Cu-Ni 90/10 Seamless Pipes, Cu-Ni 90/10 Seamless Pipes & Tubes Copper Nickel 90/10 C70600 Seamless Tubes Manufacturer, Suppliers

Cupro Nickel 90/10 Pipe & Tubes

Cupro Nickel WERKSTOFF NR. 2.0872 Tubing, ASTM SB111 Cupro Nickel Seamless Pipes, UNS C70600 Welded Pipes Suppliers and Exporters in Mumbai, India.

Cupro Nickel 90/10 Pipes & Tubes

ASTM B466 Cu-Ni UNS C70600 Pipes & Tubes

Victor Steel is a known stockist and supplier of Copper Nickel 90 / 10 Pipes & Tubes, whichis a corrosion-resistant austenitic-ferrite alloy. It has the same benefits as its counterpart, wherethis product is the maximum not unusual great duplex grade within the market. This Cu-Ni 90 / 10 Pipes& Tubeshas first-rate resistance to pressure corrosion cracking (SCC) in chloride-bearing environments. This product is utilized in heat exchangers, and additionally in petrochemical and chemical processing. This product is particularly proof against carbide-associated inter-granular corrosion. This product has precise weldability and really excessive mechanical strength. This product is a particularly alloyed austenitic steel grade specifically designed to withstand natural sulphuric acid.

This Copper Nickel UNS C70600 Hexagonal Pipesadditionally have excessive mechanical strength and coffee thermal enlargement because of the shape. This product is used for those applications that is below extreme environments inclusive of chemical and desalination industries. This product has first-rate surface situation for max corrosion resistance: pickled or machined. Extended temperature range can lessen each the longevity and corrosion resistance of alloy this product. This steel have gone through assessments that suggest it has first-rate antimicrobial properties.It is appropriate for applications which contain excessive mechanical stresses, and so this steel has higher localized corrosion resistance. This steel isn't normally appropriate to be used at temperatures above three hundred Degree C. This Copper Nickel WNR 2.0872 Instrumentation Tubes additionally demonstrates precise fatigue strength, in addition to awesome resistance to pressure corrosion cracking. By agreement, this steel may be provided by means of having a PREN (Pitting Resistance Equivalent). This steel has resistance to pressure corrosion cracking of significance in many applications including hot water tanks. The best corrosion gain for this steel is their progressed resistance to CSCC while in comparison to the austenitic grades. In the annealed situation, this steel includes about certain percentage of ferrite. This steel is successful to withstand localized corrosion inclusive of pitting, crevice corrosion and SCC.This product can't be hardened through heat remedy however may be strengthened through cold working.

90/10 Cu-Ni Seamless Tubes, Cupro Nickel 90/10 Cold Rolled Coiled Tube, 90/10 Cupro Nickel Seamless Pipes, 90/10 Copper Nickel Tubing Manufacturer in India.

Copper Nickel 90/10 Pipes & Tubes Specification

Cupro Nickel 90/10 Specifications	ASTM B111, B466, 467, B543, B552 / ASME SB 111, SB466, 467, B543, B552
Dimensional specification	ANSI/ASME B36.19M, ANSI/ASME B36.10M
Cupro Nickel 90/10 Seamless Pipe Size	1 / 2" NB - 16" NB
ASTM B466 Cupro Nickel 90/10 Welded Pipe Size	1 / 2" NB - 24" NB
Cupro Nickel 90/10 EFW Pipe Size	6" NB - 24" NB
Outside Diameter	6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
ASTM B466 Cupro Nickel 90/10 Pipes Manufacturing Shapes	Hydraulic, Round, Rectangle, Square, Hex, Honed
Cupro Nickel 90/10 Pipe Manufacturing Techniques	Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded
Cupro Nickel 90/10 Pipe Schedule Thickness Range	SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Cupro Nickel 90/10 Pipes End Types	Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends)
Delivery Condition of ASTM B466 Cupro Nickel 90/10 Pipe	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Surface Finish	No.1, No.4, No.8 Mirror Finish, 2B
Value Added Services	Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing
Inspection and Test Reports	EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports
Marking	Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM B 161 200 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Outside Finish	2B, No.4, No.1, No.8 Mirror Finish for Cupro Nickel Pipes, Finish as per customer Requirements
Delivery Condition	Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Packing of Cupro Nickel 90/10 Pipes	Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials	Sizes and Specifications other than above can be on request

Cupro Nickel 90/10 Pipe & Tubes Equivalent Grade Specification

STANDARD	UNS	WERKSTOFF NR.
Cupro Nickel 90/10	C70600	2.0872

Cupro Nickel 90/10 Pipe & Tubes Chemical Composition

Cu-Ni 90/10	Cu	Pb	Mn	Fe	Zn	Ni
Cu-Ni 90/10	88.6 min	0.05 max	1.0 max	1.8 max	1 max	9-11 max

Cupro Nickel 90/10 Pipe & Tubes Mechanical Properties

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.1 g/cm3	1443 °C (2430 °F)	Psi – 35,000, MPa – 241	Psi -80,000, MPa -551	30 %

Cupro Nickel 90/10 Pipes Sizes

ASTM B466 Cupro Nickel 90/10 Pipes OD mm	Pipe WT mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Pressure Rating Of Copper Nickel 90/10 Seamless Pipe

Pipes O.D. (in.)	Copper Nickel 90/10 Pipe Wall Thickness of Pipe (inches)
Pipes O.D. (in.)	.035	.109	.028	.065	.049	.095	.083	.120
1/4	4800		3700	9500	7000
1/8	10100		7900
3/8	3100			6100	4400
5/16	3700			7300	5400
3/4				3000	2200	4600	4000
1/2	2300			4400	3200
1		3900		2200		3400	2900	4300

Outside Diameter, OD (in mm) & Wall Thickness, WT (in mm) of ASTM B466 / B552 Cu-Ni 90/10 Pipes

Product Description	Outside Diamter, OD (in mm)	Wall Thickness, WT (in mm)>
Cupro Nickel 90/10 Round Pipe	6mm – 630mm	0.5mm-30mm
Cupro Nickel 90/10 Square Pipe	12.7mm* 12.7mm to 300mm* 300mm	0.5mm-30mm
Cupro Nickel 90/10 Rectangular Pipe	1020mm to 100201mm	0.5mm-30mm
Cupro Nickel 90/10 Colour Coated Pipe	6mm to 630mm	0.5mm-30mm
Cupro Nickel 90/10 Ornamental Pipes	12.7mm to 76.2mm	0.5mm-2.0mm
Cupro Nickel 90/10 Electropolished Pipes	12.7mm to 250mm	0.5mm-30mm
Cupro Nickel 90/10 Slot Round Pipe	12.7mm to 76.2mm	0.5mm-2.0mm
Cupro Nickel 90/10 Triangle Pipe	16mm to 85mm	0.5mm-3.0mm
Cupro Nickel 90/10 Hexagonal Pipes	13mm to 85mm	0.5mm-2.0mm
Cu-Ni 90/10 Thin-Wall Pipes	22mm0.7mm to 108mm2.0mm	0.5mm-2.0mm
Cu-Ni 90/10 Inner/Outside Polished Pipes	12.5mm to 203.2mm	1.0mm – 5mm
Cupro Nickel 90/10 Seamless Pipes	6mm to 430mm	0.8mm – 30mm

ASTM B466 / B552 Cupro Nickel 90/10 Pipes & Tubes Sizes

ASTM B466 / B552 Cupro Nickel 90/10 Pipes Outer diameter mm	Pipe Wall Thickness mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

Cupro Nickel 90/10 Pipes Standard Specifications

Cupro Nickel 90/10 Pipe Specifications
ASTM B466 Cu Ni 90/10	Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.
ASTM B725 Cu Ni 90/10	Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.
ASTM A790 Cu Ni 90/10	Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.
ASTM A409 Cu Ni 90/10	Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high
ASTM A376 Cu Ni 90/10	Seamless austenitic pipe for high temperature applications.
ASTM A813 Cu Ni 90/10	Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.
ASTM A814 Cu Ni 90/10	Cold-worked welded austenitic pipe for high temperature and general corrosive service.
EN 10216 / EN 10216-5	Nickel Alloy Cu Ni 90/10 Seamless Pipes for pressure purposes
EN 10217 / EN 10217-7	Cupro Nickel 90/10 Welded Pipes for pressure purposes