Copper Nickel 70/30 Sheets & Plates
70/30 Copper Nickel Plates Exporter, ASTM B122 Cu-Ni 70/30 Shim Sheets, Cupro Nickel 70/30 Plates, Cu-ni 70/30 DIN 2.0882 Sheets Manufacturer in India.
Victor Steel is a well-known distributor and trader of Copper Nickel 70 /30 Sheets & Plates, which is one of the maximum acquainted and supremely often used alloys within the family. The excessive chromium content material on this Cupro nickel 70 /30 Sheets & Plates promotes and keeps a passive film which protects the material in lots of corrosive environments. It offers a stage of formed corrosion resistance this is commonly better than acquainted different alloys. It has a homogeneous austenitic shape with an excellent distribution of alloying elements. Due to the low carbon content material on this alloy, the resistance to intergranular corrosion is likewise assured within the welded situation. It is regularly utilized in Air Pollution Control, Chemical Processing, Metallurgical Processing, and greater.
Copper Nickel UNS C71500 Sheets meets the minimal carbon content material and additionally meets the minimal tensile strength. A better work hardening rate of this steel are required for sure roll formed or stretch formed components. It is used for a huge sort of domestic and commercial applications. Each application for this alloy has its personal unique demands, and wishes a stainless steel that’s as much as the task. It additionally include silicon, manganese, and carbon, with the bulk of the composition being iron. It is utilized in corrosion resistant electric enclosures and car moulding and trim. It is likewise utilized in wheel covers, hose clamps, kitchen equipment, exhaust manifolds, etc. Copper Nickel WNR 2.0882 Plates is as nicely utilized in stainless hardware, strain vessels, garage tanks, and piping. Lower work hardening rate of this product is wanted for cold forging of screws, bolts and rivets.It isn't always vulnerable to thermal fatigue and cyclic heating. As an end result of its excessive chromium and nickel content material, it has properly resistance to sulphidation and different forms of hot corrosion. It has advanced resistance to oxidation and the retention of a bigger fraction of room temperature strength than the not unusual austenitic alloys. It resists oxidation as much as 2010 Degree F beneath mildly cyclic situations.
Cu-Ni UNS C71500 Plates, ASME SB122 Cupro Nickel 70/30 Sheets, 70/30 Copper Nickel Hot Rolled Plates, CuNi 70/30 UNS N04400 Polished Cold Drawn Plates Suppliers in India.
Copper cu-ni-90-10 sheets plates Specification
Copper cu-ni-90-10 Sheets & Plates Specifications | ASTM B127 / ASME SB127, BS EN 10088-2, en 10028-7, IS 6911 |
---|---|
Copper cu-ni-90-10 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Copper cu-ni-90-10 Sheets & Plates Size Range | Cold rolled ASME SB127 Grade cu-ni-90-10 Copper Sheet 0.5-6.4 mm Hot rolled ASME SB127 Grade cu-ni-90-10 Copper Sheet 3.0–10.0 mm |
Copper cu-ni-90-10 Copper Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Copper cu-ni-90-10 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Copper cu-ni-90-10 Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Copper cu-ni-90-10 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Copper cu-ni-90-10 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB127 cu-ni-90-10 Copper Strips EN 10088 SA -240-cu-ni-90-10 Strips |
Finish of Copper cu-ni-90-10 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Copper cu-ni-90-10 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Copper 70/30 Sheets & Plates
Copper 70/30 chequred Sheets & Plates
Copper 70/30 Perforated Sheets
Copper 70/30 Strips & Foils
Copper 70/30 Shim Sheets
Copper 70/30 Decorative Sheets
Copper 70/30 Polished Plates
Copper 70/30 Blamk (circle) Sheet
Copper 70/30 Sheets & Plates Equivalent Grade
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Copper 70/30 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Copper 70/30 Sheets & Plates Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Copper 70/30 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Copper 70/30 Sheets & Plates Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Copper 70/30 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Copper 70/30 Sheets & Plates Finishes
Surface Finish | Definition | Application |
---|---|---|
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R4001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Other Types of Copper Nickel 70/30 Sheets & Plates
- Cu-Ni 70-30 Sheets, Plates & Coils
- ASTM B122 Cu-Ni 70-30 Sheets
- Cupro Nickel 70-30 Plates
- Copper Nickel 70-30 Coils
- Grade 70-30 Cu-Ni Foils
- Cu-Ni UNS C71500 Plain Sheet
- Cu-Ni DIN 2.0882 Copper Cold Rolled Plates
- Cu-Ni 70-30 Shim Sheet
- 70-30 Cu-Ni Perforated Coils
- Copper Nickel 70-30 Slatting Coils
- Grade 70-30 Cu-Ni Polished Plates
- Cupro Nickel 70-30 Hot Rolled Plates