Alloy Steel Gr 22 Sheets & Plates
ASME SA387 Chrome Moly Grade 22 Plates, Alloy Steel Gr 22 Cold Rolled Plates, Alloy Steel Grade 22 Shim Sheets, ASTM A387 CrMo Gr 22 Circl Suppliers in India.
Alloy Steel Gr 22 Sheets & Plates
Alloy Steel Gr 22 Sheets & Plates
Victor Steel is a well-known distributor and exporter of Alloy Steel Grade 22 Sheets & Plates, which may be without problems welded and processed through standard save fabrication practices. As a molybdenum bearing material, Alloy Steel Grade 22 Slatting Sheets is notably extra proof against solutions of sulphuric acid and phosphoric acid than that of different austenitic grades. It is utilized in Appliances including fridges and dishwashers, Fasteners, Piping, Commercial food processing equipment, Heat exchangers, and so on. It will simplest face up to long-time period publicity if the grade is suitable for its environment. It does now no longer go through uniform corrosion, like carbon steel, whilst uncovered to moist environments. It is likewise utilized in Pollution manipulate equipment, Heat exchangers, Boat fittings, fee and pump trim.
Alloy Steel Grade 22 Perforated Plated includes molybdenum bearing it has a more resistance to chemical assault than different alloys. It has a higher resistance to pitting corrosion and strain corrosion cracking in chloride solutions to that of different non-molybdenum bearing steel grades.It notably outperforms in sulphuric acid and sodium hydroxide checks. Annealing of this steel is done at 1010 Degree C – 1121 Degree C, which have to be observed through rapid cooling. However, carrier checks on this alloy are endorsed to account for the consequences of precise running situations which can have an effect on corrosion behaviour. AS Grade 22 Sheets can't be hardened through heat remedy; but the material will harden due to cold working. It does now no longer react to heat remedy and may be hardened through cold working. It gives Durability and optimal utility, together with Dimensional accuracy and reliability. In formed media that don't corrode this steel will now no longer attack these molybdenum-containing grades. Due to its amazing corrosion resistance, it's been utilized in managing most of the chemical substances which can be in addition utilized by the chemical method industries. They are non-magnetic within the annealed situation however showcase a touch magnetism throughout welding or after welding.It combats the tendency to pit while in touch with phosphorus acids, bromides, chlorides, and iodides.
ASTM A387 Alloy Steel Shim Sheets, Chrome Molybdenum Gr 22 AS Plate, Alloy Steel Grade 22 Polished Plates, Gr 22 Alloy Steel Hot Rolled Plates Manufacturer in India.
Alloy Steel Grade-22 Sheets & Plates Specification
| Gr 22 Sheets & Plates Specifications | ASTM A387 / ASME SA387, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| Gr 22 Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Alloy Steel Gr 22 Sheets & Plates Size Range | Cold rolled ASME SA387 Grade Gr 22 Alloy Steel Sheet 0.5-6.4 mm Hot rolled ASME SA387 Grade Gr 22 Alloy Steel Sheet 3.0–10.0 mm |
| Gr 22 Alloy Steel Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Alloy Steel Gr 22 Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Alloy Steel Gr 22 Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Alloy Steel Gr 22 Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Alloy Steel Gr 22 Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SA387 Gr 22 Alloy Steel Strips EN 10088 SA -240-400 Strips |
| Finish of Alloy Steel Gr 22 Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Alloy Steel Gr 22 Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Alloy Steel Grade-22 Sheets & Plates
Alloy Steel Grade-22 chequred Sheets & Plates
Alloy Steel Grade-22 310/310S Coils
Alloy Steel Grade-22 Strips & Foils
Alloy Steel Grade-22 Shim Sheets
Alloy Steel Grade-22 Perforated Sheets
Alloy Steel Grade-22 Decorative Sheets
Alloy Steel Grade-22 Polished Plates
Alloy Steel Grade-22 Hairline Finish Sheets
Alloy Steel Grade-22 Mirror Finish Sheets
Alloy Steel Grade-22 Hot Rolled Sheet
Alloy Steel Grade-22 Blamk (circle) Sheet
Alloy Steel Grade-22a Sheets & Plates Equivalent Grade
| BS | EN | ASTM/ASME | DIN |
| 622-515B | 10 CRMO910 | SA387-22-2 | 10 CRMO910 |
Alloy Steel Grade-22 Sheets & Plates Chemical Composition
| C | Mn | P | S | Si | Cr | Mo |
| 0.04 - 0.15 | 0.25 - 0.66 | 0.035 | 0.035 | 0.035 | 0.5 max | 0.85 - 1.15 |
Alloy Steel Grade-22 Sheets & Plates Mechanical Properties
| A387 / SA387 Grade 22 | Class 1 | Class 2 |
| Tensile Strength (ksi) | 60-85 | 70-90 |
| Tensile Strength (MPa) | 415-585 | 485-620 |
| Yield Strength (ksi) | 35 | 45 |
| Yield Strength (MPa) | 240 | 310 |
| Elongation in 50mm (%) | 19 | 18 |
| Elongation in 50mm (%) | 22 | 22 |
Alloy Steel Grade-22 Sheets & Plates Finishes
| Surface Finish | Definition | Application |
|---|---|---|
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS RGr 111. | Kitchen utensils, Building construction. |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
| NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
Other Types of Alloy Steel Gr 22 Sheets & Plates
- Alloy Steel Gr P22 Sheets
- ASME SB387 AS Gr P22 Cold Rolled Sheet
- Alloy Steel Gr P22 Plates Supplier
- Alloy Steel Gr P22 Plates
- ASTM B387 Hot Rolled Plates Supplier
- Alloy Steel Gr P22 Chequered Plate
- ASTM B387 Gr P22 AS Plates Supplier
- Alloy Steel Gr P22 Sheets
- AS Gr P22 Shim Sheets Manufacturer
- Alloy Steel Perforated Sheets & Plates
- ASME SB387 AS Gr P22 Plates Exporter
- Alloy Steel Grade P22 Shim Sheets Stockist
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.