Monel K500 (UNS N05500) Fasteners
Monel UNS N05500 Fasteners, Monel K500 Stud Bolts, Nickel Alloy K500 Industrial Fasteners, Alloy K500 Carraige Bolts Manufacturer in Mumbai, India.
Monel K500 Fasteners
Monel UNS N05500 Fasteners
Monel WERKSTOFF NR. 2.4375 Fasteners
Victor Steel is a well-known trader and manufacturer of Monel Alloy K500 Fasteners, which has capabilities like Easy installation, Enhanced practical life, Low energy consumption, and more. Our business enterprise has been mentioned in supplying this Monel UNS N05500 Nuts to the customers, which reveals use in manufacturing of various energy transformer, electromagnetic iron core, reactor, and others. Our business enterprise has additionally set benchmark in supplying this steel to the customers, that is synthetic via way of means of the use of top class fine raw fabric and advanced era below the course of professional specialists at properly-geared up manufacturing unit. With a specific expertise of the applicable enterprise, we introduce ourselves because the main producer and dealer of precision-designed this steel, which might be praised within the marketplace for its excessive strength.
Monel WNR 2.4375 Bolts is beneficial on every occasion a want arises for accurate corrosion resistance and good sized machining is required. This steel is exported to locations close to and a ways which communicate volumes of the technological sophistication of our product. This steel have higher brightness with discontinuous route used as internal and outside for electric appliances, building, kitchen utensils, etc. We make certain our levels of this steel are machine-examined earlier than they're provided to the marketplace. Our business enterprise is broadly preferred in supplying this product to the customers that is sourced from robust fabric for constructing. With our vast area information, we are capable of bring about an extensive variety of this Nickel Alloy K500 Screws within the marketplace, which might be produced via way of means of the crew of our hardworking specialists following the mounted norms and suggestions of the enterprise. Owing to our wealthy enterprise revel in and knowledge, we're specialised in supplying our prestigious customers this product, which has capabilities like Easy installation, Non-corrosive, Strong design, and more. Strength and durability favoured on this product may be manipulated via way of means of temperate variety within the heat remedy process. The utilization of this product is properly described and the product is broadly used accordingly.
Monel DIN 2.4375 High Tensile Stud Bolts, ASTM F467 Monel K500 Hex Bolts, Monel Alloy Stud Bolts, K500 Monel Socket Head Cap Screws Manufacturers & Suppliers in India.
ASTM A160/A164 Monel K500 Fasteners Specification
| K500 Fasteners Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
|---|---|
| K500 Monel Alloy Fasteners size | Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes Machine Screws Size : M1.6 - M12 Self Tapping Screw Size : No.2 - No. 14 |
| Monel Alloy K500 Fasteners Length | 3 mm to 200 mm |
| Monel Alloy K500 Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Monel K500 Fasteners |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Monel Monel® Alloy K500 Stud Bolt length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Monel Alloy K500 Hex nuts |
| Form of Monel Alloy K500 Fasteners | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Monel Alloy K500 Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Monel Alloy K500 Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Monel Alloy K500 Fasteners | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Ptfe Coated Monel K500 Fasteners Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Monel K500 Fasteners finishing |
Monel : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Monel Alloy, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Monel K500 Hex Nuts
Monel K500 Square Bolts
Monel K500 Domed Cap Nuts
Monel K500 Belleville Washers
Monel K500 Self Drilling Screw
Monel K500 Wing Nuts
Monel K500 Carriage Bolts
Monel K500 Double Ended Studs
Monel K500 Hex Shoulder Bolts
Monel K500 Threaded Rod/Bolts
Monel K500 Coach Screw
Monel K500 Split Washers
Monel K500 Machine Screws
Monel K500 Lag Bolts
Monel K500 Nord Lock Washers
Monel K500 Springs
Monel K500 Fasteners Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
Monel K500 Fasteners Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Monel K500 Fasteners Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
ASTM / DIN Specification of Monel K500 Fasteners
| ASTM A193 | ASTM A194 | ASTM F2281 |
| ASTM A193M | ASTM A194M | ASTM A962 |
| ASTM A320 | ASTM F593-13a | ASTM A962M |
| ASTM A320M | ASTM F594-15 | |
| DIN 580 | DIN 6914 | DIN 6921 |
| DIN 582 | DIN 3570 | DIN 603 |
| DIN 444 | DIN 7990 | DIN 2510 |
| DIN 939 | DIN 1B | DIN 976 |
| DIN 933 | DIN 529 | DIN 912 |
| DIN 931 | DIN 6325 |
Monel K500 / UNS N05500 Fasteners Sizes Chart
| Monel K500 Bolt Type | SIZE | PROPERTY CLASS | TENSILE STRENGTH | STANDARD |
|---|---|---|---|---|
| Monel K500 Hex Head Bolt / Screws | M4 to M80 | 10.9 | 1040N / mm2 min | ISO 4017 (Full Thread) ISO 4014 (Half Thread) |
| Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
|---|---|---|---|---|---|
| Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
| Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
| Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
| Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
| Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
| Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
| Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
| Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
| Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
| Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
| Taper Pressure Plug | M8 to M22 | – |
| Nuts Type | SIZE | PROPERTY CLASS | STANDARD |
|---|---|---|---|
| Hex Nut | M6 to M42 | 10 | ISO 4032 |
| Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & `10 | DIN 982 |
| Nylock Nut | M6 to M20 (Gr.8) M10 to M24 (Gr.10) |
8 & 10 | DIN 985 |
| Hex Weld Nut | M6 to M12 | 8 | DIN 929 |
| Washers Type | SIZE | HARDNESS | STANDARD |
|---|---|---|---|
| Square Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 7980 |
| Flat Section Spring Washer | 3mm to 39mm | HV (430 to 530) | DIN 127 B |
| Hardened Washer | 12mm to 30mm | HV (300 to 370) | IS 4006 |
| Hardened Steel Washer | 12mm to 56mm | Rockwell 26 to 45 (HDG) Rockwell 38 to 45 (Coated) |
ASTM F436M |
Monel K500 Werkstoff Nr. 2.4375 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
Other Types of Monel K500 Fasteners
- Monel K500 Industrial Fasteners
- Monel Alloy K500 Bolts
- Nickel Alloy K500 Hex Head Bolt
- Monel UNS N05500 Socket Cap Screw
- ASTM A160 K500 Monel Alloy Machine Bolt
- Monel® Alloy K500 Elevator Bolt
- Alloy K500 Coupling Nuts Exporter
- Nickel Alloy K500 Washer Stockholder in Mumbai
- Monel DIN 2.4375 Machine Bolt
- Monel® Alloy K500 Studs Manufacturer In Mumbai
- Monel K500 Marine Anchors Stockist
- Monel Alloy K500 Fasteners
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.