Duplex Steel S31803 / S32205 Pipes & Tubes
Duplex S32205 Tubing, ASTM A790 DSS S32205 Seamless Pipes, Duplex 2205 Electropolished Tubes, UNS S31803 Welded Pepes Suppliers in Mumbai,India.
Duplex Steel 2205 Pipes & Tubes
ASTM A790 S31803/S322205 Duplex Steel Pipes & Tubes
Victor Steel is a known stockist and manufacturer of Duplex Steel S31803 / S32205 Pipes & Tubes, whichgives a greater strength for better pressures. This product includes copper and nickel because the primary factors and without or with different factors together with zinc. The dendrite shape of this product is damaged via way of means of mechanical treatments. This Duplex Alloy 2205 Seamless Pipes is proof against acid solutions and especially proof against SCC, and impingement corrosion. This product have true fabricability, and their effectiveness is notable in reducing macro-fouling levels.It is used for seawater piping systems. This steel is particularly preferred for his or her tensile strength, corrosion resistance, and cost effectiveness.
This steel has precise tensile strength, first-rate ductility while thermal conductivity, annealed and enlargement traits acquiescent for condensers and heat exchangers. This steel may be easily worked at the same time as experiencing cold and hot temperatures. This Duplex Steel WNR 1.4462 High Pressure Tubes have precise strength and longevity, alongside resistance to bio-fouling. This steel has first-rate resistance to assault through boiler feedwater, sparkling water, and steam. This steel have first-rate resistance to corrosion within the sort of reasserts in particular within the sea water. The alpha dendrites within the forged systems of this steel incorporate a big quantity of nickel beginning from the middle as much as the threshold of the dendrite. This steel is an alloy through awesome resistance to erosion and corrosion. This steel is understood for its potency, workability, weldability and formability. Although evolved for seawater corrosion resistance, this Duplex Steel 2205 Welded Pipes changed into quickly identified that the alloys additionally had inherent resistance to macro-fouling.This product had been smooth to bend and had very excessive corrosion resistance, however there has been subject approximately its low corrosion-fatigue strength. This product are an alloy of copper that includes nickel and strengthening factors, inclusive of iron and manganese. Typical application of this product within the chemical and marine industries consists of tubes and tube-sheets for condensers, alongside evaporators and heat exchangers.
Duplex Steel 1.4462 High Pressure Tube, SAF 2205 Pipes, DSS S32205 Tubes, S32205 Duplex Steel S31803 Seamless Pipes Manufacturer in Mumbai, India
S31803/S322205 Duplex Steel Specification
| S31803/S322205 Pipes Specifications | ASTM A790 / ASME SA790 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| ASTM A790 S31803/S322205 Seamless Pipe Size | 1 / 2" NB - 16" NB |
| ASTM A790 S31803/S322205 Welded Pipe Size | 1 / 2" NB - 24" NB |
| ASTM A790 S31803/S322205 EFW Pipe Size | 6" NB - 24" NB |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Duplex S31803/S322205 Pipes Manufacturing Shapes | Hydraulic, Round, Rectangle, Square, Hex, Honed |
| Duplex S31803/S322205 Pipe Manufacturing Techniques | Seamless / Welded / ERW / Fabricated / CDW / 100% X Ray Welded |
| Duplex Steel S31803/S322205 Pipe Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Duplex S31803/S322205 Pipes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Delivery Condition of Duplex S31803/S322205 Pipe | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless / Welded) Heat Number Manufacturer’s Name or Custom Logo - on request Marked Pipe Sample: ANSI B36.19 ASTM A 790 S31803/S322205 12" NB SCH 40S SEAMLESS HEAT NO. XXXX |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Duplex Steel Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Packing of Duplex S31803/S322205 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
Duplex S31803 / S32205 Pipes & Tubes Equivalent Grade Specification
| STANDARD | UNS | WERKSTOFF NR. |
| Duplex 2205 | S31803 / S32205 | 1.4462 |
Duplex S31803 / S32205 Pipes & Tubes Chemical Composition
| S31803 / S32205 | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| 1.0 | 0.03 | 0.02 | 2.0 | 3.0 – 3.5 | 22.0 – 23.0 | 0.03 | 4.5 – 6.5 | 0.14 – 0.2 | Bal |
Duplex S31803 / S32205 Pipes & Tubes Mechanical Properties
| S31803 / S32205 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
ASTM A790 Duplex Steel S31803/S32205 Pipes Sizes
| ASTM A790 Duplex Steel S31803/S32205 Pipes OD mm | Pipe WT mm | in. | Sch | Kg/m |
|---|---|---|---|---|
| 13.72 | 1.65 | 1/4 | 10S | 0.50 |
| 13.72 | 2.24 | 1/4 | 40S | 0.64 |
| 13.72 | 3.02 | 1/4 | 80S | 0.81 |
| 17.15 | 1.65 | 3/8 | 10S | 0.64 |
| 17.15 | 2.31 | 3/8 | 40S | 0.86 |
| 17.15 | 3.20 | 3/8 | 80S | 1.12 |
| 21.34 | 2.11 | 1/2 | 10S | 1.02 |
| 21.34 | 2.77 | 1/2 | 40S | 1.29 |
| 21.34 | 3.73 | 1/2 | 80S | 1.65 |
| 26.67 | 2.11 | 3/4 | 10S | 1.30 |
| 26.67 | 2.87 | 3/4 | 40S | 1.71 |
| 26.67 | 3.91 | 3/4 | 80S | 2.23 |
| 33.40 | 2.77 | 1 | 10S | 2.13 |
| 33.40 | 3.38 | 1 | 40S | 2.54 |
| 33.40 | 4.55 | 1 | 80S | 3.29 |
| 33.40 | 6.352) | 1 | 160 | 4.30 |
| 42.16 | 2.77 | 1¼ | 10S | 2.73 |
| 42.16 | 3.56 | 1¼ | 40S | 3.44 |
| 42.16 | 4.85 | 1¼ | 80S | 4.53 |
| 42.16 | 6.352) | 1¼ | 160 | 5.69 |
| 48.26 | 2.77 | 1½ | 10S | 3.16 |
| 48.26 | 3.68 | 1½ | 40S | 4.11 |
| 48.26 | 5.08 | 1½ | 80S | 5.49 |
| 60.33 | 2.77 | 2 | 10S | 3.99 |
| 60.33 | 3.91 | 2 | 40S | 5.52 |
| 60.33 | 5.54 | 2 | 80S | 7.60 |
| 60.33 | 8.742) | 2 | 160 | 11.29 |
| 73.03 | 3.05 | 2½ | 10S | 5.35 |
| 73.03 | 5.16 | 2½ | 40S | 8.77 |
| 73.03 | 7.01 | 2½ | 80S | 11.59 |
| 88.90 | 3.05 | 3 | 10S | 6.56 |
| 88.90 | 5.49 | 3 | 40S | 11.47 |
| 88.90 | 7.62 | 3 | 80S | 15.51 |
| 88.90 | 11.132) | 3 | 160 | 21.67 |
| 101.60 | 3.05 | 3½ | 10S | 7.53 |
| 101.60 | 5.74 | 3½ | 40S | 13.78 |
| 101.60 | 8.08 | 3½ | 80S | 18.92 |
| 114.30 | 3.05 | 4 | 10S | 8.50 |
| 114.30 | 6.02 | 4 | 40S | 16.32 |
| 114.30 | 8.56 | 4 | 80S | 22.67 |
| 114.30 | 13.492) | 4 | 160 | 34.05 |
| 141.30 | 6.55 | 5 | 40S | 22.10 |
| 141.30 | 9.53 | 5 | 80S | 31.44 |
| 141.30 | 15.882) | 5 | 160 | 49.87 |
| 168.28 | 3.4 | 6 | 10S | 14.04 |
| 168.28 | 7.11 | 6 | 40S | 28.69 |
| 168.28 | 10.97 | 6 | 80S | 43.21 |
| 168.28 | 14.27 | 6 | 120 | 54.75 |
| 168.28 | 18.262) | 6 | 160 | 68.59 |
| 219.08 | 8.18 | 8 | 40S | 43.20 |
| 219.08 | 12.7 | 8 | 80S | 65.63 |
| 219.08 | 18.23 | 8 | 120 | 91.30 |
| 219.08 | 23.012) | 8 | 160 | 112.97 |
Pressure Rating Of Duplex Steel S31803/S32205 Seamless Pipe
| Pipes O.D. (in.) | Duplex Steel 2205 Pipe Wall Thickness of Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .035 | .109 | .028 | .065 | .049 | .095 | .083 | .120 | |
| 1/4 | 4800 | 3700 | 9500 | 7000 | ||||
| 1/8 | 10100 | 7900 | ||||||
| 3/8 | 3100 | 6100 | 4400 | |||||
| 5/16 | 3700 | 7300 | 5400 | |||||
| 3/4 | 3000 | 2200 | 4600 | 4000 | ||||
| 1/2 | 2300 | 4400 | 3200 | |||||
| 1 | 3900 | 2200 | 3400 | 2900 | 4300 | |||
Outside Diameter, OD (in mm) & Wall Thickness, WT (in mm) of ASTM A790 Duplex Steel S31803/S32205 Pipes
| Product Description | Outside Diamter, OD (in mm) | Wall Thickness, WT (in mm)> |
|---|---|---|
| S31803/S32205 Duplex Steel Round Pipe | 6mm – 630mm | 0.5mm-30mm |
| S31803/S32205 Duplex Steel Square Pipe | 12.7mm* 12.7mm to 300mm* 300mm | 0.5mm-30mm |
| S31803/S32205 Duplex Steel Rectangular Pipe | 10*20mm to 100*200mm | 0.5mm-30mm |
| S31803/S32205 Duplex Steel Colour Coated Pipe | 6mm to 630mm | 0.5mm-30mm |
| S31803/S32205 Duplex Steel Ornamental Pipes | 12.7mm to 76.2mm | 0.5mm-2.0mm |
| S31803/S32205 Duplex Steel Electropolished Pipes | 12.7mm to 250mm | 0.5mm-30mm |
| S31803/S32205 Duplex Steel Slot Round Pipe | 12.7mm to 76.2mm | 0.5mm-2.0mm |
| S31803/S32205 Duplex Steel Triangle Pipe | 16mm to 85mm | 0.5mm-3.0mm |
| S31803/S32205 Duplex Steel Hexagonal Pipes | 13mm to 85mm | 0.5mm-2.0mm |
| S31803/S32205 Thin-Wall Duplex Steel Pipes | 22mm*0.7mm to 108mm*2.0mm | 0.5mm-2.0mm |
| S31803/S32205 Inner/Outside Polished Duplex Steel Pipes | 12.5mm to 203.2mm | 1.0mm – 5mm |
| S31803/S32205 Duplex Steel Seamless Pipes | 6mm to 430mm | 0.8mm – 30mm |
ASTM A790 Duplex Steel S31803/S32205 Pipes & Tubes Sizes
| ASTM A790 Duplex Steel S31803/S32205 Pipes Outer diameter mm |
Pipe Wall Thickness mm |
in. | Sch | Kg/m |
|---|---|---|---|---|
| 13.72 | 1.65 | 1/4 | 10S | 0.50 |
| 13.72 | 2.24 | 1/4 | 40S | 0.64 |
| 13.72 | 3.02 | 1/4 | 80S | 0.81 |
| 17.15 | 1.65 | 3/8 | 10S | 0.64 |
| 17.15 | 2.31 | 3/8 | 40S | 0.86 |
| 17.15 | 3.20 | 3/8 | 80S | 1.12 |
| 21.34 | 2.11 | 1/2 | 10S | 1.02 |
| 21.34 | 2.77 | 1/2 | 40S | 1.29 |
| 21.34 | 3.73 | 1/2 | 80S | 1.65 |
| 26.67 | 2.11 | 3/4 | 10S | 1.30 |
| 26.67 | 2.87 | 3/4 | 40S | 1.71 |
| 26.67 | 3.91 | 3/4 | 80S | 2.23 |
| 33.40 | 2.77 | 1 | 10S | 2.13 |
| 33.40 | 3.38 | 1 | 40S | 2.54 |
| 33.40 | 4.55 | 1 | 80S | 3.29 |
| 33.40 | 6.352) | 1 | 160 | 4.30 |
| 42.16 | 2.77 | 1¼ | 10S | 2.73 |
| 42.16 | 3.56 | 1¼ | 40S | 3.44 |
| 42.16 | 4.85 | 1¼ | 80S | 4.53 |
| 42.16 | 6.352) | 1¼ | 160 | 5.69 |
| 48.26 | 2.77 | 1½ | 10S | 3.16 |
| 48.26 | 3.68 | 1½ | 40S | 4.11 |
| 48.26 | 5.08 | 1½ | 80S | 5.49 |
| 60.33 | 2.77 | 2 | 10S | 3.99 |
| 60.33 | 3.91 | 2 | 40S | 5.52 |
| 60.33 | 5.54 | 2 | 80S | 7.60 |
| 60.33 | 8.742) | 2 | 160 | 11.29 |
| 73.03 | 3.05 | 2½ | 10S | 5.35 |
| 73.03 | 5.16 | 2½ | 40S | 8.77 |
| 73.03 | 7.01 | 2½ | 80S | 11.59 |
| 88.90 | 3.05 | 3 | 10S | 6.56 |
| 88.90 | 5.49 | 3 | 40S | 11.47 |
| 88.90 | 7.62 | 3 | 80S | 15.51 |
| 88.90 | 11.132) | 3 | 160 | 21.67 |
| 101.60 | 3.05 | 3½ | 10S | 7.53 |
| 101.60 | 5.74 | 3½ | 40S | 13.78 |
| 101.60 | 8.08 | 3½ | 80S | 18.92 |
| 114.30 | 3.05 | 4 | 10S | 8.50 |
| 114.30 | 6.02 | 4 | 40S | 16.32 |
| 114.30 | 8.56 | 4 | 80S | 22.67 |
| 114.30 | 13.492) | 4 | 160 | 34.05 |
| 141.30 | 6.55 | 5 | 40S | 22.10 |
| 141.30 | 9.53 | 5 | 80S | 31.44 |
| 141.30 | 15.882) | 5 | 160 | 49.87 |
| 168.28 | 3.4 | 6 | 10S | 14.04 |
| 168.28 | 7.11 | 6 | 40S | 28.69 |
| 168.28 | 10.97 | 6 | 80S | 43.21 |
| 168.28 | 14.27 | 6 | 120 | 54.75 |
| 168.28 | 18.262) | 6 | 160 | 68.59 |
| 219.08 | 8.18 | 8 | 40S | 43.20 |
| 219.08 | 12.7 | 8 | 80S | 65.63 |
| 219.08 | 18.23 | 8 | 120 | 91.30 |
| 219.08 | 23.012) | 8 | 160 | 112.97 |
Duplex Steel S31803/S32205 Pipes Standard Specifications
| Duplex S31803/S32205 Pipe Specifications | |
| ASTM A790 S31803/S32205 | Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding. |
|---|---|
| ASTM A790 S31803/S32205 | Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding. |
| ASTM A790 S31803/S32205 | Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking. |
| ASTM A409 S31803/S32205 | Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high |
| ASTM A376 S31803/S32205 | Seamless austenitic pipe for high temperature applications. |
| ASTM A813 S31803/S32205 | Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications. |
| ASTM A814 S31803/S32205 | Cold-worked welded austenitic pipe for high temperature and general corrosive service. |
| EN 10216 / EN 10216-5 | Duplex Steel S31803/S32205 Seamless Pipes for pressure purposes |
| EN 10217 / EN 10217-7 | S31803/S32205 Duplex Steel Welded Pipes for pressure purposes |
Other Types of Duplex S31803 / S32205 Pipes & Tubes
- Custom Duplex Steel S31803 Tubes
- ASTM SA789 DSS S31803 Seamless Pipes
- Duplex Stainless Steel S31803 Polished Tubes
- WERKSTOFF NR. 1.4462 Welded Pipe & Tubes
- Duplex Steel S31803 Welded Pipes
- SAF 2205 Seamless Tubing
- Duplex Steel S31803 Pipes & Tubes
- UNS S31803 / S32205 Duplex Steel Seamless Pipes
- Duplex 2205 Rectangular Pipes
- DSS EN 10217-7 Seamless Tubing
- ASTM SA789 Duplex Steel Bush Hex Pipes
- Duplex Stainless Steel S32205 Decorative Pipes
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.