Nickel 201 Pipes and Tubes, Nickel UNS 2201 seamless Pipes & Tubes, Nickel DIN 2.4068 Square Pipes & Tubes Manufacturer,Suppliers

Nickel 201 Pipes & Tubes

NiMo16Cr15W Nickel Alloy Rectangular Pipes, Nickel 201 ERW Pipes, High Nickel Alloy 201 Welded Tubes, UNS N02201 Seamless Pipes Suppliers in Mumbai,India.

Nickel Alloy 201 Pipes & Tubes

ASTM B161 Nickel UNS N02201 Pipes & Tubes

Victor Steel is a known seller and stockist of Nickel Alloy 201 Pipes & Tubes, whichis robust and ductile in nature. This Nickel UNS N02201 Instrumentation Tubes may be fabricated via way of means of both hot and cold-operating procedures, and is comfortably weldable. This product has notable erosion and impingement because of turbulent water containing air bubbles and silt flowing at excessive velocities.This steel have the first-rate resistance of any of the copper alloys to impingement assault and to corrosion from maximum acids and waters. The mixture of true ductility retention and thermal conductivity at very low temperatures in this steel is tremendous for low-temperature processing and garage equipment. This steel has a good sized impact at the physical properties of the pairing.

This Nickel WNR 2.4068 Square Pipes additionally have critical additions of iron and manganese which can be important to keep true corrosion resistance. This steel elemental additions make it relatively greater proof against corrosion and erosion and with barely progressed strength, making it appropriate for greater demanding applications. This steel reveals its greatest application in regions of excessive temperatures and pressures blended with excessive pace and unfavourable turbulence. This steel is utilized in oil and gas and marine defence applications. This steel is appropriate to be used in applications that want resistance to brine solutions, aqueous and salt corrosion. The excessive oxidation resistance of this steel is visible in wet air and steam. This Ni-201 Square Tubes are used for Heat Exchangers & Condensers and are very critical for all Industrial fields. It is attacked via way of means of hydrochloric, chromic and nitric acids. This product are extensively used for marine applications because of their notable resistance to low macro-fouling rates, seawater corrosion, and true fabricability. This product demonstrates true hot and cold working properties and is comfortably weldable. Combined in company of havingan excessive ductility and toughness, this product turns into a famous grade for architectural, marine, and business applications. This product also are extensively used for dealing with seawater in every kind of heat exchanger and cooling plant.

INOX 2.4066 Pipes, High Nickel Alloy 201 Seamless Pipes, 201 Nickel Thick Wall Pipe, Nickel Alloy 201 Black Round Tubes Manufacturer in Mumbai,India.

Specification

201 Pipes Specifications	ASTM B161, B725 / ASME SB161, SB725
Dimensional specification	ANSI/ASME B36.19M, ANSI/ASME B36.10M
ASTM B161 201 Seamless Pipe Size	1 / 2" NB - 16" NB
ASTM B161 201 Welded Pipe Size	1 / 2" NB - 24" NB
ASTM B725 201 EFW Pipe Size	6" NB - 24" NB
Outside Diameter	6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Nickel 201 Pipes Manufacturing Shapes	Hydraulic, Round, Rectangle, Square, Hex, Honed
Nickel Alloy 201 Pipe Manufacturing Techniques	Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded
Nickel Alloy 201 Pipe Schedule Thickness Range	SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Nickel 201 Pipes End Types	Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Delivery Condition of Nickel 201 Pipe	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Surface Finish	No.1, No.4, No.8 Mirror Finish, 2B
Value Added Services	Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
Inspection and Test Reports	EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Marking	Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM B 161 200 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Outside Finish	2B, No.4, No.1, No.8 Mirror Finish for Nickel Alloy Pipes, Finish as per customer Requirements
Delivery Condition	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Packing of Nickel 201 Pipes	Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials	Sizes and Specifications other than above can be on request

Nickel Alloy 201 Pipes & Tubes Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	EN	OR
Nickel 201	2.4068	N02201	NW 2201	NA 12	НП-2	LC-Ni 99	-

Nickel Alloy 201 Pipes & Tubes Chemical Composition

Grade	C	Mn	Si	S	Co	Ni	Cr	Fe	Mo	P
201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	99.0 min		0.40 max	-	-

Nickel Alloy 201 Pipes & Tubes Mechanical Properties

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Nickel Alloy 201 Pipes Sizes

ASTM B161 Nickel Alloy 201 Pipes OD mm	Pipe WT mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Outside Diameter, OD (in mm) & Wall Thickness, WT (in mm) of ASTM B161 / B725 Nickel Alloy 201 Pipes

Product Description	Outside Diamter, OD (in mm)	Wall Thickness, WT (in mm)>
201 Nickel Alloy Round Pipe	6mm – 630mm	0.5mm-30mm
201 Nickel Alloy Square Pipe	12.7mm* 12.7mm to 300mm* 300mm	0.5mm-30mm
201 Nickel Alloy Rectangular Pipe	1020mm to 100201mm	0.5mm-30mm
201 Nickel Alloy Colour Coated Pipe	6mm to 630mm	0.5mm-30mm
201 Nickel Alloy Ornamental Pipes	12.7mm to 76.2mm	0.5mm-2.0mm
201 Nickel Alloy Electropolished Pipes	12.7mm to 250mm	0.5mm-30mm
201 Nickel Alloy Slot Round Pipe	12.7mm to 76.2mm	0.5mm-2.0mm
201 Nickel Alloy Triangle Pipe	16mm to 85mm	0.5mm-3.0mm
201 Nickel Alloy Hexagonal Pipes	13mm to 85mm	0.5mm-2.0mm
201 Thin-Wall Nickel Alloy Pipes	22mm0.7mm to 108mm2.0mm	0.5mm-2.0mm
201 Inner/Outside Polished Nickel Alloy Pipes	12.5mm to 203.2mm	1.0mm – 5mm
201 Nickel Alloy Seamless Pipes	6mm to 430mm	0.8mm – 30mm

ASTM B161 / B725 Nickel Alloy 201 Pipes & Tubes Sizes

ASTM B161 / B725 Nickel Alloy 201 Pipes Outer diameter mm	Pipe Wall Thickness mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Nickel Alloy 201 Pipes Standard Specifications

Nickel 201 Pipe Specifications
ASTM B161 201	Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.
ASTM B725 201	Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.
ASTM A790 201	Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.
ASTM A409 201	Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high
ASTM A376 201	Seamless austenitic pipe for high temperature applications.
ASTM A813 201	Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.
ASTM A814 201	Cold-worked welded austenitic pipe for high temperature and general corrosive service.
EN 10216 / EN 10216-5	Nickel Alloy 201 Seamless Pipes for pressure purposes
EN 10217 / EN 10217-7	201 Nickel Alloy Welded Pipes for pressure purposes