fitting |
Form | 90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap |
ASTM A403 WP316Ti Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
316Ti Stainless Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 403 WP316Ti Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | SS UNS S31635 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Stainless Stel 316Ti Cross
Stainless Stel 316Ti Stub End
Stainless Stel 316Ti Tee
Stainless Stel 316Ti 45 deg Elbow
Stainless Stel 316Ti Concentric Reducer
Stainless Stel 316Ti Eccentric Reducer
Stainless Stel 316Ti Pipe Cap
Stainless Stel 316Ti Pipe Nipples
Stainless Stel 316Ti Pipe Bend
Stainless Stel 316Ti Pipe Collar
Stainless Stel 316Ti Lateral Tee
Stainless Stel 316Ti 90 Deg Elbow
Stainless Steel 316Ti Pipe Fittings Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
Stainless Steel 316Ti Pipe Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 316Ti | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.395 min |
Stainless Steel 316Ti Pipe Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Sus 316Ti SS Butt weld Pipe Fittings Dimensions Standard
Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Stainless Steel 316Ti Pipe Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SA-403 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Stainless Steel 316Ti Pipe Fittings
ASME B16.9 ASTM A403 WP316Ti Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Stainless Steel 316TI Pipe Fittings
- Stainless Steel 316Ti 90° LR Elbow
- SS UNS S31635 Pipe Reducers
- 316Ti Stainless Steel Seamless Pipe Fittings
- ASTM A403 SS 316Ti 90° Reducing Elbow
- MSS SP-43 Stainless Steel 316Ti Stub End
- Stainless Steel WP316Ti Pipe Elbow
- 316Ti Stainless Steel Buttweld Reducing Nipple
- SUS 316Ti Seamless Buttweld Fittings
- SS DIN 1.4571 Pipe Fittings
- X6CrNiMoTi17-12-2 SS Two Joint Pipe Fittings
- ASTM A403 Stainless Steel 316Ti Eccentric Reducer
- SS 316Ti Wrought Austenitic 45 Degree Elbow