Cu-Ni 90/10 Pipe Fittings
Copper Nickel 90/10 45 degree Elbow, ASTM B366 Cupro Nickel 90/10 90 degree Elbow, Cu-Ni UNS C71500 Nickel End Cap, Cu-Ni 90/10 Equal Tee, Manufacturer in Mumbai,India.
Cupro Nickel 90/10 Pipe Fittings
ASTM B466 Cu-Ni 90/10 Pipe Fittings
Victor Steel is anacknowledged seller and stockist of Copper Nickel 90 / 10 Pipe Fittings, which is designed basically for accelerated strength and corrosion resistance. Corrosion resistance is stepped forward on this product, especially in opposition to sulphuric and hydrochloric acids. Cupro Nickel 90 / 10 Tee Pipe Fittings incorporates excessive nickel content material and an excessive quantity of chromium. Post-weld annealing for this product isn't always required while welding skinny sections. For out of doors furniture like rails and bollards, this product is a really perfect corrosion-resistant material. This product are non-hardenable through warmness remedy and may be readily formed and drawn. It does now no longer go through uniform corrosion, like carbon steel, while uncovered to moist environments.
Copper Nickel UNS C70600 Cross Pipe Fittings hardens swiftly for the duration of mechanical working, and so possesses superb mechanical and corrosion properties at sub-zero temperatures. This product has a top notch formability and weldability, and so is regularly utilized in oil & petroleum refining equipment. This product reveals limited applications because of their bad mechanical properties and because of the presence of porosity. A unique characteristic for this steel is excessive chromium and excessive nickel contents. It exists because the preferred material in lots of specifications. It gives stepped forward corrosion resistance. This steel possesses the identical excessive strength and corrosion resistance. It is better molybdenum austenitic steels by means of having the aid of better nickel alloy content material. Copper Nickel WNR 2.0872 Bend Pipe Fittings may be utilized in applications wherein it isn't always feasible to anneal after welding and wherein most corrosion resistance is required. It has substantially accelerated resistance to chemical attack compared to the traditional chromium - nickel austenitic alloys. This steel can produce more potent welds because of the low carbon content material. They are excessive - appearing in phrases of durability, tensile strength, and corrosion resistance. This steel consist approximately four percentage to 30 percentage of chromium. They are greater proof against widespread corrosion and pitting / crevice corrosion than the traditional chromium - nickel austenitic alloys.
ASME SB366 CuNi 90-10 Long Stub, 90/10 Copper Nickel Pipe Fittings, Cu-Ni DIN 2.0872 Cross, Cupro Nickel 90/10 3d Pipe Bend Suppliers in Mumbai,India.
Cupro Nickel 90/10 Pipe Fittings Specification
| Cupro Nickel 90/10 Pipe Fittings Specifications | ASTM B466/ ASME SB466 |
|---|---|
| Cupro Nickel 90/10 Pipe Fittings size | Cupro Nickel 90/10 Seamless Butt Weld Fittings : 1/2" - 10" Cupro Nickel 90/10 Welded Butt Weld Fittings : 1/2" - 48" |
| Cupro Nickel 90/10 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1800, BS10 |
| Cupro Nickel 90/10 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Cupro Nickel 90/10 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM B466 Cupro Nickel 90/10 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B466 Cu-Ni 90/10 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B466 Cu-Ni 90/10 Buttweld Fitting |
| ASTM B466 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| Cu-Ni 90/10 Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SB 466 Cu-Ni 90/10 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | Cu-Ni 90/10, CS 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| Forms | Equal Tee, Nipple, Long Radius Elbow, Reducing Tee, Elbows, Swage Nipple, Short Radius Elbow, Reducer, Barrel Nipple, 90 Deg Elbow, Concentric Reducer, Reducing Nipple, 45 Deg Elbows, Eccentric Reducer, Bend, 180 Deg Elbow, End Cap, 1D Elbow, 3D Elbow, Stubend, 5D Elbow, Cap, Piggable Bend, Long Stubend, Tee, Short Stubend, Long Radius Bend. |
ASTM B466 Cu-Ni 90/10 Cross
ASTM B466 Cu-Ni 90/10 45 Deg Elbow
ASTM B466 Cu-Ni 90/10 Concentric Reducer
ASTM B466 Cu-Ni 90/10 Eccentric Reducer
ASTM B466 Cu-Ni 90/10 Pipe Cap
ASTM B466 Cu-Ni 90/10 90 Deg Elbow
ASTM B466 Cu-Ni 90/10 Lateral Tee
ASTM B466 Cu-Ni 90/10 Unequal Tee
ASTM B466 Cu-Ni 90/10 Stub End
ASTM B466 Cu-Ni 90/10 Tee
ASTM B466 Cu-Ni 90/10 Pipe Nipples
ASTM B466 Cu-Ni 90/10 Pipe Bends
ASTM B466 Cu-Ni 90/10 Pipe Fitings Equivalent Grade Specification
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 90/10 | C70600 | 2.0872 |
ASTM B466 Cu-Ni 90/10 Pipe Fitings Chemical Composition
| Cu-Ni 90/10 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
ASTM B466 Cu-Ni 90/10 Pipe Fitings Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
ASTM B466 Cu-Ni 90/10 Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Pressure Rating Class of Cu-Ni 90/10 Fittings
| Pressure-Temperature ratings for 90/10 Copper Nickel Pipe Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
ASTM B466 Cu-Ni 90/10 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SB-466 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Steel butt-welding fittings |
| MSS SP-43 | Wrought Carbon Steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Russian Steel Pipe Fittings Standard | |
| Gost17375 | Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
| Gost17376 | Carbon and low-alloy steel butt-welding fittings.Tees. Design |
| Gost30753 | Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
| Gost17378 | Carbon and low-alloy steel butt-weldings. Reducers. Design |
| Gost17379 | Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
| Gost17380 | Carbon and low-alloy steel butt-weldings fittings. General specifications |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM B466 Cu-Ni 90/10 Pipe Fittings
| ASME B16.9 ASTM B466 WPB Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Cu-Ni 90/10 Pipe Fittings
- 90-10 Copper Nickel 90 Elbow
- Cupro Nickel 90-10 45 Elbow
- Cu-Ni UNS C70600 Long Radius Elbow
- ASTM B122 Cu-Ni 90-10 Short Radius Elbow
- Copper Nickel 90-10 Concentric Reducer
- Grade 70/30 Cu-Ni Welded Fitting
- Copper Nickel 90-10 Equal Tee
- Cu-Ni UNS C70600 Unequal Tee
- Cupro Nickel 90-10 Lateral Tee
- 90-10 Copper Nickel Fitting Cross
- ASME SB122 Cu-Ni 90-10 Pipe Bends
- Copper Nickel Alloy 70/30 U Bend
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.