Nickel Alloy 200 Pipes & Tubes, Nickel 200 Seamless Pipes, UNS N02200 Square Pipes, UNS N02200 Welded Tubes Manufacturer,Suppliers

Nickel Alloy 200 Pipes & Tubes

Nickel Alloy 200 Seamless Pipes, High Nickel Alloy 200 Seamless Tubes, DIN 2.4066 Rectangular Welded Pipes Suppliers in Mumbai,India.

Nickel Alloy 200 Pipes & Tubes

ASTM B161 Nickel UNS N02200 Pipes & Tubes

Victor Steel is a known seller and distributor of Nickel Alloy 200 Pipes & Tubes, which has nominal temperature coefficient of electrical resistance. This product carries small however good sized quantity of additives of iron and manganese. It has notable cold working capability. This steel has been used as an opportunity to traditional steel brake lines, because it does now no longer rust. This steel falls into the mild to terrible machining ability class because of its durability. This Nickel UNS N02200 Welded Pipes is comfortably cold worked, welded and fabricated in company of none special material considerations. This steel could be very appropriate and perfect for the marine or business industries. This steel may be applied as much as seven-hundred Degree F for ASME code heat exchangers and unfired strain vessels.

This steel has excessive strength and notable corrosion resistance. This steel are proof against impingement corrosion and save you assault via way of means of alkali and acidic media. The corrosion resistance and strength of this Nickel WNR 2.4066 Heat Exchanger Tubes are progressed via way of means of the addition of iron, niobium, manganese, and or chromium. The addition of small quantities of iron and manganese make this steel perfect to be used in applications concerning excessive-pace polluted seawater. This steel are presently utilized in sizable portions for strength, offshore, and desalination industries.This product provide notable resistance to strain corrosion, erosion, and bio-fouling in seawater and brackish water. This product additionally have critical additions of iron and manganese which can be important to keep true corrosion resistance. This Ni-200 Round Pipes has excessive oxidation resistance and strain corrosion cracking resistance. Additions of iron substantially enhance the resistance of this product to erosion corrosion in flowing seawater and different competitive waters. This product are utilized in heat exchangers and condensers in seawater structures, in addition to for marine hardware. This product also are proof against chloride and sulphide strain corrosion cracking. This product have the inherent biofouling resistance of the alloys by means of having the goal of getting to know from beyond experiences.

Nickel Alloy 200 Pipes, Nickel 200 Black Round Tubes, DIN 2.4066 Tube, Nickel Alloy 200 Seamless Pipes Manufacturer in Mumbai,India.

Nickel Alloy 200 Pipes & Tubes Specification

200 Pipes Specifications	ASTM B161, B725 / ASME SB161, SB725
Dimensional specification	ANSI/ASME B36.19M, ANSI/ASME B36.10M
ASTM B161 200 Seamless Pipe Size	1 / 2" NB - 16" NB
ASTM B161 200 Welded Pipe Size	1 / 2" NB - 24" NB
ASTM B725 200 EFW Pipe Size	6" NB - 24" NB
Outside Diameter	6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Nickel 200 Pipes Manufacturing Shapes	Hydraulic, Round, Rectangle, Square, Hex, Honed
Nickel Alloy 200 Pipe Manufacturing Techniques	Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded
Nickel Alloy 200 Pipe Schedule Thickness Range	SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Nickel 200 Pipes End Types	Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Delivery Condition of Nickel 200 Pipe	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Surface Finish	No.1, No.4, No.8 Mirror Finish, 2B
Value Added Services	Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
Inspection and Test Reports	EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Marking	Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM B 161 200 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Outside Finish	2B, No.4, No.1, No.8 Mirror Finish for Nickel Alloy Pipes, Finish as per customer Requirements
Delivery Condition	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Packing of Nickel 200 Pipes	Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials	Sizes and Specifications other than above can be on request

Nickel Alloy 200 Pipes & Tubes Equivalent Grade Specification

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel 200	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	ХН65МВУ

Nickel Alloy 200 Pipes & Tubes Chemical Composition

Nickel 200	Ni	C	Mo	Mn	Si	Fe	P	S	Cu	Cr
Nickel 200	99.0 min	0.15 max	–	0.35 max	0.1 max	0.4 max	–	0.01 max	0.25 max	–

Nickel Alloy 200 Pipes & Tubes Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.9 g/cm3	1446 °C (2635 °F)	Psi – 21500 , MPa – 148	Psi – 67000 , MPa – 462	45 %

Nickel Alloy 200 Pipes Sizes

ASTM B161 Nickel Alloy 200 Pipes OD mm	Pipe WT mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Outside Diameter, OD (in mm) & Wall Thickness, WT (in mm) of ASTM B161 / B725 Nickel Alloy 200 Pipes

Product Description	Outside Diamter, OD (in mm)	Wall Thickness, WT (in mm)>
200 Nickel Alloy Round Pipe	6mm – 630mm	0.5mm-30mm
200 Nickel Alloy Square Pipe	12.7mm* 12.7mm to 300mm* 300mm	0.5mm-30mm
200 Nickel Alloy Rectangular Pipe	1020mm to 100200mm	0.5mm-30mm
200 Nickel Alloy Colour Coated Pipe	6mm to 630mm	0.5mm-30mm
200 Nickel Alloy Ornamental Pipes	12.7mm to 76.2mm	0.5mm-2.0mm
200 Nickel Alloy Electropolished Pipes	12.7mm to 250mm	0.5mm-30mm
200 Nickel Alloy Slot Round Pipe	12.7mm to 76.2mm	0.5mm-2.0mm
200 Nickel Alloy Triangle Pipe	16mm to 85mm	0.5mm-3.0mm
200 Nickel Alloy Hexagonal Pipes	13mm to 85mm	0.5mm-2.0mm
200 Thin-Wall Nickel Alloy Pipes	22mm0.7mm to 108mm2.0mm	0.5mm-2.0mm
200 Inner/Outside Polished Nickel Alloy Pipes	12.5mm to 203.2mm	1.0mm – 5mm
200 Nickel Alloy Seamless Pipes	6mm to 430mm	0.8mm – 30mm

ASTM B161 / B725 Nickel Alloy 200 Pipes & Tubes Sizes

ASTM B161 / B725 Nickel Alloy 200 Pipes Outer diameter mm	Pipe Wall Thickness mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Nickel Alloy 200 Pipes Standard Specifications

Nickel 200 Pipe Specifications
ASTM B161 200	Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.
ASTM B725 200	Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.
ASTM A790 200	Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.
ASTM A409 200	Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high
ASTM A376 200	Seamless austenitic pipe for high temperature applications.
ASTM A813 200	Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.
ASTM A814 200	Cold-worked welded austenitic pipe for high temperature and general corrosive service.
EN 10216 / EN 10216-5	Nickel Alloy 200 Seamless Pipes for pressure purposes
EN 10217 / EN 10217-7	200 Nickel Alloy Welded Pipes for pressure purposes