ASTM A860 Carbon Steel Pipe Fittings
High Yield CS A860 Buttweld Fitting, ASTM A860 High Yield CS Buttweld Fittings, High Yield A860 Gr. WPHY 42 Buttweld Pipe Fittings Manufacturer in Mumbai,India.
ASTM A860 Carbon Steel Pipe Fittings
ASTM A860 WPB CS Pipe Fittings
Victor Steel is anacknowledged seller and distributor of ASTM A860 Carbon Steel Pipe Fittings, which is proof against sure varieties of interactions. ASME SA860 Carbon Steel Reducer Pipe Fittings has the addition of molybdenum and barely better nickel content material. It is perfectly suited for applications requiring corrosion resistance. This product incorporates molybdenum, which will increase their resistance to many chemical corrodes and marine environments. This product gives localized corrosive assault through chlorides and to widespread corrosion through lowering acids, including sulphuric acid. It has especially better resistance to pitting and crevice corrosion in chloride environments. This product is greater proof against widespread corrosion and pitting than traditional nickel chromium steels.
Carbon Steel ASTM A860 Concentric Reducer Pipe Fittings has very excessive immunity from sensitization (grain boundary carbide precipitation).It possesses superb mechanical properties, and sothis steel has especially better resistance to pitting and crevice corrosion in chloride environments. It can resist a whole lot greater time and abuse earlier than displaying symptoms and symptoms of put on. Additions of molybdenum on this steel boom corrosion resistance in lowering acids and in opposition to pitting assault in chloride solutions. The addition of molybdenum and barely better nickel content material make this steel appropriate for architectural applications. The resultant composition of this steel offers a whole lot accelerated corrosion resistance in lots of competitive environments. This steel has accurate extended temperature strength. Carbon Steel ASME SA860 Eccentric Reducer Pipe Fittings are greater proof against widespread corrosion and pitting/crevices than traditional austenitic stainless steels. It is generally utilized in chemical and petrochemical industry. This steel is immune from sensitization (grain boundary carbide precipitation). This steel has better creep resistance. It is advanced to offer stepped forward corrosion resistance in reasonably corrosive environments. The low carbon chemistry of this steel blended with an addition of nitrogen allows to fulfil superb mechanical properties.A warmness remedy after welding for this product is typically now no longer used. This product is located to be greater relevant in regions with excessive or extended temperatures as in comparison to different alloys.
High Yield WPBW Elbow, High Yield Carbon Steel ASME SA860 Fittings, CS ASTM A860 Pipe Fittings Suppliers in Mumbai,India.
ASTM A860 Carbon Steel Pipe Fittings Specification
| ASTM A860 WPHY Pipe Fittings Specifications | ASTM A860/ ASME SA860 |
|---|---|
| ASTM A860 WPHY Carbon Steel Pipe Fittings size | ASTM A860 WPHY Seamless Butt Weld Fittings : 1/2" - 10" ASTM A860 WPHY Welded Butt Weld Fittings : 1/2" - 48" |
| CS WPHY Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| ASTM A860 WPHY Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| ASTM A860 WPHY Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM A860 WPHY Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A860 Gr WPHY Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A860 WPHY Buttweld Fitting |
| ASTM A860 WPHY Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| ASTM A860 WPHY Carbon Steel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 860 WPHY Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | CS 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
CS ASTM A860 Cross
CS ASTM A860 45 Deg Elbow
CS ASTM A860 Concentric Reducer
CS ASTM A860 Eccentric Reducer
CS ASTM A860 Pipe Cap
CS ASTM A860 90 Deg Elbow
CS ASTM A860 Lateral Tee
CS ASTM A860 Unequal Tee
CS ASTM A860 Stub End
CS ASTM A860 Tee
CS ASTM A860 Pipe Nipples
CS ASTM A860 Pipe Bends
ASTM A860 WPHY Carbon Steel Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASTM A860 WPHY Carbon Steel Pipe Fittings Forms & Availability
| Products | Size | |
|---|---|---|
| ASTM A860 WPHY Carbon Steel Elbow – Long Radius | ASTM A860 WPHY Carbon Steel Stub Ends | Sizes 1/2″ – 48″ |
| ASTM A860 WPHY Carbon Steel Elbow – Short Radius | ASTM A860 WPHY Carbon Steel Cross | |
| ASTM A860 WPHY CS 3D Elbow | ASTM A860 WPHY Carbon Steel 5D Elbow | |
| ASTM A860 WPHY Carbon Steel Reducing Elbow | ASTM A860 WPHY Carbon Steel Reducing Cross | |
| ASTM A860 WPHY CS 45° Elbow | ASTM A860 WPHY CS Tees | |
| ASTM A860 WPHY Carbon Steel Fabricated Tee | ASTM A860 WPHY CS End Cap | |
| ASTM A860 WPHY CS Reducer | ASTM A860 WPHY CS Coupling | |
| ASTM A860 WPHY Carbon Steel Concentric Reducer | ASTM A860 WPHY Carbon Steel Eccentric Reducer | |
| ASTM A860 WPHY Carbon Steel Pipe Nipple | ASTM A860 WPHY Carbon Steel Welded Pipe Fittings | |
ASTM A860 WPHY Carbon Steel Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-234 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Steel butt-welding fittings |
| MSS SP-43 | Wrought Carbon Steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Russian Steel Pipe Fittings Standard | |
| Gost17375 | Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design |
| Gost17376 | Carbon and low-alloy steel butt-welding fittings.Tees. Design |
| Gost30753 | Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design |
| Gost17378 | Carbon and low-alloy steel butt-weldings. Reducers. Design |
| Gost17379 | Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design |
| Gost17380 | Carbon and low-alloy steel butt-weldings fittings. General specifications |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM A860 WPHY Carbon Steel Pipe Fittings
| ASME B16.9 ASTM A860 WPHY Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of ASTM A860 Carbon Steel Pipe Fittings
- CS ASTM A860 Pipe Fitting
- ASTM A860 Buttweld Fitting
- Carbon Steel A860 Seamless Fitting
- MSS-SP-43 90 Elbow
- Carbon Steel ASTM A860 45 Elbow
- CS ASTM A860 Short Radius Elbow
- ASME SA860 CS Eccentric Reducer
- Carbon Steel ASTM A860 Equal Tee
- CS ASTM A860 Unequal Tee
- Carbon Steel ASTM A860 Lateral Tee
- ASTM A860 U Bend
- Carbon Steel A860 Pipe Bends
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.