Cu-Ni 70/30 Pipe Fittings
Cupro Nickel 70/30 Welded Fitting, ASTM B122 Cu-Ni 70-30 Pipe Fitting, Cu-Ni UNS C71500 Copper Nickel 90Deg & 45 Deg Elbow, MSS-SP-43 Cu-Ni 70-30 Reducer Suppliers in Mumbai,India.
Victor Steel is anacknowledged stockist and manufacturer of Copper Nickel 70 / 30 Pipe Fittings, which are hardenable steels and possesses superb corrosion resistance. Cupro Nickel 70 /30 Equal Tee Pipe Fittings has accelerated additions of nickel, chromium, and molybdenum for higher corrosion resistance. This steel presents stepped forward corrosion resistance over different steels. This product is ideal to apply in heavy gauge welded components. It is stabilized by means of having a columbium, and soth is product makes use of columbium as a stabilizing detail to maximise its fundamental feature: resistance to inter-granular corrosion. This product is a non-warmness treatable, austenitic and electric powered furnace processed grade of alloy. It is not unusual within the petroleum refining industries. This product have excessive corrosion resistance than different steels as a result of the presence of big quantities of chromium.
Copper Nickel UNS C71500 Unequal Tee Pipe Fittings is an excessive carbon austenitic chromium stainless steel. In addition, this product has barely stepped forward corrosion resistance in strongly oxidizing environments. It has widespread corrosion resistance and relatively higher resistance in robust oxidizing situations. This product gives a superb resistance to inter-granular corrosion. It lets in for the removal of carbide precipitation, and, consequently, inter-granular corrosion. This product is used for production elements which have to be proof against scaling as much as approximately 1050 Degree C. It is an austenitic steel alloy in company ofcarried Niobium / Columbium which acts as a stabilizer. Copper Nickel WNR. 2.0882 Lateral Tee Pipe Fittings is stabilized in opposition to chromium carbide formation through the addition of columbium and tantalum. Moreover, this steel is a simple martensitic grade which incorporates certain percentage chromium, and so is magnetic in each the annealed and hardened situations. It is the overall cause certain percentage of chromium martensitic steel. Meanwhile, this steel presents accurate corrosion resistance properties. It attains excessive mechanical properties after warmness remedy. This steel is the overall cause and maximum extensively used of all of the Martensitic grades of steels. Further, it is regularly utilized in cutlery, hardware and micrometer elements.
ASME SB122 70-30 Cu-Ni Short Radius Elbow, Copper Nickel 70-30 Elbow,70-30 Cupro Nickel Seamless Pipe Fitting, Cu-Ni DIN 2.0882 Cu-Ni 70-30 Butt weld Fittings Manufacturer in Mumbai,India.
Cupro Nickel 70/30 Pipe Fittings Specification
Cupro Nickel 70/30 Pipe Fittings Specifications | ASTM B466/ ASME SB466 |
---|---|
Cupro Nickel 70/30 Pipe Fittings size | Cupro Nickel 70/30 Seamless Butt Weld Fittings : 1/2" - 10" Cupro Nickel 70/30 Welded Butt Weld Fittings : 1/2" - 48" |
Cupro Nickel 70/30 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1800, BS10 |
Cupro Nickel 70/30 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Cupro Nickel 70/30 Buttweld Pipe FittingsType | DN15-DN1200 |
ASTM B466 Cupro Nickel 70/30 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B466 Cu-Ni 70/30 Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B466 Cu-Ni 70/30 Buttweld Fitting |
ASTM B466 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
Cu-Ni 70/30 Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SB 466 Cu-Ni 70/30 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | Cu-Ni 70/30, CS 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
Forms | Equal Tee, Nipple, Long Radius Elbow, Reducing Tee, Elbows, Swage Nipple, Short Radius Elbow, Reducer, Barrel Nipple, 90 Deg Elbow, Concentric Reducer, Reducing Nipple, 45 Deg Elbows, Eccentric Reducer, Bend, 180 Deg Elbow, End Cap, 1D Elbow, 3D Elbow, Stubend, 5D Elbow, Cap, Piggable Bend, Long Stubend, Tee, Short Stubend, Long Radius Bend. |
ASTM B466 Cu-Ni 70/30 Cross
ASTM B466 Cu-Ni 70/30 45 Deg Elbow
ASTM B466 Cu-Ni 70/30 Concentric Reducer
ASTM B466 Cu-Ni 70/30 Eccentric Reducer
ASTM B466 Cu-Ni 70/30 Pipe Cap
ASTM B466 Cu-Ni 70/30 90 Deg Elbow
ASTM B466 Cu-Ni 70/30 Lateral Tee
ASTM B466 Cu-Ni 70/30 Unequal Tee
ASTM B466 Cu-Ni 70/30 Stub End
ASTM B466 Cu-Ni 70/30 Tee
ASTM B466 Cu-Ni 70/30 Pipe Nipples
ASTM B466 Cu-Ni 70/30 Pipe Bends
Equivalent Grade Specification
STANDARD | UNS | WERKSTOFF NR. |
Cupro Nickel 70/30 | C71500 | 2.0882 |
ASTM B466 Cu-Ni 70/30 Pipe Fitings Chemical Composition
Cu-Ni 70/30 | Cu | Pb | Mn | Fe | Zn | Ni |
65.0 min | 0.05 max | 1.0 max | 0.4-1.0 | 1 max | 29 – 33 |
ASTM B466 Cu-Ni 70/30 Pipe Fitings Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
0.323 lb/in3 at 68 F | 2260 F | 20000 psi | 50000 psi | 30 % |
ASTM B466 Cu-Ni 70/30 Pipe Fittings Dimensions Standard
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Pressure Rating Class of Cu-Ni 70/30 Fittings
Pressure-Temperature ratings for 70/30 Copper Nickel Pipe Fittings (psig) | |||||
---|---|---|---|---|---|
Temperature Ratings | Pressure Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
ASTM B466 Cu-Ni 70/30 Buttweld Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SB-466 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Steel butt-welding fittings |
MSS SP-43 | Wrought Carbon Steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Russian Steel Pipe Fittings Standard | |
Gost17375 | Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
Gost17376 | Carbon and low-alloy steel butt-welding fittings.Tees. Design |
Gost30753 | Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
Gost17378 | Carbon and low-alloy steel butt-weldings. Reducers. Design |
Gost17379 | Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
Gost17380 | Carbon and low-alloy steel butt-weldings fittings. General specifications |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM B466 Cu-Ni 70/30 Pipe Fittings
ASME B16.9 ASTM B466 WPB Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Cu-Ni 70/30 Pipe Fittings
- 70/30 Copper Nickel 90 Elbow
- Cu-Ni UNS C71500 45 Elbow
- ASTM B122 Cu-Ni 70/30 Short Radius Elbow
- Cupro Nickel 70/30 Concentric Reducer
- 70/30 Cupro Nickel Welded Fitting
- Copper Nickel 70/30 End Cap
- Copper Nickel 70/30 Equal Tee
- Cu-Ni DIN 2.0882 Unequal Tee
- 70/30 Copper Nickel Fitting Cross
- Cupro Nickel 70/30 Lateral Tee
- 70/30 Cu-Ni Short Stub end
- ASME SB467 70/30 Cupro Nickel Equal Cross