Cupro Nickel 70/30 (UNS C71500) Fasteners
Cu-Ni 70/30 Dome Nuts, Cu-Ni DIN 2.0882 Eye Bolts, Cupro Nickel 70/30 Flat Washer, Copper Nickel 70/30 Structural Bolts Supplier & Exporter.
Cupro Nickel 70/30 Fasteners
Cu-Ni UNS C71500 Fasteners
Copper Nickel 70/30 WNR. 2.0882 Fasteners
Victor Steel is a well-known distributor and trader of Copper Nickel 70 /30 Fasteners, which are used for exclusive well-known production and business applications. Cu-Ni 70 / 30 Nuts are proof against terrible climate and its chemical composition makes it proof against rust whilst the usage of in business and concrete environment. They are synthetic and designed by means of the usage of maximum approving nice of raw material primarily based totally on substantially evolved machines technology. They are lots-popular for its advanced sturdiness, corrosion resistance, mild weight, top of the line nice and efficiency. It is likewise used for instance steel body structures, tanks and containers, bridges, exhaust systems, automobiles and gadget constructions.
As its call suggests, it's far regularly used within the manufacture of boilers and vessels for low strain applications. Copper Nickel UNS C71500 Bolts are available in a number of shapes and thickness and is produced to a totally excessive nice, designed to face up to the inner strain in boilers and valves. They are being contrived for use in strain vessel applications, and thus these sorts of alloys are utilized in such applications. They are provided as consistent in company to fitting standards similarly to consumer specs in a massive form of steel grades and dimensions. Quite clean to put in and remove, they're available for our customers in exclusive technical specs of threading and sizes as consistent by means of having their requirement. Exact necessities of this Copper Nickel WNR.2.0882 Washers on tolerances, execution, lengths, and mechanical & chemical properties are being supplied on request. They are electricity efficient, lessen dependence on fossil fuels, and assist preserve herbal assets like water. They are best for an in depth form of applications and are being synthetic by means of the usage of the maximum incredibly evolved technology and to the strictest nice needs. It is out there in quite a number corrosion and heat resistant grades to suggest an excessive-strength, incredibly workable, corrosion resistant material this is lightweight, and one hundred percentage recyclable.
Copper Nickel 70/30 Fasteners, Cupro Nickel 70/30 Washer, ASTM B151 Cupro Nickel 70/30 Hex Bolts, Cu-Ni UNS C71500 Plain Washer Manufacturers & Suppliers in India.
ASTM SB151 Cu Ni 70/30 Fasteners Specification
| Copper Nickel 70/30 Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
|---|---|
| Cupro Nickel 70/30 Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
| Cupro Nickel 70/30 Fasteners Length | 3 mm to 200 mm |
| Cu-Ni 70/30 UNS C71500 Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Cupro Nickel 70/30 Fasteners |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Cu-Ni 70/30 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Cu-Ni 70/30 Hex nuts |
| Form of Cupro Nickel 70/30 Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Cu-Ni 70/30 Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Cu-Ni 70/30 Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Cupro Nickel 70/30 Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Ptfe Coated Cupro Nickel 70/30 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Cupro Nickel 70/30 Fasteners finishing |
Nickel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Nickel, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Copper Nickel - Cu-Ni 70/30 Nuts
Copper Nickel - Cu-Ni 70/30 Hex Bolts
Copper Nickel - Cu-Ni 70/30 Self Drilling Screws
Copper Nickel - Cu-Ni 70/30 Belleville Washers
Copper Nickel - Cu-Ni 70/30 Square U Bolts
Copper Nickel - Cu-Ni 70/30 Dome Nuts
Copper Nickel - Cu-Ni 70/30 Dowel Pins
Copper Nickel - Cu-Ni 70/30 Double Ended Studs
Copper Nickel - Cu-Ni 70/30 J Type Bolts
Copper Nickel - Cu-Ni 70/30 Set Screw
Copper Nickel - Cu-Ni 70/30 Coupling Nuts
Copper Nickel - Cu-Ni 70/30 Split Lock Washers
Copper Nickel - Cu-Ni 70/30 Countersunk Washers
Copper Nickel - Cu-Ni 70/30 Square Head Bolts
Copper Nickel - Cu-Ni 70/30 Round Rings
Copper Nickel - Cu-Ni 70/30 Conical lock washer
Copper Nickel Cu-Ni 70/30 Fasteners Equivalent Grade
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 70/30 | C71500 | 2.0882 |
Copper Nickel Cu-Ni 70/30 Fasteners Chemical Composition
| Grade | Cu | Pb | Mn | Fe | Zn | Ni |
| Cu-Ni 70/30 | 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
Copper Nickel Cu-Ni 70/30 Fasteners Mechanical Properties
| Element | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| Cupro Nickel 70/30 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
Cu-Ni 70/30 Fasteners ANSI And/Or ASME Standards (Inch Series)
| ASME B18.1.1 | Small Solid Rivets | ASME B18.8.1 | Clevis Pins and Cotter Pins |
|---|---|---|---|
| ASME B18.1.2 | Large Rivets | ASME B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
| ASME B18.2.1 | Square and Hex Bolts and Screws | ASME B18.9 | Plow Bolts |
| ASME B18.2.2 | Square and Hex Nuts | ASME B18.10 | Track Bolts and Nuts |
| ASME B18.2.6 | Fasteners for use in Structural Applications | ASME B18.11 | Miniature Screws |
| ASME B18.3 | Socket Cap, Shoulder and Set Screws | ASME B18.13 | Screws and Washer Assemblies (Sems) |
| ASME B18.5 | Round Head Bolts | ASME B18.15 | Forged Eyebolts |
| ASME B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | ASME B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
| ASME B18.6.3 | Machine Screws and Machine Screws Nuts | ASME B18.21.1 | Lock Washers |
| ASME B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | ASME B18.22.1 | Plain Washers |
| ASME B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | ASME B18.23.1 | Beveled Washers |
Copper Nickel Cu-Ni 70/30 - UNS N02200 Fasteners Sizes Chart
| Copper Nickel Cu-Ni 70/30 Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
|---|---|---|---|---|
| Copper Nickel 70/30 Hex Head Bolt / Screws | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
| Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
|---|---|---|---|---|---|
| Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
| Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
| Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
| Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
| Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
| Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
| Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
| Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
| Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
| Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Taper Pressure Plug | M8 to M22 | – |
| Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
|---|---|---|---|
| Hex Nut | M6 to M42 | 10 | ISO 4032 |
| Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & `10 | DIN 982 |
| Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & 10 | DIN 985 |
| Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
| Washers Type | SIZE | HARDNESS | STANDARD |
|---|---|---|---|
| Square Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
| Flat Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
| Hardened Washer | 12mm to 30mm | HV (300 to 370) | IS 2016 |
| Hardened Steel Washer | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
Cu-Ni 70/30 Werkstoff Nr. 2.0882 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
Other Types of Copper Nickel Cu-Ni 70/30 Fasteners
- Copper Nickel 70/30 201 Long Nut
- Cupro Nickel 70/30 Bolts
- 70/30 CuNi Hex Head Bolt
- Cu-Ni UNS C71500 Socket Cap Screw
- ASTM B151 CuNi 70/30 Head Square Neck Bolts
- Grade 70/30 Cu-Ni Industrial Studs Stockiest
- Cupro Nickel 70/30 Fasteners
- Cu-Ni DIN 2.0882 Coupling Nut
- Copper Nickel 70/30 Double Ended Stud
- 70/30 CuNi Long Bolts
- ASME SB151 Cu-Ni 70/30 Tie Bars
- 70/30 Copper Nickel Machine Washer
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.