Stainless Steel 347/347H Fasteners
Stainless Steel 347 Nuts, 347H Stainless Steel Screw, X6CrNiNb18-12 Stainless Steel Bolts, Stainless Steel 347 Fasteners, SS DIN 1.4550 Industrial Fasteners Manufacturer in Mumbai, India.
Victor Steel is a well-known exporter and distributor of Stainless Steel 347 / 347H Fasteners, which is often used for the fabrication of equipment. The low carbon content material of this Stainless Steel UNS S34700 Washers permits it to be welded devoid of inter-granular corrosion because of chromium carbide precipitation allowing it for use within the as-welded situation. This product ought to be heated to 1149 Degree C - 1260 Degree C (2100 Degree F - 2300 Degree F). Oxyacetylene welding approach isn't always favoured for this Stainless Steel WNR 1.4550 Screws. The brought molybdenum on this product significantly improves its resistance to pitting from chlorides. This product has top notch corrosion resistance in a huge variety of chemicals, specifically in acidic chloride environments.
In widespread, media that don't corrode this Alloy 347 Nuts will now no longer assault these molybdenum-containing grades. This product is non-magnetic within the annealed situation however might also additionally come to be barely magnetic after welding. This steel might also additionally be afflicted by uniform corrosion in robust mineral acids. Stainless Steel UNS S34709 Bolts is like wise an advanced grade to be used on heavy welded objects, which cannot be re-annealed. This steel must be water quenched and annealed to attain most hardness. Annealing on this steel might not be required after welding until pressure remedy is desired. Due to unique properties, this Stainless Steel WNR 1.4961 Machine Washers is utilized in a selection of application in lots of today’s vital industries. This steel is used for welding below situations which save you a post-weld annealing. This steel cannot be hardened via way of means of heat remedy, best via way of means of cold working. Alloy 347H Square Nuts has precise resistance to inter-granular corrosion within the as welded situation. This steel is regularly utilized in exhausts manifolds and chemical manufacturing equipment. A heat remedy of this steel after welding is usually now no longer usual. This steel is consequently a beneficial a material to be used round reactor plants.
Stainless Steel 347 Screw, SS UNS S34700 Nuts, Stainless Steel 347H Stud Bolts, X2CrNiMo18-15-4 Stainless 347H Steel Hexagon Nut Manufacturers & Suppliers in India.
Stainless Steel 347/347H Fasteners Specification
347/347H Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
---|---|
347/347H SS Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
SS 347/347H Fasteners Length | 3 mm to 200 mm |
SS 347/347H Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard of Stainless Steel 347/347H Fasteners | DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard SS 347 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 SS 347 Hex nuts |
Form of SS 347/347H Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of SS 347/347H Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of SS 347/347H Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
Packing of SS 347/347H Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating | Ptfe Coated Stainless Steel 347 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Stainless Steel 347/347H Fasteners finishing | Stainless steel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Stainless Steel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Stainless Steel 347/347H Nuts
Stainless Steel 347/347H Bolts
Stainless Steel 347/347H Screwes
Stainless Steel 347/347H Washers
Stainless Steel 347/347H Stud Bolts
Stainless Steel 347/347H Anchor Bolts
Stainless Steel 347/347H Taper pins
Stainless Steel 347/347H Dowel Pins
Stainless Steel 347/347H Socket Cap Screwe
Stainless Steel 347/347H Hex Coupling Nut
Stainless Steel 347/347H Threaded Hanger Bolt
Stainless Steel 347/347H Self Locking Nuts
Stainless Steel 347/347H Fasteners Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
SS 347H | 1.4961 | S34709 | SUS 347H | - | X6CrNiNb18-12 |
Stainless Steel 347/347H Fasteners Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 20.00 | 10xC – 1.10 | 9.00 - 13.00 | 62.74 min |
SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 8xC – 1.10 | 9.0 -13.0 | 63.72 min |
Stainless Steel 347/347H Fasteners Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
ASTM / DIN Specification of Stainless Steel 347/347H Fasteners
ASTM A193 | ASTM A194 | ASTM F2281 |
ASTM A193M | ASTM A194M | ASTM A962 |
ASTM A320 | ASTM F593-13a | ASTM A962M |
ASTM A320M | ASTM F594-15 | |
DIN 580 | DIN 6914 | DIN 6921 |
DIN 582 | DIN 3570 | DIN 603 |
DIN 444 | DIN 7990 | DIN 2510 |
DIN 939 | DIN 1B | DIN 976 |
DIN 933 | DIN 529 | DIN 912 |
DIN 931 | DIN 6325 |
Stainless Steel 347/347H Fasteners ANSI / ASME Standards
ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Stainless Steel 347/347H Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Other Types of Stainless Steel 347/347H Fasteners
- 347 Stainless Steel Construction Screws
- SUS 347H SS Thread Cutting Screw
- Stainless Steel 347 Countersunk Washer
- ASTM A193 SS 347H Tooth Lock Washer
- Stainless Steel X6CrNiNb18-10 Ogee Washer
- SS DIN 1.4961 Hex Washers
- SS UNS S34709 Allen Cap Screw Stockists
- 347 SS Particle Board Screw Exporter
- Stainless Steel 347H Concrete Screw
- 347H Stainless Steel Thread Rolling Screw
- ASTM F593 SS S34700 Customized Washer
- SS X6CrNiNb18-12 Hanger Bolt Supplier