Monel 400 Sheets & Plates
ASTM B127 Monel 400 Shim Sheets, Monel Alloy 400 Cold Rolled Plates, Alloy 400 Plates, Monel UNS N04400 Sheets Suppliers in India.
Victor Steel is a well-known supplier and stockist of Monel Alloy 400 Sheets & Plates, whichis non-magnetic within the annealed condition. Monel UNS N04400 Sheets is frequently utilized in Furnaces, Oil burners, Welding filler cord and electrodes, Heat exchangers, and extra. It isn't always cautioned for the extreme thermal surprise of repeated liquid quenching. It is likewise used for rollers, burner parts, retorts and oven linings, refractory supports, etc. It unearths utilization in cryogenic applications with low magnetic permeability and durability down to (-268 Degree C). It has resistance to hot corrosion, together with strength and durability at cryogenic temperatures. It is as nicely utilized in saggers, cryogenic structures, food processing equipment, and extra. They are used extensively in industries consisting of heat remedy and chemical processing.
Heat remedy after welding of this Monel WNR 2.4361 Plates is commonly now no longer usual, and consequently it has simplest 30 % of the thermal conductivity of non-alloyed steels.It is a higher desire for a venture that calls for loads of welding. It is utilized in exhaust manifolds, garage tanks, stainless hardware, stress vessels and piping. It is extra proof against atmospheric and different moderate kinds of corrosion than that of different austenitic steels. The excessive quantities of chromium and nickel provide this steel first-rate corrosion resistances. For out of doors fixtures like rails and bollards, it's far a perfect corrosion-resistant material. It is immune from sensitization (grain boundary carbide precipitation). Nickel Alloy 400 Sheets has corrosion resistance, the convenience with which it could be steam wiped clean and sterilized, and no want for surface coatings has additionally prompted its use in industrial kitchens and food processing plants. It is frequently utilized in Chemical processing, equipment, Rubber, plastics, pulp & paper machinery, Laboratory benches and equipment, etc. It is likewise utilized in Textile Industry Equipment, Pharmaceutical processing equipment, Architectural, and so on. Typical applications of this steel are Food Processing, Photographic, Chemical Processing, Marine Exterior Trim, and Pharmaceutical and Textile Finishing Equipment.To optimize corrosion resistance, a post-paintings annealing on this steel is recommended.
Monel JIS NW 4400 Plates, Nickel Alloy 400 Polished Cold Drawn Plates, Alloy 400 Hot Rolled Plates, Monel DIN 2.4360 Sheets Supplier in Mumbai, India.
Monel 400 Sheets & Plates Specification
400 Sheets & Plates Specifications | ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911 |
---|---|
400 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Monel 400 Sheets & Plates Size Range | Cold rolled ASME SB127 Grade 400 Monel Sheet 0.5-6.4 mm Hot rolled ASME SB127 Grade 400 Monel Sheet 3.0–10.0 mm |
400 Monel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Monel 400 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Monel 400 Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Monel 400 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Monel 400 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB127 400 Monel Strips EN 10088 SA -240-400 Strips |
Finish of Monel 400 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Monel 400 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Monel 400 Sheets & Plates
Monel 400 chequred Sheets & Plates
Monel 400 310/310S Coils
Monel 400 Strips & Foils
Monel 400 Shim Sheets
Monel 400 Perforated Sheets
Monel 400 Decorative Sheets
Monel 400 Polished Plates
Monel 400 Hairline Finish Sheets
Monel 400 Mirror Finish Sheets
Monel 400 Hot Rolled Sheet
Monel 400 Blamk (circle) Sheet
Monel 400 Sheets & Plates Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel 400 Sheets & Plates Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel 400 Sheets & Plates Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Monel 400 Sheets & Plates Finishes
Surface Finish | Definition | Application |
---|---|---|
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R4001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Other Types of Monel 400 Sheets & Plates
- Monel 400 Sheets Supplier
- ASTM B127 Monel 400 Plates
- Monel UNS N04400 400 Shim Sheet
- ASME SB127 Alloy 400 Sheets & Plates
- Monel Alloy Coils Exporter
- Monel JIS NW 4400 Monel Cold Rolled Sheets
- Monel DIN 2.4360 Plates
- Monel Alloy Sheets Exporter
- Monel JIS NW 4400 Sheets
- Nickel Alloy 400 Chequered Plate
- Alloy 400 Hot Rolled Plates
- 400 Monel Perforated Sheet