Inconel 625 Pipe Fittings, Alloy 625 Buttweld Elbow, ASTM B366 Inconel 625 Concentric Reducer, 625 Inconel Eccentric Reducer Manufacturer, Suppliers

Inconel 625 Pipe Fittings

Inconel 625 Pipe Fittings, Alloy 625 Short Radius Elbow Supplier, ASTM B366 Inconel Alloy 625 Welded Buttweld Fittings, Inconel UNS N06625 1.5d Pipe Bend Manufacturer in Mumbai,India.

Inconel 625 Pipe Fittings

Victor Steel is anacknowledged trader and supplier of Inconel Alloy 625 Pipe Fittings, which carry out fine in lowering environments and is therefore used for chemical corrosion resistance in caustic solutions. This steel is exceptionally immune to corrosion via way of means of impartial and alkaline salt solutions, fluorine and chlorine. This steel also can be used below oxidizing situations while a passive oxide film is fashioned. Inconel UNS N06625 Equal Tee Pipe Fittings is frequently utilized in food production inclusive of coping with of cooling brine, fruit juices and fatty acids because of the material’s resistance towards acids. This steel is immune to all dry gases at room temperature and in dry chlorine and hydrogen chloride can be utilized in temperatures as much as 550 Degree C. This steel has a low hardness and appropriate ductility and malleability.

Inconel WNR 2.4856 Unequal Tee Pipe Fittings is as properly used for lead in wires for heating elements, and battery connections / terminals. Heat remedy of this steel is generally executed on the temperature variety from 760 Degree C to 1050 Degree C accompanied via way of means of being quenched in water or rapidly cooled via way of means of different means. This product has appropriate mechanical properties and outstanding resistance to many corrosive environments. This product is extraordinarily resistance to caustic alkalis as much as an inclusive of the molten state. This steel has outstanding corrosion resistance to distilled and herbal waters. Nickel Alloy 625 Lateral Tee Pipe Fittings offers corrosion resistance in impartial to reasonably lowering environments. This product is restrained to provider at temperatures under 315 Degree C. The corrosion resistance of this product makes it especially beneficial for keeping product purity. This product has excessive electric and thermal conductivity. This product is embrittled via way of means of inter-granular precipitates at temperatures of six hundred Degree F to 1400 Degree F in lots of processes. This product has low gas content material and vapour pressure, at the side of excessive thermal and electric conductivities. It has outstanding resistance to maximum corrosive and caustic environments.

Inconel DIN 2.4856 Cross, Inconel Alloy 625 Pipe Elbow, ASME SB366 Nickel Alloy 625 90 degree Elbow, 625 Inconel 3d Pipe Bend Suppliers in Mumbai,India.

Inconel 625 Pipe Fittings Specification

Grade	Inconel Alloy 625 / UNS N06625
Standard	ASTM B366, ASME SB366
Dimensions	ASME B16.28, ASME/ANSI B16.9, MSS-SP-43
Inconel 625 Seamless Fittings	1/2" NB - 10" NB
Inconel 625 Welded Fittings	1/2" NB - 48" NB
Form	90 Elbow, 45 Elbow, Long Radius Elbow, Short Radius Elbow, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal Tee, Lateral Tee, Cross, Bends 1.5d, 3d, 5d, 10d, U bend, 180 Deg Bend, Short Stub End, Long stub end, End Cap, Dish Cap
Schedule	SCH 5 To SCH XXS
Wall Thickness	from 2 to 40 mm
Type	Seamless / Welded / Fabricated

Inconel 625 Pipe Fittings

Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Inconel 625	2.4856	N06625	NCF 625	NA 21	ХН75МБТЮ	NC22DNB4M	NiCr22Mo9Nb

Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr
Inconel 625	0.10max	0.50 max	0.50 max	0.015max	–	5.0 max	58.0 min	20.0 – 23.0

Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Inconel 625	8.4 g/cm3	1350 °C (2460 °F)	Psi – 1,35,000 , MPa – 930	Psi – 75,000 , MPa – 517	42.5 %