Inconel 600 Flanges, UNS N06600 & N06601 Slip on Flanges, Alloy 601 Pipe Flanges, Alloy 601 Soket Weld Flanges Manufacturer, Suppliers

Inconel 600/601 Flanges

Inconel UNS N06600 Pipe Flanges, ASTM B564 601 Orifice Flange, Inconel 600 Slip On Flanges, Alloy 601 SORF Flange Manufacturer in Mumbai, India.

Inconel 600/601 Flanges

Inconel UNS N06600/N06601 Flanges

ASTM B564 Inconel Alloy 600/601 Flanges

Victor Steel is a well-knownseller and distributor of Inconel 600 / 601 Flanges, whichis being designed in particular for increased strength and corrosion resistance. Inconel UNS N06600 Lap Joint Flanges is one of the maximum regularly used commercial fitting, which enables to sign up for tubes or pipes of various diameters. It isn't always properly sufficient to have the joint among pipe and its result in near up nearness with the aid of the joint,under sure layout criterion like stress or temperature etc. The important feature of this Inconel WNR 2.4816 Ring Joint Type Flanges is to lessen the road from a bigger to a smaller pipe length, and this honestly results in a stepped forward glide stress. By approach of this product, the smaller outlet cease is off-centre to the bigger cease, permitting it to array via one facet of the inlet with the different.

Meanwhile, the lengths of this Nickel Alloy 600 Spacer Flangesare set by means of production patterns.Some significant properties of this alloy are excessive corrosion resistance in tough environments, excessive resistance to crevice and pitting corrosion, and lesser inter-granular precipitation. Inconel UNS N06601 Long Weld Neck Flanges are being utilized in one-of-a-kind kinds of industries consisting of pumps & petrochemicals, sugar mills, cement & production industries, and so on. They are used for transmitting one-of-a-kind sorts of liquid from one location to every other with the aid of clean glide. It is an alloy this is being made up by means of the grouping of iron and carbon. Inconel WNR 2.4851 Nippolet Flanges is appreciably demanded in pretty plenty of petrochemical & different industrial industries. They have an exquisite grace and are extraordinarily long-lasting. They are getting used for welding applications in numerous industries. They are available in a number specs and end standards. Nickel Alloy 601 Plate Flanges are having excessive tensile strength and produce other salient properties. Meanwhile, it's far getting used for low stress liquid delivery, consisting of water, gas, and oil. It is getting used for transmitting excessive stress of liquid substance and is available in one-of-a-kind specs.

ASME SB564 Inconel 600 weldo Flanges, Inconel® Alloy 601 Plate Flange, Nickel Alloy 600 Orifice Flange, Inconel DIN 2.4851 Flanges Exporter, NCF 601 Blind Flanges Suppliers in India.

Inconel 600/601 Flanges Specification

B564 Gr 600 Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Inconel Alloy 600 Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Alloy Grade 600 Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM B564 600 Inconel Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SB 564 600 Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SB564 600 Inconel Alloy Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
B564 600 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM B564 600 Inconel Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SB564M Alloy 600 Flange Production technique	Forged, Heat treated and machined
B564 Grade 600 Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME B564 Nickel Alloy 600 Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM B564 Alloy 600 Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Alloy 600 Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of Inconel Alloy ASTM B564 600 Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM B564 600 Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM B564 600 Inconel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SB564M Inconel 600 Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Alloy 600 EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Inconel 600/601 Long Weld Neck Flanges

Inconel 600/601 Threaded Flanges

Inconel 600/601 Orifice Flanges

Inconel 600/601 Blind Flanges

Inconel 600/601 Puddle Flanges

Inconel 600/601 Reducing Flanges

Inconel 600/601 Lap Joint Flanges

Inconel 600/601 Ring Type Joint Flanges

Inconel 600/601 Hub Blind Flanges

Inconel 600/601 Groove & Tongue Flanges

Inconel 600/601 Spectacle Blind Flanges

Inconel 600/601 Weldo-Nipo Flanges

Inconel 600/601 Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 600	2.4816	N06600	NCF 600	NA 13	МНЖМц 28-2,5-1,5	NC15FE11M	NiCr15Fe
Inconel 601	2.4851	N06601	NCF 601	NA 49	XH60BT	NC23FeA	NiCr23Fe

Inconel 600/601 Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 600	0.15 max	1.00 max	0.50 max	0.015 max	0.50 max	6.00 – 10.00	72.00 min	14.00 – 17.00
Inconel 601	0.10 max	1.00 max	0.50 max	0.015 max	1.00 max	Balance	58.0 – 63.0	21.0 – 25.0

Inconel 600/601 Flanges Mechanical Properties

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 600	8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %
Inconel 601	8.1 g/cm3	1411 °C (2571 °F)	Psi – 80,000 , MPa – 550	Psi – 30,000 , MPa – 205	30 %

Manufacturing Standards/Pressure Rating of Inconel 600/601 Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Inconel 600/601 Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SB-564	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	Alloy 600 PN10 Flanges, 600 Inconel DIN PN 10 Flanges, 600 Inconel PN16 Flange
DIN PN20, PN25	Alloy 600 PN20 Flanges, 600 Inconel® Alloy DIN PN 25 Flanges
DIN PN40, PN50	Alloy 600 PN40 Flanges, 600 Inconel DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	Inconel 600 5K SORF Flanges, 600 Inconel 10K SOFF Flanges
JIS 16K, 20K	Inconel 600 16K Blind Flanges, 600 Nickel Alloy 20K BLRF Flanges
JIS 30K, 40K	Inconel 600 30K Slip on Flanges, 600 Inconel 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	Inconel 600 BS 10 Table D Flanges, 600 Table D Pipe Flange
BS 10 Table E	Inconel 600 BS 10 Table E Flanges, 600 Table E Pipe Flange
BS 10 Table F	Nickel Alloy 600 BS 10 Table E Flanges, 600 Inconel Alloy Table E Flanges
BS 10 Table H	Inconel 600 BS 10 Table E Flanges, Inconel Alloy 600 Table E Pipe Flanges

Schedule / Class of Inconel 600/601 Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Inconel 600/601 Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	Inconel Alloy 600/601 Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Inconel 600/601 Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	Inconel Alloy 600/601 Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Inconel 600/601 Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	Inconel Alloy 600/601 Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Inconel 600/601 Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	Inconel Alloy 600/601 Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Inconel 600/601 Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	Inconel Alloy 600/601 Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Inconel 600/601 Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	Inconel Alloy 600/601 Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Inconel 600/601 Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Inconel 600/601 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Inconel Alloy 600/601 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Inconel 600/601 Flanges	720 psi