Cupro Nickel 90/10 (UNS C70600) Fasteners
Cu-Ni DIN 2.0872 Structural Bolts, Cupro Nickel 90/10 Flat Washer, Copper Nickel 90/10 Lock Washers, Cu-Ni 90/10 Phosphorous Screws Supplier & Exporter.
Victor Steel is a well-known distributor and supplier of Copper Nickel 90 / 10 Fasteners, which provide enduring welded bonds for sizeable applications. Different mechanical take a look at necessities for this Cu-Ni 90 / 10 Screws that includes, flaring take a look at, flange take a look at, hardness take a look at, and opposite pulling down take a look at are being supplied. In addition, it will be subjected to the non-detrimental electric powered take a look at or the hydrostatic take a look at. It is by means of and massive utilized in noncritical and low-fee applications like fire protection, business cooling water and domestic water systems. They are specifically used for small pipe diameters, typically for piping whose nominal diameter is smaller.
Copper Nickel WNR. 2.0872 Nuts are incredibly praised for its advanced strength, mild weight, competence, corrosion resistance and maximum beneficial nice. Obtainable in diverse tolerances, surface and dimensional properties, they're very lots identified for its best sturdiness and fine quality. They are thermostatically built and balanced by means of the usage of metallic alloys within the employer and guide of maximum latest technology. They offer long lasting welded bonds for momentous applications. Meanwhile, they're pretty proof against appalling climate and its chemical composition makes it tough to rust whilst the usage of in city and business environment. Copper Nickel UNS C70600 Bolts are pretty regarded for its mild weight, competence, maximum beneficial nice, corrosion resistance and advanced strength. The use of corrosion resistance for this alloy will face the situations higher due to introduction of an enthusiast shielding oxide film at the surface, if it’s being left undisturbed. Meanwhile, the usage of climate resistant for this product as nicely makes it supply in longer provider life. It suggests signal of advanced corrosion resistance over standard carbon steel due to the increase of a shielding oxide film at the metals surface which slows down in addition corrosion. It has a protective layer that develops at the steel surface while used uncoated and in dangerous climate situations.
Copper Nickel 90/10 Fasteners, Cupro Nickel 90/10 Foundation Bolts, Cu-Ni 90/10 UNS C70600 Threaded Stud, Copper ASTM B151 Cupro Nickel 90/10 Structural Bolts Manufacturers & Suppliers in India.
ASTM SB151 Cu Ni 90/10 Fasteners Specification
Copper Nickel 90/10 Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
---|---|
Cupro Nickel 90/10 Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
Cupro Nickel 90/10 Fasteners Length | 3 mm to 200 mm |
Cu-Ni 90/10 UNS C70600 Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Standard of Cupro Nickel 90/10 Fasteners |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Cu-Ni 90/10 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Cu-Ni 90/10 Hex nuts |
Form of Cupro Nickel 90/10 Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of Cu-Ni 90/10 Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
Head drive of Cu-Ni 90/10 Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
Packing of Cupro Nickel 90/10 Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating |
Ptfe Coated Cupro Nickel 90/10 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
Cupro Nickel 90/10 Fasteners finishing |
Nickel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Nickel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Copper Nickel - Cu-Ni 90/10 Nuts
Copper Nickel - Cu-Ni 90/10 Hex Bolts
Copper Nickel - Cu-Ni 90/10 Self Drilling Screws
Copper Nickel - Cu-Ni 90/10 Belleville Washers
Copper Nickel - Cu-Ni 90/10 Square U Bolts
Copper Nickel - Cu-Ni 90/10 Dome Nuts
Copper Nickel - Cu-Ni 90/10 Dowel Pins
Copper Nickel - Cu-Ni 90/10 Double Ended Studs
Copper Nickel - Cu-Ni 90/10 J Type Bolts
Copper Nickel - Cu-Ni 90/10 Set Screw
Copper Nickel - Cu-Ni 90/10 Coupling Nuts
Copper Nickel - Cu-Ni 90/10 Split Lock Washers
Copper Nickel - Cu-Ni 90/10 Countersunk Washers
Copper Nickel - Cu-Ni 90/10 Square Head Bolts
Copper Nickel - Cu-Ni 90/10 Round Rings
Copper Nickel - Cu-Ni 90/10 Conical lock washer
Copper Nickel Cu-Ni 90/10 Fasteners Equivalent Grade
STANDARD | UNS | WERKSTOFF NR. |
Cupro Nickel 90/10 | C70600 | 2.0872 |
Copper Nickel Cu-Ni 90/10 Fasteners Chemical Composition
Grade | Cu | Pb | Mn | Fe | Zn | Ni |
Cu-Ni 90/10 | 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
Copper Nickel Cu-Ni 90/10 Fasteners Mechanical Properties
Element | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
Cupro Nickel 90/10 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
Cu-Ni 90/10 Fasteners ANSI And/Or ASME Standards (Inch Series)
ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Copper Nickel Cu-Ni 90/10 - UNS N02200 Fasteners Sizes Chart
Copper Nickel Cu-Ni 90/10 Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
---|---|---|---|---|
Copper Nickel 90/10 Hex Head Bolt / Screws | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Taper Pressure Plug | M8 to M22 | – |
Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
---|---|---|---|
Hex Nut | M6 to M42 | 10 | ISO 4032 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & `10 | DIN 982 |
Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & 10 | DIN 985 |
Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
Washers Type | SIZE | HARDNESS | STANDARD |
---|---|---|---|
Square Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
Flat Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
Hardened Washer | 12mm to 30mm | HV (300 to 370) | IS 2016 |
Hardened Steel Washer | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
Cu-Ni 90/10 Werkstoff Nr. 2.0872 Fasteners Standard
Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
---|---|---|---|
DIN 931 | BS4882 | DIN 934 | DIN 912 |
DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
BS 1768 | BS 1769 | DIN 7984 | |
UNI 5731 | BS 1083 | ANSI B18.3 | |
UNI 5739 | BS 3692 | ISO 4762 | |
ISO 4014 | ISO 4032 | UNI 5931 | |
ISO 4017 | ISO 4033 | BS 2470 | |
BS 1769 | ANSI B18.2.2 | BS 4168 | |
BS 3692 | |||
ANSI B18.2.1 | |||
Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
DIN 913 | DIN 963 | DIN 938 | DIN 125 |
DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
DIN 916 | BS 1981 | BS 4439 | BS 3410 |
DIN 551 | BS 483 | BS 2693 | |
DIN 553 | BS 2470 | Spring Washers | |
DIN 438 | DIN 127 | ||
BS 4168 | BS 4464 | ||
BS 1802 |
Other Types of Copper Nickel Cu-Ni 90/10 Fasteners
- Copper Nickel 90/10 201 Nuts
- 200 Copper Nickel 90/10 Bolts
- Cu-Ni 90/10 200 Hex Head Bolt
- Cu-Ni UNS C70600 Socket Cap Screw
- ASTM B151 Long Nut Manufacturers
- Grade 70/30 Cu-Ni Industrial Studs Stockiest
- 90/10 Cupro Nickel Fasteners
- Cu-Ni DIN 2.0872 Washers
- Copper Nickel 90/10 Double Ended Stud
- High Quality 70/30 Cu-Ni Long Bolts
- CuNi 90/10 Tie Bars
- ASME SB151 Cu-Ni 90/10 Fasteners