Stainless Steel 310/310S Fasteners
Stainless Steel 310 Fasteners, X5CrNi18-10 Stainless Steel Bolts, UNS S31008 310S SS Nuts, 310S Stainless Steel Stud Bolts Manufacturer in Mumbai, India.
Victor Steel is a well-known exporter and supplier of Stainless Steel 310 / 310S Fasteners, which has mild strength at excessive temperature and so is non-magnetic within the annealed state. Stainless Steel UNS S31000 Screws has made this grade dominant within the manufacture of drawn stainless elements including hollow-ware, sinks, and saucepans. This steel is regularly utilized in food, dairy, brewery, and pharmaceutical manufacturing gadget. The chromium binds oxygen to the surface of this steel to guard the iron from oxidation (rust). Stainless Steel WNR 1.4841 Washers may be used within the welded situation in preference to the annealed situation. This steel has tremendous corrosion resistance in lots of environments and whilst in touch with extraordinary corrosive media. Common makes use of for this steel are observed within the food industry.
The low carbon on this Alloy 310 Nuts can be less complicated to form and form, which in flip might also have an effect on the ranges of residual strain left the steel after is forming and becoming up for welding. This steel is tremendous all through welding, and so can end up barely magnetic as an end result of cold working or welding. Stainless Steel UNS S31008 Bolts is utilized in boxes for hot focused acids, sulphur dioxide and ammonia. This product affords advanced resistance to corrosion and heat exposure, in even the maximum traumatic environments. To keep away from overheating or burn-via of thinner sheets on this product, better welding pace must be carried out. Stainless Steel WNR 1.4845 Split Washers is non-irresistible within the strengthened and cold worked situations. This product has precise resistance to oxidation together with precise resistance to excessive-temperature corrosion. This product is regularly utilized in refinery, food processing and chemical equipment. Alloy 310S Hex Head Screws has top notch sturdiness and occasional magnetic permeability. This product has sturdiness down to -450 Degree F (-268 Degree C). This product is likewise utilized in saggers, cryogenic structures, and food processing equipment. This steel has an excessive ease of fabrication and great formability.
Stainless Steel 310 Anchore Screw, SS DIN 1.4841 Screw, 310S Stainless Steel Head Square Neck Bolts, SS 310 Mushroom Head Square Neck Bolts Manufacturers & Suppliers in India.
Stainless Steel 310/310S Fasteners Specification
310/310S Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
---|---|
310/310S SS Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
SS 310/310S Fasteners Length | 3 mm to 200 mm |
SS 310/310S Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard of Stainless Steel 310/310S Fasteners | DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard SS 310 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 SS 310 Hex nuts |
Form of SS 310/310S Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of SS 310/310S Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of SS 310/310S Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
Packing of SS 310/310S Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating | Ptfe Coated Stainless Steel 310 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Stainless Steel 310/310S Fasteners finishing | Stainless steel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Stainless Steel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Stainless Steel 310/310S Nuts
Stainless Steel 310/310S Bolts
Stainless Steel 310/310S Screwes
Stainless Steel 310/310S Washers
Stainless Steel 310/310S Stud Bolts
Stainless Steel 310/310S Anchor Bolts
Stainless Steel 310/310S Taper pins
Stainless Steel 310/310S Dowel Pins
Stainless Steel 310/310S Socket Cap Screwe
Stainless Steel 310/310S Hex Coupling Nut
Stainless Steel 310/310S Threaded Hanger Bolt
Stainless Steel 310/310S Self Locking Nuts
Stainless Steel 310/310S Fasteners Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | EN |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | X8CrNi25-21 |
Stainless Steel 310/310S Fasteners Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24.00 - 26.00 | 0.10 max | 19.00 - 21.00 | 54.7 min |
SS 310S | 0.08 max | 2.0 max | 1.00 ma | 0.045 max | 0.030 max | 24.00 - 26.00 | 0.75 max | 19.00 - 21.00 | 53.095 min |
Stainless Steel 310/310S Fasteners Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
ASTM / DIN Specification of Stainless Steel 310/310S Fasteners
ASTM A193 | ASTM A194 | ASTM F2281 |
ASTM A193M | ASTM A194M | ASTM A962 |
ASTM A320 | ASTM F593-13a | ASTM A962M |
ASTM A320M | ASTM F594-15 | |
DIN 580 | DIN 6914 | DIN 6921 |
DIN 582 | DIN 3570 | DIN 603 |
DIN 444 | DIN 7990 | DIN 2510 |
DIN 939 | DIN 1B | DIN 976 |
DIN 933 | DIN 529 | DIN 912 |
DIN 931 | DIN 6325 |
Stainless Steel 310/310S Fasteners ANSI / ASME Standards
ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Stainless Steel 310/310S Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Other Types of Stainless Steel 310/310S Fasteners
- 310 Stainless Steel Construction screws
- SUS 310S Thread Cutting Screw
- Stainless Steel 310 Countersunk Washer
- ASTM A193 Stainless Steel 310S Tooth Lock Washer
- Stainless Steel X15CrNi25-20 Ogee Washer
- Stainless Steel DIN 1.4841 Hex Washers
- Stainless Steel 310S Allen Cap Screw Stockists
- SS UNS S31000 Particle Board Screw Exporter
- 310 Stainless Steel Concrete Screw
- SS X15CrNi25-20 Hanger Bolt Supplier
- Stainless Steel Grade 310S Industrial Fasteners
- ASTM F593 310 Fender Washer at Best Price