Nickel 200 Shim Sheet, Nickel UNS N02200 Plates, ASTM / ASME SB162 Nickel 200 Sheet, Nickel DIN 2.4066 Hot Rolled Plate Manufacturer, Suppliers

Nickel Alloy 200 Sheets & Plates

Nickel DIN 2.4066 Plates, Monel JIS NW 2200 Sheets, Nickel Alloy 200 Cold Rolled Plates, ASME SB162 Alloy 200 Coils Exporter in India.

Nickel Alloy 200 Sheets & Plates

Victor Steel is a well-known trader and exporter of Nickel 200 Sheets & Plates, whichresists reasonably competitive natural acids consisting of acetic. Nickel UNS N02200 Sheets is austenitic steel designed for mild to excessive corrosion resistance. It is taken into consideration to be a decrease cost option, in which its resistance to corrosion is plenty lesser. It is non-magnetic in all situations and has exquisite weldability and formability. It is taken into consideration resistant towards sea water. Copper returned-up plates on this steel for faster heat rejection are useful, while to keep away from cracks within the solder metal, it isn't always allowed to surface-fuse the copper returned up plate. It is the mixture of excessive contents of chrome, nickel, molybdenum and cupper which offers the steel the best resistance towards uniform corrosion.

The machined workings-piece of this Nickel WNR 2.4066 Sheets has a homogeneous shape even on the edge, which does now no longer alternate within the continuation of the material. It has applications in piping structures, pollutants manage equipment, heat exchangers, and bleaching structures. Use chip breakers in which viable on this steel to conquer troubles with lengthy draggy chips. It is a decrease cost alternative, however with plenty decrease corrosion resistance. It is non-magnetic in all situations and has exquisite formability and weldability. It additionally gives precise resistance to different inorganic acids consisting of hot phosphoric acid in addition to maximum natural acids. Solidification after welding on this Ni-200 Sheets reasons the redistribution of positive factors consisting of molybdenum, chromium and nickel.It is utilized in architecture, chemical containers, and heat exchangers, mining equipment, in addition to marine nuts, bolts, and screws. Another modern use of these products may be determined in architectural planning. It is likewise utilized in Petroleum Refining, Food and Beverage Processing, Medical, Mining, Power Generation — nuclear and Pulp and Paper, Pharmaceutical Processing, etc. The decrease carbon content material on this steel minimizes deleterious or dangerous carbide precipitation due to welding.Savour and redden are stored intact on this alloy, without an effect from touch with the tank material.

200 Nickel Polished Cold Drawn Plates, ASME SB162 Nickel Alloy 200 Plate, Alloy 200 Sheets, Nickel UNS N02200 Shim Sheets Manufacturer in India.

Nickel-Alloy 200 Sheets & Plates Specification

201 Sheets & Plates Specifications	ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911
201 Sheets & Plates Dimension Standard	MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc
Nickel Alloy 200 Sheets & Plates Size Range	Cold rolled ASME SB127 Grade 201 Nickel Alloy Sheet 0.5-6.4 mm Hot rolled ASME SB127 Grade 200 Nickel Alloy Sheet 3.0–10.0 mm
201 Nickel Alloy Sheets & Plates Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Nickel Alloy 200 Sheets & Plates Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Nickel Alloy 201 Sheets & Plates Thickness	0.3 mm to 120 mm
International Standard of Nickel Alloy 200 Sheets & Plates	ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510
Tolerances (width / thickness) of Nickel Alloy 201 Sheets & Plates	EN 10258/ DIN 59381) EN 10151 ASME SB127 200 Nickel Alloy Strips EN 10088 SA -240-400 Strips
Finish of Nickel Alloy 200 Sheets & Plates	2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness	Half Hard, Soft, Hard, Quarter Hard, Spring Hard
Form	Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate
Value Added Service	Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc.
Dealers & Distributor of	SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material
Nickel Alloy 200 Profiling	Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting

Nickel-Alloy 200 Sheets & Plates

Nickel-Alloy 200 chequred Sheets & Plates

Nickel-Alloy 200 310/310S Coils

Nickel-Alloy 200 Strips & Foils

Nickel-Alloy 200 Shim Sheets

Nickel-Alloy 200 Perforated Sheets

Nickel-Alloy 200 Decorative Sheets

Nickel-Alloy 200 Polished Plates

Nickel-Alloy 200 Hairline Finish Sheets

Nickel-Alloy 200 Mirror Finish Sheets

Nickel-Alloy 200 Hot Rolled Sheet

Nickel-Alloy 200 Blamk (circle) Sheet

Nickel-Alloy 200 Sheets & Plates Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	EN	OR
Nickel Alloy 200	2.4066	N02200	NW 2200	-	ХН65МВУ	NiMo16Cr15W	ЭП760

Nickel-Alloy 200 Sheets & Plates Chemical Composition

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
200	0.010 max	1.00 max	0.08 max	0.03 max	2.50 max	50.99 min*	14.50 – 16.50	4.00 – 7.00	15.00 – 17.00	0.04 max

Nickel-Alloy 200 Sheets & Plates Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 200	8.89 g/cm3	1370 °C (2500 °F)	Psi – 1,15,000 , MPa – 790	Psi – 52,000 , MPa – 355	40 %

Nickel-Alloy 200 Sheets & Plates Finishes

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R4001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe