Monel Alloy 400 Round Bars
Alloy 400 Bright Bar, Monel UNS N04400 Square Bar, Monel Alloy 400 Hexagonal Bar, Monel EN NiCu30Fe Black Bar Suppliers in India.
Victor Steel is a famous stockist and supplier of Monel Alloy 400 Round Bars, which has great resistance to a huge variety of atmospheric environments and plenty of corrosive media.Having a precise nice control system, we're seemed because the noteworthy manufacturer, dealer and dealer of an in depth gamut of Monel UNS N04400 Hollow Bars, that is synthetic utilising first-class nice alloy material and superior era. By doing away with connector bolts and loosening the fourth, the frame of this alloy may be swung away thru the fourth bolt because the fulcrum. We are thrilled to give a huge spectrum of this product, which might be painstakingly evolved via way of means of our groups of adept expert and synthetic in our kingdom of the artwork centers from the best grades of metallic alloys.
Monel WNR 2.4360 Hexagonal Bars has functions like Reliable overall performance, Dimensional accuracy, Sturdiness, and more. Our provided alloy is synthetic at our stop the use of top rate nice material and modern-day era beneath the steerage of professional professionals. It has Excellent nice, Quality product, High overall performance, Long life, Fine nice, Everlasting finish, and more. This steel containing considerable quantities of magnesium whilst provided in strain-hardened tempers are normally given a very last elevated-temperature remedy referred to as stabilizing to make sure balance of properties. Moreover, a group of our nice examiners conducts a sequence of nice tests on this Nickel Alloy 400 Triangular Bars to be searching for out any viable fault. This enables to perform any set up or upkeep characteristic on this steel and decreases downtime. In view of the numerous necessities of our esteemed customers we provide these steel in plethora of dimensions and specs. They are prudently made via way of means of the use of most suitable nice materials in unique dimensions to make sure leak evidence conveying of drinks and gases. It has Long time period Corrosion resistance, Excellent effect resistance and bendability adhesion, Excellent Prevention to salt damage, Excellent Bond Strength with concrete, etc.
ASTM B164 Monel 400 Hex Bar, Monel® Alloy 400 Cold Drawn Round Bar, Nickel Alloy 400 Forged Bars, Monel DIN 2.4360 Threaded Bar Manufacturer in India.
ASTM B164 Monel Alloy 400 Round Bars Specification
Monel 400 Bar Standard | ASTM B164, ASTM B865, AMS 5513, AMS 5511, AMS 5647 |
---|---|
Monel 400 Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Monel 400 Round bar size | Diameter: 3-~800mm |
Monel 400 Hex Bar size | 2-100mm A/F |
Monel Alloy 400 Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Monel 400 Square bar size | 4 to 100mm |
Alloy 400 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Alloy 400 Rectangular Bars Section | 3.0 to 12.0mm thickness |
Monel 400 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
ASTM B164 Type 400 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Monel Alloy 400 Threaded Bar Billet Size | 1/2 to 495mm Diameter |
Monel 400 Rectangular Size | 33 x 30mm to 295 x 1066mm |
400 Alloy Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
ASTM B164 Type 400 Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
JIS NW 400 T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Rolled Monel 400 Flat Bars Condition | Hardened & tempered, annealed |
ASTM B164 Type 400 Cold Rolled Bar Technique | 400 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Monel Alloy 400 Rod Processing | Bar cutting to 650mm |
400 Alloy Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Our 400 Monel Round bar conforms to NACE MR0175/ISO 15156 |
Monel Alloy 400 Round Bars
Monel Alloy 400 Flat Bars
Monel Alloy 400 Hexagone Bars
Monel Alloy 400 Threaded Rods
Monel Alloy 400 Reinforcing Rods
Monel Alloy 400 Rebar
Monel Alloy 400 Hollow Bar
Monel Alloy 400 Round Edge Flat Bar
Monel Alloy 400 Square Bars
Monel Alloy 400 Rectangular Bar
Monel Alloy 400 Triangle Bar
Monel Alloy 400 Tig Bar
ASTM B164 Alloy 400 Round Bars Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel Alloy 400 Round Bars Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel Alloy 400 Round Bars Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Processing Of Monel Alloy 400 Bars & Rods
Round bar Cutting | Products cut include Round bars, Flat bars, Hex bars, Square bars, Tubing and Hollow bars, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter |
Round bar Production Cutting | We can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
Round bar Polishing | Products polished included all tubular products, with OD & ID polishing available, Round bars, Square bars, Hex & Flat bars, Angles, Uneven Leg Angles, beams, and other shapes. |
ASTM B164 Monel 400 Round Bars Standards
Standard | Description |
---|---|
ASTM B164 | Specification for Monel Bars and Shapes |
ASTM A314 | Specification for Monel Billets and Bars for Forging |
ASTM A493 | Specification for Monel Wire and Wire Rods for Cold Heading and Cold Forging |
ASTM A564 | Specification for Hot-Rolled And Cold-Finished Age-Hardening Monel Bars and Shapes |
ASTM A565 | Specification for Martensitic Monel Bars, Forgings, and Forging Stock for High Temperature Service |
ASTM A582 | Specification for Free Machining Monel Bars |
ASTM A666 | Specification For Annealed or Cold-Worked Monel Flat Bar |
ASTM A484 | Standard specification general requirements for Monel and heat-resisting bars, billets and forgings. |
ASTM A476 | Standard specification for Monel and heat-resisting steel bars and shapes for used in boilers and other pressure vessels. |
Monel Alloy UNS N04400 Round Bar Size Chart
Size & Dimensions of Monel 400 round bar | |||||||
---|---|---|---|---|---|---|---|
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.400 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.400 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Weight Chart Monel Alloy 400 Round Bar
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
---|---|---|---|---|---|---|---|---|
Round Bar | ||||||||
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3″ | 10.900 | 35.762 |
1/8″ | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4″ | 12.800 | 41.996 |
5/32″ | 0.029 | 0.095 | 7/8″ | 0.926 | 3.038 | 3-1/2″ | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4″ | 17.001 | 55.780 |
3/16″ | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4″ | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1″ | 1.210 | 3.970 | 4-1/4″ | 21.908 | 72.249 |
7/32″ | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2″ | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4″ | 27.366 | 90.249 |
1/4″ | 0.076 | 0.249 | 1-1/8″ | 1.534 | 5.033 | 5″ | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2″ | 36.690 | 121.000 |
5/16″ | 0.118 | 0.387 | 1-1/4″ | 1.924 | 6.349 | 6″ | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2″ | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8″ | 2.303 | 7.550 | 7″ | 59.432 | 196.000 |
3/8″ | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2″ | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8″ | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10″ | 121.048 | 397.140 |
7/16″ | 0.232 | 0.761 | 1-1/2″ | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2″ | 0.303 | 0.994 | 1-5/8″ | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4″ | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16″ | 0.383 | 1.256 | 1-7/8″ | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8″ | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2″ | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8″ | 5.475 | 17.963 | |||
11/16″ | 0.573 | 1.880 | 2-1/4″ | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4″ | 0.682 | 2.237 | 2-3/8″ | 6.838 | 22.435 | |||
2-1/2″ | 7.576 | 24.856 | ||||||
2-5/8″ | 8.354 | 27.409 | ||||||
2-3/4″ | 9.169 | 30.083 | ||||||
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Monel UNS N04400 Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Alloy 400 Cold Drawn and Ground Bar | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
400 Monel Peeled and Polished Round Bar | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Monel Alloy 400 Peeled and Ground Bar | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Tolerance of Monel Alloy 400 Round Bar (BS 970-3)
Cold Drawn 400 Monel Alloy Round Bar Tolerance & Steel Hexagon, Flat Tolerance | ||
---|---|---|
Tolerances for Cold Drawn Monel 400 Round Bar | ||
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
Flat (Thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
Flat (Width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Square and Hexagon | ≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
Turned Monel 400 round bar Tolerances | |
---|---|
Monel 400 round bar Size, diameter | Permitted variation |
mm | mm |
≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
Other Types of Monel Alloy 400 Round Bars & Rods
- ASTM B164 400 Monel Alloy Polish Bars
- Monel DIN 2.4360 Rectangular Bar
- Monel Alloy 400 Round Bars
- Nickel Alloy 400 Hexagon Bars Dealers
- Monel GOST МНЖМц 28-2,5-1,5 Half-Round Bars
- Alloy N04400 Hot Rolled Bar
- Monel® Alloy 400 Hexagonal Bar
- Monel 400 EN NiCu30Fe Square Bar
- Monel UNS N04400 Round Bar
- ASME SB164 Grade 400 Monel Grinded Machined Bar
- Nickel Alloy 400 Hex Bar
- Monel NW 4400 Flat Bar Supplier