Incoloy 825 Bright Bar, Inconel 825 Hex Bar, Incoloy Alloy 825 Bars, Incoloy UNS N08825 Round Bar, B425 Inconel Alloy 825 Square Bar Manufacturer, Suppliers

Incoloy 825 Round Bars

Incoloy 825 Rods, ASTM B425 Nickel Alloy 825 Round Bars, Incoloy Alloy 825 Square Bar, Incoloy DIN 2.4858 Threaded Bar Manufacturer in India.

ASTM B425 Incoloy 825 Round Bars

Inconel UNS N08825 Round Bars

Victor Steel is a famous seller and manufacturer of Incoloy Alloy 825 Round Bars, which has forming and welding properties at the side of deep drawing quality. However, this Incoloy UNS N08825 Hollow Bars takes its call from its ability to withstand rusting way to the interplay among its alloying additives and the surroundings to which they may be uncovered. It is a cost-effective and flexible corrosion resistant alloy appropriate for an extensive variety of popular purpose applications. The life of this alloy can be a reason of confusion — especially whilst the names & formulations are nearly the same. We provide this product in extraordinary length and shapes at a totally reasonable cost to our esteemed clients. It is frequently used for business furnaces; heat-treating gadget.

Incoloy WNR 2.4858 Hexagonal Bars combines first-rate excessive temperature properties with right ductility and weldability. Because of first-rate popular properties on this steel, an extensive variety of industries are used for some of extraordinary applications. The extra critically carburizing atmospheres of business heat treating furnaces require this alloy. Preheating isn't always essential for this steel, in which inter- temperature need to now no longer exceed one hundred fifty Degree C. As such, they may be used extensively within the heat remedy enterprise for furnace elements inclusive of conveyor belts. It is utilized in for oxidizing, nitriding, thermal biking and cementing applications to a few extents, albeit, the thoroughgoing carrier of excessive temperature need to be reduced. Nickel Alloy 825 Triangular Bars has oxidation resistance as much as 2000 Degree F and moderate strength at excessive temperature. It is frequently utilized in burners and combustion chambers, annealing covers, retorts, muffles, etc. It unearths extensive application in all excessive-temperature environments in which scaling and corrosion resistance are required. It commonly has first-rate strength at improved temperatures at the side of terrific resistance to creep deformation and environmental attack. Overall, it's far a first-rate desire for various applications starting from furnace additives to burner tips. Excellent resistance to oxidation below mildly cyclic situations thru 2000 Degree F characterizes this steel.

ASME SB425 Incoloy 825 Hex Bar, Incoloy UNS N08825 Bright Bar, Alloy 825 Black Bar, Incoloy® Alloy 825 Hexagonal Bar Suppliers in India.

ASTM B425 Incoloy 825 Round Bars Specification

Our 625 Inconel Round bar conforms to NACE MR0175/ISO 15156
Incoloy 825 Bar Standard	ASTM B425, AMS 5513, AMS 5511, AMS 5647
Incoloy 825 Bar Dimensions	EN, DIN, JIS, ASTM, BS, ASME, AISI
Incoloy 825 Round bar size	Diameter: 3-~800mm
Incoloy 825 Hex Bar size	2-100mm A/F
Inconel Alloy 625 Flat bar size	Thickness: 2 -100mm
Inconel Alloy 625 Flat bar size	Width: 10 to 500mm
Incoloy 825 Square bar size	4 to 100mm
Alloy 625 Angle bar size	3mm20mm20mm~12mm100mm100mm
Alloy 625 Rectangular Bars Section	3.0 to 12.0mm thickness
Incoloy 825 Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
ASTM B425 Type 625 Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Inconel Alloy 625 Threaded Bar Billet Size	1/2 to 495mm Diameter
Incoloy 825 Rectangular Size	33 x 30mm to 295 x 1066mm
625 Alloy Hex Bars Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
ASTM B425 Type 625 Hollow Bar Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
JIS NCF 625 T-Bar Surface	Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Rolled Incoloy 825 Flat Bars Condition	Hardened & tempered, annealed
ASTM B425 Type 625 Cold Rolled Bar Technique	625 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Inconel Alloy 625 Rod Processing	Bar cutting to 650mm
625 Alloy Rounds Bar Form	Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.

Incoloy 825 Round Bars

Incoloy 825 Flat Bars

Incoloy 825 Hexagone Bars

Incoloy 825 Threaded Rods

Incoloy 825 Reinforcing Rods

Incoloy 825 Rebar

Incoloy 825 Hollow Bar

Incoloy 825 Round Edge Flat Bar

Incoloy 825 Square Bars

Incoloy 825 Rectangular Bar

Incoloy 825 Triangle Bar

Incoloy 825 Tig Bar

ASTM B425 Incoloy 825 Round Bars Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN	OR
Incoloy 825	2.4858	N08825	NCF 825	NA 16	ЭП703	NFE30C20DUM	NiCr21Mo	XH38BT

Incoloy 825 Round Bars Chemical Composition

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr	Al	Ti
825	0.05 max	1.00 max	0.5 max	0.03 max	1.50 – 3.00	22.00 min	38.00 – 46.00	19.50 – 23.50	0.02 max	0.06 – 1.20

Incoloy 825 Round Bars Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
825	8.14 g/cm3	1400 °C (2550 °F)	Psi – 80,000 , MPa – 550	Psi – 32,000 , MPa – 220	30 %

Processing Of Incoloy 825 Bars & Rods

Round bar Cutting	Products cut include Round bars, Flat bars, Hex bars, Square bars, Tubing and Hollow bars, Pipe, Angles, channels, Beams and Tees. Thickness range is 1/16″ to 28″ diameter
Round bar Production Cutting	We can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances.
Round bar Polishing	Products polished included all tubular products, with OD & ID polishing available, Round bars, Square bars, Hex & Flat bars, Angles, Uneven Leg Angles, beams, and other shapes.

ASTM B425 Incoloy 825 Bars & Rods Forms & Availability

Products		Size
ASTM B425 825 Inconel Alloy Rolled Bar	ASTM B425 825 Alloy Hot Rolled Bar	Sizes 3 - 800mm
ASTM B425 825 Alloy Cold Rolled Bar	ASTM B425 825 Inconel Forged Bar
ASTM B425 825 Inconel Continuous Cast Bar	ASTM B425 825 Inconel Alloy Rods
ASTM B425 825 Inconel Alloy Annealed Bar	ASTM B425 825 Inconel Alloy Normalized Bar
ASTM B425 825 Inconel Quenched & Tempered Bar	ASTM B425 825 Inconel Alloy Hardened & Tempered Bar
ASTM B425 825 Inconel Alloy Black Bar	ASTM B425 825 Inconel Bright Bar
ASTM B425 825 Inconel Peeled Bar	ASTM B425 825 Inconel Alloy Grinded Machined Bar
ASTM B425 825 Inconel Alloy Shaft	ASTM B425 825 Inconel Alloy Polished Bar
ASTM B425 825 Inconel Alloy Cold Finish Round Bar	ASTM B425 825 Nickel Alloy Half Round Bar

ASTM B425 Incoloy 825 Round Bars Standards

Standard	Description
ASTM B425	Specification for Inconel Bars and Shapes
ASTM A314	Specification for Inconel Billets and Bars for Forging
ASTM A493	Specification for Inconel Wire and Wire Rods for Cold Heading and Cold Forging
ASTM A564	Specification for Hot-Rolled And Cold-Finished Age-Hardening Inconel Bars and Shapes
ASTM A565	Specification for Martensitic Inconel Bars, Forgings, and Forging Stock for High Temperature Service
ASTM A582	Specification for Free Machining Inconel Bars
ASTM A666	Specification For Annealed or Cold-Worked Inconel Flat Bar
ASTM A484	Standard specification general requirements for Inconel and heat-resisting bars, billets and forgings.
ASTM A476	Standard specification for Inconel and heat-resisting steel bars and shapes for used in boilers and other pressure vessels.

Inconel UNS N08825 Round Bar Size Chart

Size & Dimensions of Incoloy 825 round bar
Metric		US Bar		ASTM/ Canadian		Japanese
Bar Size	Diam. (mm)	Bar Size	Diam. (Inch)	Bar Size	Diam. (mm2)	Bar Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.400	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.400			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Weight Chart Incoloy 825 Round Bar

Size	Kgs / Foot	Kgs / Mtr	Size	Kgs / Foot	Kgs / Mtr	Size	Kgs / Foot	Kgs / Mtr
Round Bar
3mm	0.017	0.055	20mm	0.753	2.470	3″	10.900	35.762
1/8″	0.019	0.062	22mm	0.908	2.979	3-1/4″	12.800	41.996
5/32″	0.029	0.095	7/8″	0.926	3.038	3-1/2″	14.850	48.772
4mm	0.030	0.098	24mm	1.080	3.543	3-3/4″	17.001	55.780
3/16″	0.043	0.141	25mm	1.180	3.871	4″	19.306	63.340
5mm	0.047	0.154	1″	1.210	3.970	4-1/4″	21.908	72.249
7/32″	0.058	0.190	26mm	1.271	4.170	4-1/2″	24.4487	80.340
6mm	0.068	0.223	27mm	1.368	4.490	4-3/4″	27.366	90.249
1/4″	0.076	0.249	1-1/8″	1.534	5.033	5″	30.461	99.940
7mm	0.091	0.298	30mm	1.691	5.548	5-1/2″	36.690	121.000
5/16″	0.118	0.387	1-1/4″	1.924	6.349	6″	43.860	143.900
8mm	0.120	0.398	32mm	1.894	6.314	6-1/2″	51.093	167.630
9mm	0.152	0.498	1-3/8″	2.303	7.550	7″	59.432	196.000
3/8″	0.170	0.557	35mm	2.390	7.553	7-1/2″	68.226	225.000
10mm	0.189	0.620	36mm	2.438	7.999	8″	77.586	254.55
11mm	0.228	0.748	38mm	2.792	8.903	10″	121.048	397.140
7/16″	0.232	0.761	1-1/2″	2.715	8.951
12mm	0.271	0.889	40mm	3.009	9.872
1/2″	0.303	0.994	1-5/8″	3.200	10.449
13mm	0.318	1.043	1-3/4″	3.712	12.179
14mm	0.368	1.207	45mm	3.807	12.555
9/16″	0.383	1.256	1-7/8″	4.260	13.977
15mm	0.424	1.391	48mm	4.330	14.205
5/8″	0.473	1.551	50mm	4.698	15.414
16mm	0.481	1.578	2″	4.848	15.906
17mm	0.543	1.791	2-1/8″	5.475	17.963
11/16″	0.573	1.880	2-1/4″	6.135	20.128
18mm	0.610	2.001	60mm	6.768	22.205
3/4″	0.682	2.237	2-3/8″	6.838	22.435
			2-1/2″	7.576	24.856
			2-5/8″	8.354	27.409
			2-3/4″	9.169	30.083