Nickel Alloy 201 (UNS N02201) Fasteners
Nickel DIN 2.4068 Anchor Bolts, Nickel Alloy 201 Fasteners, 201 Nickel Washers, Alloy 201 Industrial Fasteners Manufacturer in Mumbai, India.
Victor Steel is a well-known trader and stockist of Nickel 201 Fasteners, which are being made from in all standard dimensions. Nickel UNS N02201 Screws are used to sign up for diverse stress gauges, stress switches, valves and waft video display units on commercial piping and air flow structures. Different kind of gases and fluids within the route of this alloy at hovering stress. It is available in unique specs, sizes and shapes. Bearing in thoughts above factors, the application for this product is being taken into consideration as 'highly critical'. Key gamers in both, oil and gas extraction and nuclear strength industries, rely upon this alloy for tubing to shield their manipulate structures and instrumentation. Thousands of metres below the surface of the sea, they're located on top of things gadgets for hydraulic pumps, measuring gadgets and more.
Meanwhile, measuring and manipulate gadgets for these Nickel WNR 2.4068 Nuts which can be sizeable within the nuclear and turbine islands of reactors as properly have a want of our excessive overall performance tubes. It is continuously formed to want the ideal diameter of the pipe, spirally welded at excessive velocity and reduce to important length. It is furnished in line with appropriate standards in addition to purchaser specs in a big range of steel grades and dimensions. Specific necessities for this alloy on execution, tolerances, lengths, and mechanical & chemical properties are presented on request. We provide more than a few this alloy mainly assembly the specs and demands important within the manufacture of shell and tube heat exchangers. Ni-201 Bolts is used for the heating, re-heating or cooling of gases, air or fluids. Meanwhile, they're tested and examined for its durability, precision and accuracy. These are basically used as a stopper to cowl the give up of a pipe. Meanwhile, they're getting used within the plumbing gadget of domestic, enterprise and industrial water deliver lines, processing and equipment apparatus, and so on. It embarks on a whole lot of deep drawn factors to fulfil our client’s necessities and standards.
Nickel Alloy 201 Self Tapping Screws, Nickel UNS N02201 High Tensile Stud Bolts, ASTM A160 Nikel 201 Double End Stud Bolts with Reduced Shank, Nickel 201 Ogee Washers Manufacturers & Suppliers in India.
ASTM A160/A164 Nickel 201 Fasteners Specification
Nickel 201 Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
---|---|
Nickel Alloy 201 Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
Nickel 201 Fasteners Length | 3 mm to 201 mm |
Nickel UNS N02201 Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard of Nickel 201 Fasteners |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Alloy 201 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Alloy 201 Hex nuts |
Form of Alloy 201 Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of Alloy 201 Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2010 W2 Certified |
Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of Alloy 201 Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
Packing of Alloy 201 Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating |
Ptfe Coated Nickel Alloy 201 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Nickel 201 Fasteners finishing |
Nickel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Nickel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Nickel Alloy 201 T-Nuts
Nickel Alloy 201 Hex Bolts
Nickel Alloy 201 Self Drilling Screws
Nickel Alloy 201 Belleville Washers
Nickel Alloy 201 Square U Bolts
Nickel Alloy 201 Wing Nuts
Nickel Alloy 201 Carriage Bolts
Nickel Alloy 201 Double Ended Studs
Nickel Alloy 201 Countersunk Bolts
Nickel Alloy 201 Anchor Bolts
Nickel Alloy 201 Eye Bolts
Nickel Alloy 201 Split Washers
Nickel Alloy 201 Machine Screws
Nickel Alloy 201 Lag Bolts
Nickel Alloy 201 Nord Lock Washers
Nickel Alloy 201 Springs
Nickel Alloy 201 Fasteners Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | - | LC-Ni 99 |
Nickel Alloy 201 Fasteners Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel Alloy 201 Fasteners Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
ASTM / DIN Specification of Nickel Alloy 201 Fasteners
ASTM A193 | ASTM A194 | ASTM F2281 |
ASTM A193M | ASTM A194M | ASTM A962 |
ASTM A320 | ASTM F593-13a | ASTM A962M |
ASTM A320M | ASTM F594-15 | |
DIN 580 | DIN 6914 | DIN 6921 |
DIN 582 | DIN 3570 | DIN 603 |
DIN 444 | DIN 7990 | DIN 2510 |
DIN 939 | DIN 1B | DIN 976 |
DIN 933 | DIN 529 | DIN 912 |
DIN 931 | DIN 6325 |
NIckel Alloy 201 / UNS N02201 Fasteners Sizes Chart
Nickel 201 Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
---|---|---|---|---|
Nickel 201 Hex Head Bolt / Screws | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Taper Pressure Plug | M8 to M22 | – |
Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
---|---|---|---|
Hex Nut | M6 to M42 | 10 | ISO 4032 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & `10 | DIN 982 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & 10 | DIN 985 |
Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
Washers Type | SIZE | HARDNESS | STANDARD |
---|---|---|---|
Square Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
Flat Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
Hardened Washer | 12mm to 30mm | HV (300 to 370) | IS 2016 |
Hardened Steel Washer | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
Nickel Alloy 201 Werkstoff Nr. 2.4068 Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Other Types of Nickel Alloy 201 Fasteners
- Nickel Alloy 201 Nuts
- 201 Nickel Alloy Bolts
- Nickel EN LC-Ni 99 Hex Head Bolt
- Nickel UNS N02201 Socket Cap Screw
- ASTM A160 201 Nickel Alloy Machine Bolt
- Alloy EN LC-Ni 99 Flange Bolt
- Nickel EN LC-Ni 99 Threaded Rod
- ASME A160 201 Nickel Alloy Structural Bolts
- Nickel 201 Foundation Bolts
- 201 Nickel Alloy Double Ended Stud
- Alloy 201 Hex Head Fasteners
- Nickel DIN 2.4068 Lag Fasteners