Nickel Alloy 200 (UNS N02200) Fasteners
Nickel UNS N02200 Fasteners, Nickel Alloy 200 Stud Bolts, Alloy 200 Industrial Fasteners, ASTM A160 Alloy 200 Carraige Bolts Manufacturer in Mumbai, India.
Victor Steel is a well-known trader and seller of Nickel 200 Fasteners, which falls in hardness and associated traits in toughness, formability and ductility. With the assist and help of the talented work force, we're capable of offer an extensive variety of this Nickel UNS N02200 Washers that are crafted from pleasant grade materials and are available in various shapes. Our corporation is surprisingly esteemed in providing this product to the customers that is exactly fabricated from the top class exceptional of confident additives as properly state-of-the-art era at properly-advanced production unit. This product presented through us are checked through our exceptional controllers. Our technical understanding permits us to fabricate and deliver an excessive exceptional this product for industrial use.
Because we preserve a deep stock at strategically-located places nationwide, you're confident of on-time transport of this product that is available in kind of sizes and thickness. These Nickel WNR 2.4066 Nuts are high-satisfactory perfect for excessive provider situations, whether or not loading situations are appreciably steady or vary among extensive limits. This product may be furnished in low loss layout through lowering contemporary density in windings, wherein preference of OEM specs as demanded through the clients. Our era for this alloy efficaciously trims down the tension of the weld, in both - fusion area and heat-affected area. It shall we air-hardenable martensitic steels for use in welded applications historically taken into consideration impractical. Ni-200 Bolts is used for diverse applications in unique industries including Oil and Gas Pipeline, City Gas Distribution, Spur Lines, Refinery & Petrochemical. It is likewise utilized in High Temperature & Low Temperature Pipes, Power Plant, Ash Handling Line, Water & Sewerage, etc. It is as properly utilized in Cooling Water Line & Auxiliary Cooling Water Line, Distribution and Transmission Lines for Irrigation Systems. It is regularly utilized in Drainage Pipes, Pipes for Potable Water, Structural Columns, Piling and Casing Pipes, Pipes for Fertilizer Plant, etc. It is usually utilized in Dredging Pipes, Mining Pipes, High Mast Pipes for Wind Mill Towers, Air Duct Piping, and others.
ASME SA164 Nickel 200 Ogee Washers Exporter, Nickel DIN 2.4066 Self Tapping Screws, Alloy 200 Flange Stud Bolts, Nickel JIS NW 2200 High Tensile Stud Bolts Manufacturers & Suppliers in India.
ASTM A160/A164 Nickel 200 Fasteners Specification
Nickel 200 Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
---|---|
Nickel Alloy 200 Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
Nickel 200 Fasteners Length | 3 mm to 200 mm |
Nickel UNS N02200 Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard of Nickel 200 Fasteners |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Alloy 200 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Alloy 200 Hex nuts |
Form of Alloy 200 Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of Alloy 200 Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of Alloy 200 Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
Packing of Alloy 200 Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating |
Ptfe Coated Nickel Alloy 200 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Nickel 200 Fasteners finishing |
Nickel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Nickel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Nickel Alloy 200 T-Nuts
Nickel Alloy 200 Hex Bolts
Nickel Alloy 200 Self Drilling Screws
Nickel Alloy 200 Belleville Washers
Nickel Alloy 200 Square U Bolts
Nickel Alloy 200 Wing Nuts
Nickel Alloy 200 Carriage Bolts
Nickel Alloy 200 Double Ended Studs
Nickel Alloy 200 Countersunk Bolts
Nickel Alloy 200 Anchor Bolts
Nickel Alloy 200 Eye Bolts
Nickel Alloy 200 Split Washers
Nickel Alloy 200 Machine Screws
Nickel Alloy 200 Lag Bolts
Nickel Alloy 200 Nord Lock Washers
Nickel Alloy 200 Springs
Nickel Alloy 200 Fasteners Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel Alloy 200 Fasteners Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel Alloy 200 Fasteners Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
ASTM / DIN Specification of Nickel Alloy 200 Fasteners
ASTM A193 | ASTM A194 | ASTM F2281 |
ASTM A193M | ASTM A194M | ASTM A962 |
ASTM A320 | ASTM F593-13a | ASTM A962M |
ASTM A320M | ASTM F594-15 | |
DIN 580 | DIN 6914 | DIN 6921 |
DIN 582 | DIN 3570 | DIN 603 |
DIN 444 | DIN 7990 | DIN 2510 |
DIN 939 | DIN 1B | DIN 976 |
DIN 933 | DIN 529 | DIN 912 |
DIN 931 | DIN 6325 |
NIckel Alloy 200 / UNS N02200 Fasteners Sizes Chart
Nickel 200 Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
---|---|---|---|---|
Nickel 200 Hex Head Bolt / Screws | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Taper Pressure Plug | M8 to M22 | – |
Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
---|---|---|---|
Hex Nut | M6 to M42 | 10 | ISO 4032 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & `10 | DIN 982 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & 10 | DIN 985 |
Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
Washers Type | SIZE | HARDNESS | STANDARD |
---|---|---|---|
Square Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
Flat Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
Hardened Washer | 12mm to 30mm | HV (300 to 370) | IS 2016 |
Hardened Steel Washer | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
Nickel Alloy 200 Werkstoff Nr. 2.4066 Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Other Types of Nickel Alloy 200 Fasteners
- Nickel Alloy 201 Wing Nuts
- 200 Nickel Coupling Nut
- Nickel JIS NW 2200 Hex Head Bolt
- Nickel UNS N02200 Socket Cap Screw
- ASTM A160 200 Nickel Alloy Machine Bolt
- Nickel EN Ni 99.2 Flange Bolt
- ASMS SA160 200 Nickel Alloy Structural Bolts
- 200 Nickel Foundation Bolts
- Nickel Alloy 200 Double Ended Stud
- Nickel JIS NW 2200 Hex Head Fasteners
- Alloy EN Ni 99.2 Lag Fasteners
- Nickel DIN 2.4066 Threaded Rod