ASME SA240 SS 310S Perforated Sheet, 310 SS Chequered Plate, SS 310S Shim Sheet, Stainless Steel DIN 1.4845 Hot Rolled Plate Manufacturer, Suppliers

Stainless Steel 310/310S Sheets & Plates

310 Stainless Steel Hot Rolled Plates, SS DIN 1.4841 Chequered Plate, Stainless Steel 310S Cold Rolled Plates, SUS 310 Plate, Stainless Steel 310 Plates Manufacturer in India.

Stainless Steel 310/310S Sheets & Plates

Victor Steel is a well-known manufacturer and trader of Stainless Steel 310 / 310S Sheets & Plates, whichare provided at very reasonable rates to our clients. Stainless Steel UNS S31000 Sheets has remarkable resistance to oxidation at excessive temperatures making it appropriate for furnace rails. It has accelerated additions of chromium, nickel, and molybdenum for higher corrosion resistance and accelerated resistance to chemical assault for numerous acids. It gives better creep, pressure-to-rupture, and tensile strength at multiplied temperatures than traditional alloys. Stainless Steel WNR 1.4841 Plates stands as much as a lot of environments and has advanced resistance to chlorides and different corrosives. It may be welded the use of fusion and resistance methods. Further to terrific erosion resistance along strength features, it as nicely gives terrific formability and fabricability which can be regular of the austenitic alloys.

Low speeds and regular feeds will limit the tendency of this Alloy 310 Sheets to work harden. The excessive tiers of these factors guarantee this alloy has advanced chloride pitting and popular corrosion resistance to the traditional alloys. They are reachable in a lot of grades, thickness, width, length, and surface finishes. Stainless Steel UNS S31008 Plates could be very beneficial for information in marine environment, chemical and pharmaceutical enterprise. It is normally used within the chemical enterprise for excessive corrosion environments i.e. higher resistance to pitting. These traits of this steel bring about an excessive corrosion resistance and excessive strength values. Stainless Steel WNR 1.4845 Sheets has extra resistance decreasing acids and especially its copper addition offers it beneficial corrosion resistance to all concentrations of sulphuric acid. The low carbon content material of this steel improves cleanliness and weld strength. It is brought with copper to enhance its resistance to sturdy decreasing acids, inclusive of sulphuric acid. The addition of copper to this Alloy 310S Plates offers it corrosion resistant properties advanced to the traditional chrome nickel alloys. With its especially alloyed chemistry of nickel and molybdenum, it presents properly chloride pressure corrosion cracking resistance, pitting and popular corrosion resistance.

Grade 310 SS Polished Plates, Stainless Steel 310S Plates, SS UNS S31000 Plates, ASTM A240 310S Stainless Steel 2B Plate Suppliers in India.

Stainless Steel 310/310S Sheets & Plates Specification

310 / 310S Sheets & Plates Specifications	ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911
310 / 310S Sheets & Plates Dimension Standard	MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
SS 310 / 310S Sheets & Plates Size Range	Cold rolled ASME SA240 Grade 310 / 310S Stainless Steel Sheet 0.5-6.4 mm Hot rolled ASME SA240 Grade 310 / 310S Stainless Steel Sheet 3.0–10.0 mm
310 / 310S SS Sheets & Plates Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
SS 310 / 310S Sheets & Plates Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
SS 310 / 310S Sheets & Plates Thickness	0.3 mm to 120 mm
International Standard of Stainless Steel 310 / 310S Sheets & Plates	ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510
Tolerances (width / thickness) of Stainless Steel 310 / 310S Sheets & Plates	EN 10258/ DIN 59381) EN 10151 ASME SA240 310 / 310S SS Strips EN 10088 SA -240-310 / 310S Strips
Finish of SS 310 / 310S Sheets & Plates	2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness	Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Form	Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate
Value Added Service	Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of	SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Stainless Steel 310 / 310S Profiling	Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting

Stainless Steel 310/310S Sheets & Plates

Stainless Steel 310/310S chequred Sheets & Plates

Stainless Steel 310/310S Coils

Stainless Steel 310/310S Strips & Foils

Stainless Steel 310/310S Shim Sheets

Stainless Steel 310/310S Perforated Sheets

Stainless Steel 310/310S Decorative Sheets

Stainless Steel 310/310S Polished Plates

Stainless Steel 310/310S Hairline Finish Sheets

Stainless Steel 310/310S Mirror Finish Sheets

Stainless Steel 310/310S Hot Rolled Sheet

Stainless Steel 310/310S Blamk (circle) Sheet

Stainless Steel 310/310s Sheets & Plates Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 310	1.4841	S31000	SUS 310	310S24	20Ch25N20S2	–	X15CrNi25-20
SS 310S	1.4845	S31008	SUS 310S	310S16	20Ch23N18	–	X8CrNi25-21

Stainless Steel 310/310s Sheets & Plates Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 310	0.015 max	2 max	0.015 max	0.020 max	0.015 max	24.00 – 26.00	0.10 max	19.00 – 21.00	54.7 min
SS 310S	0.08 max	2 max	1.00 max	0.045 max	0.030 max	24.00 – 26.00	0.75 max	19.00 – 21.00	53.095 min

Stainless Steel 310/310s Sheets & Plates Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.9 g/cm3	1402 °C (2555 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	40 %

Stainless Steel 310/310s Sheets & Plates Finishes

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe