Incoloy 825 Pipe Fittings
Incoloy 825 10d Pipe Bend, Incoloy Alloy 825 End Cap, ASTM B366 Alloy 825 Pipe Fittings, ASTM B366 Incoloy Alloy 825 Pipe bend, ASTM B366 Inconel 5d Bend, 825 Incoloy End Cap, Incoloy 825 Pipe Cap, 825 Incoloy End Cap Suppliers in Mumbai,India.
Incoloy 825 Pipe Fittings
Incoloy UNS N08825 Pipe Fittings
Victor Steel is anacknowledged trader and seller of Incoloy Alloy 825 Pipe Fittings, which noticeably ductile throughout an extensive temperature range. Combined with appropriate weldability, make this product exceptionally fabricable. Incoloy UNS N08825 End Cap Pipe Fittings has outstanding corrosion resistance to distilled waters. Resistance to mineral acids on this product varies in step with temperature and awareness and whether or not the solution is aerated or not. This product can hot worked with heavy forming done at temperatures above 871 Degree C (1600 Degree F). The decrease carbon content material of this product makes the material immune to graphitization and consequently much less situation to embrittlement. As it has excessive electric, this product is consequently has excessive thermal conductivity.
Incoloy WNR 2.4858 Dish Cap Pipe Fittings is ferromagnetic and so is softer and "gummy" however may be with no trouble machined via way of means of traditional mean. This steel has low corrosion rates in impartial and distilled water. This steel are utilized in aerospace, petrochemical and chemical processing. This steel is frequently utilized in alkalis and impartial salt solutions and towards natural acids. This steel is resistance to mineral acids varies in step with temperature and awareness and whether or not the solution is aerated or not. Those attributes, mixed with appropriate weldability, make this steel exceptionally fabricatable. This steel is resistance to impartial and alkaline salt solutions. This steel may be hot fashioned in a nearly limitless wide variety of shapes. Nickel Alloy 825 Reducer Pipe Fittings is likewise used for Food processing and Synthetic fibre processing. Pressure vessels and vessel additives may be created from this steel, which is likewise utilized in Caustic evaporators and Combustion boats. This steel is a commercially natural nickel that famous appropriate corrosion resistance and has as a substitute low electric resistivity. This steel has appropriate mechanical properties and outstanding resistance to many corrosive environments. This product unearths its applications within the coping with of foods, artificial fibers and caustic alkalis. The applications for this product have prolonged into electric and electronic applications inclusive of excessive strength radio valves and infrared emitters in vacuum.
Incoloy UNS N08825 Seamless Pipe Fittings, ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, Incoloy WERKSTOFF NR. 2.4858 Cross, ANSI B16.9 Incoloy 825 Welded Buttweld Fittings, ASTM B366 825 Incoloy 90 degree Elbow Manufacturer in Mumbai,India.
Incoloy 825 Pipe Fittings Specification
| 825 Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
|---|---|
| 825 Incoloy Alloy Pipe Fittings size | 825 Seamless Butt Weld Fittings : 1/2" - 10" 825 Welded Butt Weld Fittings : 1/2" - 48" |
| Alloy 825 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Incoloy 825 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 825 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM B366 825 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 825 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 825 Buttweld Fitting |
| ASTM B366 825 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 825 Incoloy Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 366 825 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | Alloy UNS N08825, N08825 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Incoloy 825 Cross
Incoloy 825 Pipe Bend
Incoloy 825 Pipe Collar
Incoloy 825 Lateral Tee
Incoloy 825 90 Deg Elbow
Incoloy 825 Stub End
Incoloy 825 Tee
Incoloy 825 45 deg Elbow
Incoloy 825 Concentric Reducer
Incoloy 825 Eccentric Reducer
Incoloy 825 Pipe Cap
Incoloy 825 Pipe Nipples
Incoloy 825 Pipe Fittings Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| Incoloy 825 | 0.05 max | 1.00 max | 0.05 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 825 Pipe Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
ASTM B366 Incoloy 825 Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASTM B366 Incoloy 825 Pipe Fittings Forms & Availability
| Products | Size | |
|---|---|---|
| ASTM B366 825 Incoloy Alloy Elbow – Long Radius | ASTM B366 825 Incoloy Alloy Stub Ends | Sizes 1/2″ – 48″ |
| ASTM B366 825 Incoloy Alloy Elbow – Short Radius | ASTM B366 825 Incoloy Cross | |
| ASTM B366 825 Alloy 3D Elbow | ASTM B366 825 Incoloy Alloy 5D Elbow | |
| ASTM B366 825 Incoloy Alloy Reducing Elbow | ASTM B366 825 Incoloy Alloy Reducing Cross | |
| ASTM B366 825 Alloy 45° Elbow | ASTM B366 825 Alloy Tees | |
| ASTM B366 825 Incoloy Alloy Fabricated Tee | ASTM B366 825 Alloy End Cap | |
| ASTM B366 825 Alloy Reducer | ASTM B366 825 Alloy Coupling | |
| ASTM B366 825 Incoloy Alloy Concentric Reducer | ASTM B366 825 Incoloy Alloy Eccentric Reducer | |
| ASTM B366 825 Incoloy Alloy Pipe Nipple | ASTM B366 825 Incoloy Alloy Welded Pipe Fittings | |
Incoloy 825 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Incoloy 825 Pipe Fittings
| ASME B16.9 ASTM B366 825 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Incoloy 825 Pipe Fittings
- 825 Incoloy® Alloy Seamless Reducing Tee
- 825 Nickel Alloy Seamless Fittings
- Incoloy 825 1D Elbow/3D Elbow/5D Elbow
- Incoloy 825 Weldable 1.5D Elbow
- 825 Incoloy Alloy Two Halve Butt weld Fittings
- Incoloy 2.4858 Stub End Exporter
- 1 Inch Incoloy 825 Buttweld Pipe Fittings
- 6 Inch Incoloy Alloy 825 Buttweld Pipe Fittings
- 825 Incoloy Buttweld Reducing Nipple
- Incoloy Alloy 825 Seamless Buttweld Fittings
- Sch 80 Incoloy 825 Pipe Fittings
- ASTM B366 Incoloy 825 Eccentric Reducer
- ASME B16.9 Incoloy NiCr21Mo 10D Elbow
- NiCr21Mo Incoloy® Alloy Two Joint Pipe Fittings
- 825 Incoloy LR Elbow Supplier
- Alloy 825 Wrought Austenitic 45 Degree Elbow
- ASTM B366 825 Welded Pipe Fittings
- NiCr21Mo Incoloy Alloy 90° Seamless Elbow Dealer
- Incoloy 825 Pipe Fittings Stockist
- Incoloy 825 Pipe Fittings Supplier in Mumbai
- Alloy 825 Butt weld Pipe Fittings Manufacturer
- Incoloy 2.4858 Pipe Fittings Dimensions
- Incoloy NA 16 Buttweld Reducing Nipple
- Wrought Austenitic Incoloy 825 Pipe Fittings
- ASTM B366 825 Eccentric Reducer at Best Price
- Alloy NiCr21Mo Equal Cross Supplier
- Suppliers of 825 Nickel Alloy End Pipe Cap
- Incoloy 825 90° LR Elbow
- 825 Incoloy Seamless Pipe Fittings
- Incoloy 825 90° Weldable SR Elbow
- Alloy UNS N08825 Pipe Reducers
- ASME B16.9 Incoloy 825 90° Reducing Elbow
- 825 Nickel Alloy Welded Pipe Fittings
- MSS SP-43 Incoloy 825 Stub End
- ASTM B366 825 Incoloy Caps
- Incoloy NA 16 Pipe Fittings Supplier
- B366 825 Two Joint Pipe Fittings
- ASTM B366 Incoloy 825 Reducing Tee
- ASTM B366 825 Lateral Tee Supplier
- Sch 10 Incoloy 825 Concentric Reducer
- Incoloy® Alloy 825 Welded Pipe Fittings Dealer
- Sch 80 Nickel Alloy 825 Eccentric Reducer
- B366 Grade 825 Industrial Buttweld Pipe Fittings
- ANSI B16.9 Incoloy 825 Pipe Cap
- UNS N08825 Incoloy Weldable 3D Elbow
- 825 Incoloy 180° Buttweld Elbow
- Alloy 825 Lap Joint Stub Ends Stockists
- ASTM B366 Gr 825 45° Long Radius Elbow
- Incoloy 2.4858 Incoloy Alloy Short Radius Elbow Exporter
- B366 Grade 825 Pipe Bends
- ASTM B366 825 Incoloy Pipe Elbow
- 825 Incoloy 180° LR Return Bend
- ASME B16.9 Incoloy 825 90° Reducing Elbow
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.