Hastelloy C276 Socket Weld Forged Fittings
C276 Hastelloy Socket Weld Tee, Hastelloy DIN 2.4819 Forged Fittings, Hastelloy® Alloy C276 Socket Weld Reducers Fittings, Alloy C276 Socket weld Fittings Manufacturer in India.
Hastelloy C276 Socketweld Forged Fittings
ASTM B564 Hastelloy C276 Socketweld Fittings
Hastelloy UNS N10276 Socketweld Fittings
Victor Steel is a recognised stockist and exporter of Hastelloy Alloy C276 Socket Weld Fittings, which has top notch weldability and so is effectively fabricated. Rapid adjustments in temperature (which might be not unusual in heat treat applications) aren't as an awful lot of a difficulty for this product. Some usual applications for this product have included heat shields and furnace hardware. Hastelloy UNS N10276 Socket Weld Union Fittings has also top notch fabricability and extraordinary corrosion resistance. This product is mainly proof against pitting and crevice corrosion. This product is ideal for sea water applications. This product is used for strain vessels in a temperature variety from -196 Degree C to 450 Degree C. This product has ability to face up to excessive pressure and a huge variety of temperatures, each inside and outside of water.
Hastelloy WNR 2.4819 Socket Weld Plug Fittings acts with the molybdenum to stiffen the alloy’s matrix. This product permits preserving excessive strength and longevity at temperatures starting from cryogenic as much as 2000 Degree F (1093 Degree C). This product has noticeably alloyed composition additionally offers a large stage of popular corrosion resistance. This steel can be welded in both the annealed or precipitation (age) hardened situation. High tolerance to extraordinarily excessive and occasional temperatures permits this steel to be welded and annealed into products as a way to face up to severe conditions.The slow precipitation hardening reaction of this steel permits it to be effectively welded without hardening or cracking. The welding traits of this steel, mainly its resistance to post-weld cracking, are extraordinary. Nickel Alloy C276 Socket Weld Lateral Tee Fittings retains strength over a huge temperature variety. This steel is utilized in jet engine and excessive-pace airframe components together with wheels, spacers and buckets. This steel is used from cryogenic temperatures as much as long time carrier at 1200 Degree F. This steel well-known shows top notch tensile and impact strength. This steel has higher mechanical properties at decrease temperatures. This steel has top notch creep-rupture strength at temperatures to seven-hundred Degree C.
Hastelloy UNS 2.4819 Socketweld Fittings, Nickel Alloy C276 Socket weld Tee, NiMo16Cr15W Alloy Forged Pipe Coupling, ASTM B564 Hastelloy Alloy C276 Hex Head Union Suppliers in India.
Hastelloy C276 Socket Weld Fittings Specification
| Hastelloy C276 Forged Socket Weld Fittings Specifications | ASTM B564/ ASME SB564 |
|---|---|
| Alloy C276 Socket Weld Fittings size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Hastelloy C276 Socket Weld Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Hastelloy C276 Forged Fittings Types | Socketweld Fittings, Screwed-Threaded Fittings |
| ASTM B564 C276 Hastelloy Forged Fittings Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
| Hastelloy C276 Forged Fittings Thread | NPT, BSPT, BSPP |
| C276 Hastelloy Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Nickel Alloy C276 Forged Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM B564 Hastelloy C276 Socket Weld 90 Deg Elbow
ASTM B564 Hastelloy C276 Socket Weld 45 Deg Elbow
ASTM B564 Hastelloy C276 Socket Weld Tee
ASTM B564 Hastelloy C276 Socket Weld Cross
ASTM B564 Hastelloy C276 Socket Weld Half Coupling
ASTM B564 Hastelloy C276 Socket Weld Full Coupling
ASTM B564 Hastelloy C276 Socket Weld Cap
ASTM B564 Hastelloy C276 Socket Weld Union
ASTM B564 Hastelloy C276 Socket Weld Reducers
ASTM B564 Hastelloy C276 Socket Weld Inserts
ASTM B564 Hastelloy C276 Socket Weld Lateral Tee
ASTM B564 Hastelloy C276 Socket Weld Pipe Nipple
ASTM B564 Hastelloy C276 Socket Weld Bushings
ASTM B564 Hastelloy C276 Socket Weld Round Plugs
ASTM B564 Hastelloy C276 Socket Weld Hex Plug
ASTM B564 Hastelloy C276 Socket Weld Bends
Hastelloy C276 Socket Weld Equivalent Grade Specification
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C276 | N10276 | 2.4819 | – | NiMo16Cr15W | NW 0276 | – | ХН65МВУ |
Hastelloy C276 Socket Weld Chemical Composition
| Grade | C | Mn | Si | P | S | Co | Mo | Ni | Fe | Cr |
| Hastelloy C276 | 0.10 max | 1.00 max | 0.08 max | 0.04 max | 0.03 max | 2.50 max | 15-17 | 50.99 min* | 4.00 – 7.00 | 14.50-16.50 |
Hastelloy C276 Socket Weld Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52000 , MPa – 355 | 40 % |
Manufacturing Standards of Hastelloy C276 Socket Weld Fittings
| ASTM B564 / B564M | Forged Fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Stainless Steel Forged Fittings |
| BS21 | Threading. |
| BS3799 | Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry |
| ANSI B16.11 | Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings |
| ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
| ISO 4144 | Stainless steel fittings threaded to ISO 7-1. |
| MSS SP-95 | Swage(d) Nipples and Bull Plugs |
ASTM B564 Hastelloy C276 Socket Weld Fittings Size Range & Dimensions
| DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
|---|---|---|---|---|
| 1/16″ | 7.895 | 6.00 | 27 | 0.941 |
| 1/8″ | 10.242 | 8.25 | 27 | 0.941 |
| 1/4″ | 13.616 | 10.70 | 18 | 1.411 |
| 3/8″ | 17.055 | 14.10 | 18 | 1.411 |
| 1/2″ | 21.223 | 17.40 | 14 | 1.814 |
| 3/4″ | 26.568 | 22.60 | 14 | 1.814 |
| 1″ | 33.228 | 28.50 | 11.5 | 2.209 |
| 1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
| 1½” | 48.054 | 43.50 | 11.5 | 2.209 |
| 2″ | 60.092 | 55.00 | 11.5 | 2.209 |
| 2½” | 72.699 | 65.50 | 8 | 3.175 |
| 3″ | 88.608 | 81.50 | 8 | 3.175 |
| 3½” | 101.316 | 94.30 | 8 | 3.175 |
| 4″ | 113.973 | 107.00 | 8 | 3.175 |
| 5″ | 141.300 | 134.384 | 8 | 3.175 |
| 6″ | 168.275 | 161.191 | 8 | 3.175 |
| 8″ | 219.075 | 211.673 | 8 | 3.175 |
| 10″ | 273.050 | 265.311 | 8 | 3.175 |
| 12″ | 323.850 | 315.793 | 8 | 3.175 |
Hastelloy C276 Socket Weld Forged Fittings Standard
| Description | Class Designation | ||
|---|---|---|---|
| 3000 | 6000 | 9000 | |
| Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
Other Types of Hastelloy C276 Socket Weld Forged Fittings
- Hastelloy DIN 2.4819 Square Head Plugs
- Hastelloy Alloy C276 Forged Socket Weld Bushing
- Alloy C276 Screwed Street Elbow
- Grade C22 Hastelloy Unequal Cross
- Nickel Alloy C276 Socket Weld Hex Head Bushing
- C276 Hastelloy Forged Socket Weld Hex Nipple
- C276 Hastelloy Socket Weld 45 Deg Elbow
- ASTM B564 C276 Socket Weld Union
- Hastelloy C276 Forged 90 Degree Elbow
- Nickel Alloy C276 90 Degree BSP Socket Weld Elbow
- Hastelloy Grade C276 Socket Weld Coupling
- Alloy Gost ХН65МВУ Socket Weld Reducing Tee
- Stainless Steel Socket Weld Forged Fittings
- Inconel Socket Weld Forged Fittings
- Hastelloy Socket Weld Forged Fittings
- Monel Socket Weld Forged Fittings
- Nickel Socket Weld Forged Fittings
- Duplex Socket Weld Forged Fittings
- Super Duplex Socket Weld Forged Fittings
- Alloy Steel Socket Weld Forged Fittings
- Cupro Nickel Socket Weld Forged Fittings
- Carbon Steel Socket Weld Forged Fittings
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.