Incoloy 925 Round Bars
Incoloy 925 Square Bar, Incoloy Alloy 925 Flat Bar, Incoloy UNS N09925 Round Bar, ASTM B425 Nickel Alloy 925 Rods Manufacturer in India.
Victor Steel is a famous seller and exporter of Incoloy Alloy 925 Round Bars, which has resistance extended with molybdenum alloy content material. Incoloy UNS N09925 Flat Bars are utilized in Pulp and paper processing gadget, and Soap and photographic coping with gadget. They are utilized in corrosion resistant electric enclosures, wheel covers, car moulding and trim, kitchen gadget, hose clamps, etc. Typical applications of this steel are exhaust manifolds, bellows, heat exchangers, oil refinery gadget, pulp paper and fabric processing gadget, marine gadget, etc. It is certain to be used with excessive purity products in which product infection ought to be held to a minimum. Other foremost alloying factors on this alloy encompass manganese, silicon, and carbon, in which the rest of the chemical composition is more often than not iron.
Incoloy 925 Square Bars appreciably complements corrosion resistance, especially for extra saline or chloride-uncovered environments. They are durable, corrosion-resistant, and an awesome desire for excessive-strain situations. Post-weld annealing on this steel isn't always required whilst welding skinny sections. They are frequently utilized in business gadget (for example, in paper mills, chemical plants, water remedy). They also are utilized in garage tanks and tankers for chemical compounds and food products (for example, chemical tankers and street tankers). They are as properly utilized in food education gadget, especially in chloride environments. The extended degrees of chromium, nickel and molybdenum over this steel enhance chloride pitting resistance and popular corrosion. Nickel Alloy 925 Threaded Bars need to be heated to 1149 Degree C – 1260 Degree C; however, it need to now no longer be heated under 927 Degree C. It is proof against sulphuric acid concentrations as much as five percentage at temperatures as excessive as forty nine Degree C. It has first-rate resistance in applications in which infection is favoured to be stored to a minimum. It gives stepped forward resistance relative in strongly corrosive environments containing sulphurous media, chlorides, and different halides. It is frequently used within the chemical processing and marine industries. Post-paintings annealing on this steel may be carried out to keep the corrosion resistance property.
Inconel 925 Hexagonal Bar, ASTM SB425 Alloy 925 Threaded Bar, Alloy 925 Black Bar, ASTM B425 Incoloy® Alloy 925 Hex Bar, Incoloy JIS NCF 925 Bright Bar Suppliers in India.
ASTM B425 Incoloy 925 Round Bars Specification
Incoloy 925 Bar Standard | ASTM B425, AMS 5513, AMS 5511, AMS 5647 |
---|---|
Incoloy 925 Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Incoloy 925 Round bar size | Diameter: 3-~800mm |
Incoloy 925 Hex Bar size | 2-100mm A/F |
Inconel Alloy 625 Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Incoloy 925 Square bar size | 4 to 100mm |
Alloy 625 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Alloy 625 Rectangular Bars Section | 3.0 to 12.0mm thickness |
Incoloy 925 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
ASTM B425 Type 625 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Inconel Alloy 625 Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Incoloy 925 Rectangular Size | 33 x 30mm to 295 x 1066mm |
625 Alloy Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
ASTM B425 Type 625 Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
JIS NCF 625 T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Rolled Incoloy 925 Flat Bars Condition | Hardened & tempered, annealed |
ASTM B425 Type 625 Cold Rolled Bar Technique | 625 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Inconel Alloy 625 Rod Processing | Bar cutting to 650mm |
625 Alloy Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our 625 Inconel Round bar conforms to NACE MR0175/ISO 15156 |
Incoloy 925 Round Bars
Incoloy 925 Flat Bars
Incoloy 925 Hexagone Bars
Incoloy 925 Threaded Rods
Incoloy 925 Reinforcing Rods
Incoloy 925 Rebar
Incoloy 925 Hollow Bar
Incoloy 925 Round Edge Flat Bar
Incoloy 925 Square Bars
Incoloy 925 Rectangular Bar
Incoloy 925 Triangle Bar
Incoloy 925 Tig Bar
ASTM B425 Incoloy 925 Round Bars Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 925 | B425 925 | N09925 | NCF 925 | NCF 925 | ЭП703 | NCF 925 | NCF 925 | XH38BT |
Incoloy 925 Round Bars Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
925 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 925 Round Bars Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
925 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Processing Of Incoloy 925 Bars & Rods
Round bar Cutting | Products cut include Round bars, Flat bars, Hex bars, Square bars, Tubing and Hollow bars, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
Round bar Production Cutting | We can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
Round bar Polishing | Products polished included all tubular products, with OD & ID polishing available, Round bars, Square bars, Hex & Flat bars, Angles, Uneven Leg Angles, beams, and other shapes. |
ASTM B425 Incoloy 925 Bars & Rods Forms & Availability
Products | Size | |
ASTM B425 925 Inconel Alloy Rolled Bar | ASTM B425 925 Alloy Hot Rolled Bar | Sizes 3 - 800mm |
ASTM B425 925 Alloy Cold Rolled Bar | ASTM B425 925 Inconel Forged Bar | |
ASTM B425 925 Inconel Continuous Cast Bar | ASTM B425 925 Inconel Alloy Rods | |
ASTM B425 925 Inconel Alloy Annealed Bar | ASTM B425 925 Inconel Alloy Normalized Bar | |
ASTM B425 925 Inconel Quenched & Tempered Bar | ASTM B425 925 Inconel Alloy Hardened & Tempered Bar | |
ASTM B425 925 Inconel Alloy Black Bar | ASTM B425 925 Inconel Bright Bar | |
ASTM B425 925 Inconel Peeled Bar | ASTM B425 925 Inconel Alloy Grinded Machined Bar | |
ASTM B425 925 Inconel Alloy Shaft | ASTM B425 925 Inconel Alloy Polished Bar | |
ASTM B425 925 Inconel Alloy Cold Finish Round Bar | ASTM B425 925 Nickel Alloy Half Round Bar |
ASTM B425 Incoloy 925 Round Bars Standards
Standard | Description |
---|---|
ASTM B425 | Specification for Inconel Bars and Shapes |
ASTM A314 | Specification for Inconel Billets and Bars for Forging |
ASTM A493 | Specification for Inconel Wire and Wire Rods for Cold Heading and Cold Forging |
ASTM A564 | Specification for Hot-Rolled And Cold-Finished Age-Hardening Inconel Bars and Shapes |
ASTM A565 | Specification for Martensitic Inconel Bars, Forgings, and Forging Stock for High Temperature Service |
ASTM A582 | Specification for Free Machining Inconel Bars |
ASTM A666 | Specification For Annealed or Cold-Worked Inconel Flat Bar |
ASTM A484 | Standard specification general requirements for Inconel and heat-resisting bars, billets and forgings. |
ASTM A476 | Standard specification for Inconel and heat-resisting steel bars and shapes for used in boilers and other pressure vessels. |
Inconel UNS N09925 Round Bar Size Chart
Size & Dimensions of Incoloy 925 round bar | |||||||
---|---|---|---|---|---|---|---|
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.400 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.400 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Weight Chart Incoloy 925 Round Bar
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
---|---|---|---|---|---|---|---|---|
Round Bar | ||||||||
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3″ | 10.900 | 35.762 |
1/8″ | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4″ | 12.800 | 41.996 |
5/32″ | 0.029 | 0.095 | 7/8″ | 0.926 | 3.038 | 3-1/2″ | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4″ | 17.001 | 55.780 |
3/16″ | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4″ | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1″ | 1.210 | 3.970 | 4-1/4″ | 21.908 | 72.249 |
7/32″ | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2″ | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4″ | 27.366 | 90.249 |
1/4″ | 0.076 | 0.249 | 1-1/8″ | 1.534 | 5.033 | 5″ | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2″ | 36.690 | 121.000 |
5/16″ | 0.118 | 0.387 | 1-1/4″ | 1.924 | 6.349 | 6″ | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2″ | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8″ | 2.303 | 7.550 | 7″ | 59.432 | 196.000 |
3/8″ | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2″ | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8″ | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10″ | 121.048 | 397.140 |
7/16″ | 0.232 | 0.761 | 1-1/2″ | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2″ | 0.303 | 0.994 | 1-5/8″ | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4″ | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16″ | 0.383 | 1.256 | 1-7/8″ | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8″ | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2″ | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8″ | 5.475 | 17.963 | |||
11/16″ | 0.573 | 1.880 | 2-1/4″ | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4″ | 0.682 | 2.237 | 2-3/8″ | 6.838 | 22.435 | |||
2-1/2″ | 7.576 | 24.856 | ||||||
2-5/8″ | 8.354 | 27.409 | ||||||
2-3/4″ | 9.169 | 30.083 | ||||||
Other Types of Incoloy 925 Round Bars & Rods
- 925 Inconel Hexagonal Rods
- Inconel NCF 925 Threaded Bars Supplier
- Inconel Alloy 925 Hexagonal Bar
- 925 Alloy Hollow Bar
- Nickel Alloy 925 Square Bar
- Inconel UNS N09925 Round Bar
- Inconel® Alloy 925 Hardened & Tempered Bar
- ASME SB166 Grade 925 Grinded Machined Bar
- Nickel Alloy 925 T-Bar
- Inconel EN NCF 925 Hollow Ring Bars
- Alloy 925 Continuous Cast Bar
- Incoloy GOST ЭП703 Large Diameter Bars Exporter