Incoloy 925 Pipe Fittings
Incoloy 925 Pipe Fittings, Alloy ANSI B16.9 Short & Long Radius Elbow, UNS N09925 Reducing Tee, 925 Incoloy Unequal Cross, Inconel 925 10d Pipe Bend, UNS N09925 Seamless Pipe Fittings Manufacturer in Mumbai,India.
Incoloy 925 Pipe Fittings
Incoloy UNS N09925 Pipe Fittings
Victor Steel is anacknowledged trader and stockist of Incoloy Alloy 925 Pipe Fittings, which has an incredibly low work-hardening rate. This product is regularly utilized in approaches the use of caustic alkaline and food processing. Long-time exposures within the 800 Degree F to 1200 Degree F variety of this product bring about precipitation of a carbon containing segment and lack of ductility. Incoloy UNS N09925 Elbow Pipe Fittings is beneficial for applications in which keeping product purity is taken into consideration inclusive of coping with of caustic alkalis, artificial fibers and foods. This product has an incredibly low work-hardening rate. This product has resistance to impartial and alkaline salt solutions. Corrosion resistance of this product is higher in de-aerated acid.
Annealing of this product is carried out at temperature among 704 Degree C (1300 Degree F) and 871 Degree C (1600 Degree F). This product gives corrosion resistance in lowering and impartial media. Incoloy WNR 2.4852 45-Degree Elbow Pipe Fittings has proper weldability and solderability, and so has low vapour stress and low gas content material. These properties and its chemical composition make this product fabricatable and noticeably immune to corrosive environments.This steel has low hardness, proper ductility and proper weldability, making the steel clean to fabricate. Because it incorporates magnetic and mechanical properties, this steel may be utilized in gadgets that require magnetic actuated components. Nickel Alloy 92590-Degree Elbow Pipe Fittings is without difficulty formed with the aid of using traditional methods. This steel may be hot formed to any form and formed cold with the aid of using all methods. This steel is utilized in food processing, alongside marine and water remedy applications. This steel is regularly utilized in tanks wherein fluorine is produced and in which it reacts with hydrocarbon (CFC) because of the material’s resistance towards fluorine. Corrosion resistance on this steel is higher in de-aerated acid. This steel has terrific resistance to dry fluorine. This steel is cold rolled below right conditions. And so the tensile strength and elongation on this steel drop considerably at temperatures above 315 Degree C (six hundred Degree F).
ASTM B366 Incoloy 925 Pipe Elbow, Incoloy 925 45 Deg/90 Degree/180 Deg Elbow, Incoloy 925 Cross, Incoloy 925 5d Pipe Bend, ASME SB366 Incoloy 925 Long Stub, Inconel 925 Equal Tee Suppliers in Mumbai,India.
Incoloy 925 Pipe Fittings Specification
| 925 Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
|---|---|
| 925 Incoloy Alloy Pipe Fittings size | 925 Seamless Butt Weld Fittings : 1/2" - 10" 925 Welded Butt Weld Fittings : 1/2" - 48" |
| Alloy 925 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Incoloy 925 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| 925 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM B366 925 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 925 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 925 Buttweld Fitting |
| ASTM B366 925 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 925 Incoloy Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 366 925 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | Alloy UNS N09925 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Incoloy 925 Cross
Incoloy 925 Pipe Bend
Incoloy 925 Pipe Collar
Incoloy 925 Lateral Tee
Incoloy 925 90 Deg Elbow
Incoloy 925 Stub End
Incoloy 925 Tee
Incoloy 925 45 deg Elbow
Incoloy 925 Concentric Reducer
Incoloy 925 Eccentric Reducer
Incoloy 925 Pipe Cap
Incoloy 925 Pipe Nipples
Incoloy 825 Pipe Fittings Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS |
| Incoloy 925 | – | N09925 | NCF 925 |
Incoloy 825 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 925 | 0.03 max | 1.00 max | 0.05 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 42.00 – 46.00 | 19.55 – 22.50 | 0.01-0.05 max | – |
Incoloy 825 Pipe Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
ASTM B366 Incoloy 925 Pipe Fittings Dimensions Standard
| Nominal Pipe Size |
Outside Diameter |
Caps | Straight Tees | Straight Crosses | Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inches) | (mm) | (inches) | Length (inches) |
Center to End (inches) |
Center to End (inches) |
Lap Diameter (inches) |
Long Length (inches) |
Short Length (inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
ASTM B366 Incoloy 925 Pipe Fittings Forms & Availability
| Products | Size | |
|---|---|---|
| ASTM B366 925 Incoloy Alloy Elbow – Long Radius | ASTM B366 925 Incoloy Alloy Stub Ends | Sizes 1/2″ – 48″ |
| ASTM B366 925 Incoloy Alloy Elbow – Short Radius | ASTM B366 925 Incoloy Cross | |
| ASTM B366 925 Alloy 3D Elbow | ASTM B366 925 Incoloy Alloy 5D Elbow | |
| ASTM B366 925 Incoloy Alloy Reducing Elbow | ASTM B366 925 Incoloy Alloy Reducing Cross | |
| ASTM B366 925 Alloy 45° Elbow | ASTM B366 925 Alloy Tees | |
| ASTM B366 925 Incoloy Alloy Fabricated Tee | ASTM B366 925 Alloy End Cap | |
| ASTM B366 925 Alloy Reducer | ASTM B366 925 Alloy Coupling | |
| ASTM B366 925 Incoloy Alloy Concentric Reducer | ASTM B366 925 Incoloy Alloy Eccentric Reducer | |
| ASTM B366 925 Incoloy Alloy Pipe Nipple | ASTM B366 925 Incoloy Alloy Welded Pipe Fittings | |
Incoloy 925 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Incoloy 925 Pipe Fittings
| ASME B16.9 ASTM B366 825 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Incoloy 925 Pipe Fittings
- 925 Incoloy® Alloy Seamless Reducing Tee
- 925 Nickel Alloy Seamless Fittings
- Incoloy 925 1D Elbow/3D Elbow/5D Elbow
- Incoloy 925 Weldable 1.5D Elbow
- 925 Incoloy Alloy Two Halve Butt weld Fittings
- Incoloy NCF 925 Stub End Exporter
- 1 Inch Incoloy 925 Buttweld Pipe Fittings
- 6 Inch Incoloy Alloy 925 Buttweld Pipe Fittings
- 925 Incoloy Buttweld Reducing Nipple
- Incoloy Alloy 925 Seamless Buttweld Fittings
- Sch 80 Incoloy 925 Pipe Fittings
- ASTM B366 Incoloy 925 Eccentric Reducer
- ASME B16.9 Incoloy 925 10D Elbow
- 925 Incoloy® Alloy Two Joint Pipe Fittings
- 925 Incoloy LR Elbow Supplier
- Alloy 925 Wrought Austenitic 45 Degree Elbow
- ASTM B366 925 Welded Pipe Fittings
- 925 Incoloy Alloy 90° Seamless Elbow Dealer
- Incoloy 925 Pipe Fittings Stockist
- Incoloy 925 Pipe Fittings Supplier in Mumbai
- Alloy 925 Butt weld Pipe Fittings Manufacturer
- Incoloy NCF 925 Pipe Fittings Dimensions
- Incoloy NCF 925 Buttweld Reducing Nipple
- Wrought Austenitic Incoloy 925 Pipe Fittings
- ASTM B366 925 Eccentric Reducer at Best Price
- Alloy 925 Equal Cross Supplier
- Suppliers of 925 Nickel Alloy End Pipe Cap
- Incoloy 925 90° LR Elbow
- 925 Incoloy Seamless Pipe Fittings
- Incoloy 925 90° Weldable SR Elbow
- Alloy UNS N09925 Pipe Reducers
- ASME B16.9 Incoloy 925 90° Reducing Elbow
- 925 Nickel Alloy Welded Pipe Fittings
- MSS SP-43 Incoloy 925 Stub End
- ASTM B366 925 Incoloy Caps
- Incoloy NCF 925 Pipe Fittings Supplier
- B366 925 Two Joint Pipe Fittings
- ASTM B366 Incoloy 925 Reducing Tee
- ASTM B366 925 Lateral Tee Supplier
- Sch 10 Incoloy 925 Concentric Reducer
- Incoloy® Alloy 925 Welded Pipe Fittings Dealer
- Sch 80 Nickel Alloy 925 Eccentric Reducer
- B366 Grade 925 Industrial Buttweld Pipe Fittings
- ANSI B16.9 Incoloy 925 Pipe Cap
- UNS N09925 Incoloy Weldable 3D Elbow
- 925 Incoloy 180° Buttweld Elbow
- Alloy 925 Lap Joint Stub Ends Stockists
- ASTM B366 Gr 925 45° Long Radius Elbow
- Incoloy NCF 925 Incoloy Alloy Short Radius Elbow Exporter
- B366 Grade 925 Pipe Bends
- ASTM B366 925 Incoloy Pipe Elbow
- 925 Incoloy 180° LR Return Bend
- ASME B16.9 Incoloy 925 90° Reducing Elbow
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.