Hastelloy X Sheets & Plates
ASTM B435 Alloy X Shim Sheets, Hastelloy X Plates, Nickel Alloy X Polished Cold Drawn Plates, Hastelloy UNS N06022 Hot Rolled Plates Manufacturer in India.
Victor Steel is a well-known supplier and seller of Hastelloy Alloy X Sheets & Plates, which has excessive temperature strength and true creep resistance. Hastelloy UNS N06002 Sheets may additionally have an effect on the degrees of residual strain left the steel after is forming and becoming up for welding. Several industries demand these products that don't launch large portions of contaminants into the product. In addition, it's also utilized in Chemical and Petrochemical Processing — piping structures, stress vessels, flanges, heat exchangers, tanks, valves, fittings, and pumps. In practice, it could be used for among the same applications.It does now no longer require post-weld annealing and so is significantly utilized in heavy gauge additives. The carbon content material of this steel is confined to a most of 0.03%, which prevents sensitization in the course of welding.
Hastelloy X Plates is utilized in Fasteners, Piping, Heat exchangers, and Structures in environments that might corrode standard carbon steel. It is typically appeared because the maximum not unusual austenitic steel. In addition, this alloy with its chromium-nickel content material and occasional carbon is the maximum flexible and extensively used of the austenitic stainless steels. Meanwhile, it's far usually confined to bars so one can be machined into additives in which welding isn't always required or skinny sheets. They are formed in articles consisting of kitchen sinks or cookware which can be additionally now no longer welded. Basically, the use of these Nickel Alloy X Sheets gets rid of the want to anneal weld joints previous to the use of the finished steel form — saving time and effort. It can resist corrosion that may be due to numerous chemical compounds discovered in fruits, meat and milk. It is frequently utilized in car and aerospace structural use, together with in construction material consisting of in huge homes and chemical containers, together with for transport.Because of its excessive chromium and medium nickel contents, it has true resistance to suffixation and different forms of hot corrosion. It has a carbon content material confined to exclude the decrease end, so it's far the selection for excessive temperature applications.
Alloy X Plates, Hastelloy DIN 2.4602 Sheets, Hastelloy® Alloy X Cold Rolled Plates, ASME SB435 Hastelloy Alloy X Coils Exporter in India.
Hastelloy X Sheets & Plates Specification
X Sheets & Plates Specifications | ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911 |
---|---|
X Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Hastelloy X Sheets & Plates Size Range | Cold rolled ASME SB575 Grade X Hastelloy Sheet 0.5-6.4 mm Hot rolled ASME SB575 Grade X Hastelloy Sheet 3.0–10.0 mm |
X Hastelloy Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Hastelloy X Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Hastelloy X Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Hastelloy X Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Hastelloy X Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB575 X Hastelloy Strips EN 10088 SA -240-X Strips |
Finish of Hastelloy X Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Hastelloy X Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Hastelloy X Sheets & Plates
Hastelloy X chequred Sheets & Plates
Hastelloy X 310/310S Coils
Hastelloy X Strips & Foils
Hastelloy X Shim Sheets
Hastelloy X Perforated Sheets
Hastelloy X Decorative Sheets
Hastelloy X Polished Plates
Hastelloy X Hairline Finish Sheets
Hastelloy X Mirror Finish Sheets
Hastelloy X Hot Rolled Sheet
Hastelloy X Blamk (circle) Sheet
Hastelloy X Sheets & Plates Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS |
Hastelloy X | 2.4617 | N10665 | NW 0665 |
Hastelloy X Sheets & Plates Chemical Composition
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
Hastelloy X | 0.02 max | 1.0 max | 0.1 max | 0.03 max | 1.0 max | Bal | 1.0 max | 2.0 max | 26 – 30 | 0.04 max |
Hastelloy X Sheets & Plates Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy X | 9.2 g/cm3 | 1370 °C (2500 ºF ) | Psi – 1,10,000 , MPa – 760 | Psi – 51000 , MPa – 350 | 40 % |
Hastelloy X Sheets & Plates Finishes
Surface Finish | Definition | Application |
---|---|---|
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS RB21. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Other Types of Hastelloy X Sheets & Plates
- Grade X Hastelloy Plates
- Hastelloy UNS N10665 Perforated Sheets
- Hastelloy X Polished Sheets & Plates
- ASTM B435 Alloy X Sheets
- Hastelloy® Alloy X CR Plates Supplier
- Nickel Alloy X Plates
- Alloy X Material Checkered Plate
- ASME SB435 Hastelloy Alloy X Plates
- Hastelloy DIN 2.4617 Hot Rolled Sheets
- Nickel Alloyt X Chequered Plates
- Hastelloy NW 0665 Polished Sheets
- Alloy X Sheets Manufacturer