Hastelloy B3 Socket Weld Forged Fittings
ASME SB564 Alloy B3 Socket Weld Cross, Hastelloy B3 Hex Plug, Hastelloy WERKSTOFF NR. 2.4600 Socketweld Fittings, Alloy B3 Socket Weld Union Manufacturer in India.
Hastelloy B3 Socketweld Forged Fittings
ASTM B564 Hastelloy B3 Socketweld Fittings
Hastelloy UNS N10675 Socketweld Fittings
Victor Steel is a recognised stockist and trader of Hastelloy Alloy B3 Socket Weld Fittings, which has exquisite resistance to pitting and crevice corrosion. The molybdenum on this steel additionally aids resistance to pitting and crevice corrosion. The fabrication of this steel is traditional of nickel-base alloys, with material being without problems formable and weldable with the aid of using plenty of techniques. Hastelloy UNS N10675 Socket Weld Elbow Fittings is an age hardenable nickel primarily based totally alloy that consists of chromium and iron as crucial ingredients. The chemical composition on this product is designed to offer an aggregate of excessive electricity and exquisite corrosion resistance. The chromium content material on this product offers resistance to oxidizing environments.
Hastelloy WNR 2.4600 Socket Weld Tee Fittings is used within the manufacturing of numerous styles of magnets for business use. The nickel on this product, along with the molybdenum and copper, additionally offers first-rate resistance to decreasing chemicals. This product is used for valves and tubing, in addition to locating use in excessive-electricity piping systems. This product is used for surface and down-hollow hardware in sour gas wells and for oil-manufacturing equipment. The aggregate of Nickel and Chromium on this product renders safety in each oxidizing and decreasing atmospheres. This product has excessive stages of nickel make sure safety in opposition to strain corrosion cracking. Controlled chemical composition limits in this steel are carried out within the nuclear enterprise to cast off the hazard of SCC through excessive purity water containing chloride ions. With excessive nickel content material, this steel is without a doubt proof against chloride-brought about SCC. This Nickel Alloy B3 Socket Weld Cross Fittings has suitable corrosion resistance of the dry chlorine and chlorine hydride. This steel is used for nuclear engineering and sparking electrodes. This product is utilized in air and vacuum melting, vacuum arc and electroslag re-melting. The excessive nickel content material of this steel gives suitable resistance to decreasing environments. This steel is utilized in a whole lot of corrosion resisting applications. This steel functions superior strength and may be easily formed.
Hastelloy B3 Socket weld Pipe 45 Deg. Elbow, Alloy B3 Socketweld Union, ASTM B564 Hastelloy Alloy B3 Socketweld 90deg Elbow, Hastelloy UNS N10675 Socketweld Bull Plug Suppliers in India.
Hastelloy B3 Socket Weld Fittings Specification
| Hastelloy B3 Forged Socket Weld Fittings Specifications | ASTM B564/ ASME SB564 |
|---|---|
| Alloy B3 Socket Weld Fittings size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Hastelloy B3 Socket Weld Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Hastelloy B3 Forged Fittings Types | Socketweld Fittings, Screwed-Threaded Fittings |
| ASTM B564 B3 Hastelloy Forged Fittings Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
| Hastelloy B3 Forged Fittings Thread | NPT, BSPT, BSPP |
| B3 Hastelloy Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Nickel Alloy B3 Forged Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM B564 Hastelloy B3 Socket Weld 90 Deg Elbow
ASTM B564 Hastelloy B3 Socket Weld 45 Deg Elbow
ASTM B564 Hastelloy B3 Socket Weld Tee
ASTM B564 Hastelloy B3 Socket Weld Cross
ASTM B564 Hastelloy B3 Socket Weld Half Coupling
ASTM B564 Hastelloy B3 Socket Weld Full Coupling
ASTM B564 Hastelloy B3 Socket Weld Cap
ASTM B564 Hastelloy B3 Socket Weld Union
ASTM B564 Hastelloy B3 Socket Weld Reducers
ASTM B564 Hastelloy B3 Socket Weld Inserts
ASTM B564 Hastelloy B3 Socket Weld Lateral Tee
ASTM B564 Hastelloy B3 Socket Weld Pipe Nipple
ASTM B564 Hastelloy B3 Socket Weld Bushings
ASTM B564 Hastelloy B3 Socket Weld Round Plugs
ASTM B564 Hastelloy B3 Socket Weld Hex Plug
ASTM B564 Hastelloy B3 Socket Weld Bends
Hastelloy B3 Socket Weld Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS |
| Hastelloy B3 | 2.4600 | N10675 |
Hastelloy B3 Socket Weld Chemical Composition
| Grade | C | Mn | Si | P | S | Cu | Mo | Ni | Fe | Cr |
| Hastelloy B3 | 0.01 max | 3.00 max | 0.10 max | 0.04 max | 0.03 max | 0.20 max | 28.5 | 65 min | 15 | 1.50 max |
Hastelloy B3 Socket Weld Mechanical Composition
| Density | Elongation | Yield Strength (0.2%Offset) | Melting Point | Tensile Strength |
| 9.2 g/cm3 | 40% | Psi – 52,000 , MPa – 350 | 1370 °C (2550 °F) | Psi - 1,15,000 , MPa -760 |
Manufacturing Standards of Hastelloy B3 Socket Weld Fittings
| ASTM B564 / B564M | Forged Fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Stainless Steel Forged Fittings |
| BS21 | Threading. |
| BS3799 | Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry |
| ANSI B16.11 | Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings |
| ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
| ISO 4144 | Stainless steel fittings threaded to ISO 7-1. |
| MSS SP-95 | Swage(d) Nipples and Bull Plugs |
ASTM B564 Hastelloy B3 Socket Weld Fittings Size Range & Dimensions
| DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
|---|---|---|---|---|
| 1/16″ | 7.895 | 6.00 | 27 | 0.941 |
| 1/8″ | 10.242 | 8.25 | 27 | 0.941 |
| 1/4″ | 13.616 | 10.70 | 18 | 1.411 |
| 3/8″ | 17.055 | 14.10 | 18 | 1.411 |
| 1/2″ | 21.223 | 17.40 | 14 | 1.814 |
| 3/4″ | 26.568 | 22.60 | 14 | 1.814 |
| 1″ | 33.228 | 28.50 | 11.5 | 2.209 |
| 1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
| 1½” | 48.054 | 43.50 | 11.5 | 2.209 |
| 2″ | 60.092 | 55.00 | 11.5 | 2.209 |
| 2½” | 72.699 | 65.50 | 8 | 3.175 |
| 3″ | 88.608 | 81.50 | 8 | 3.175 |
| 3½” | 101.316 | 94.30 | 8 | 3.175 |
| 4″ | 113.973 | 107.00 | 8 | 3.175 |
| 5″ | 141.300 | 134.384 | 8 | 3.175 |
| 6″ | 168.275 | 161.191 | 8 | 3.175 |
| 8″ | 219.075 | 211.673 | 8 | 3.175 |
| 10″ | 273.050 | 265.311 | 8 | 3.175 |
| 12″ | 323.850 | 315.793 | 8 | 3.175 |
Hastelloy B3 Socket Weld Forged Fittings Standard
| Description | Class Designation | ||
|---|---|---|---|
| 3000 | 6000 | 9000 | |
| Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
Other Types of Hastelloy B3 Socket Weld Forged Fittings
- Hastelloy® Alloy B3 Socket Weld Swage Nipple
- Hastelloy DIN 2.4600 Square Head Plugs
- Alloy B3 Forged Socket Weld Bushing
- Hastelloy NW 6022 Socket Weld Pipe Nipples
- Nickel Alloy B3 Socket Weld Hex Head Bushing
- B3 Hastelloy Forged Socket Weld Hex Nipple
- Hastelloy B3 Socket Weld 45 Deg Elbow
- ASTM B564 Alloy B3 90° NPT Socket Weld Elbow
- Alloy B3 Forged Equal Cross 3000lb
- Nickel Alloy B3 Socket Weld Reducing Cross
- Hastelloy Grade B3 Socket Weld Tee
- Hastelloy UNS N10675 High Pressure Forged Fittings
- Stainless Steel Socket Weld Forged Fittings
- Inconel Socket Weld Forged Fittings
- Hastelloy Socket Weld Forged Fittings
- Monel Socket Weld Forged Fittings
- Nickel Socket Weld Forged Fittings
- Duplex Socket Weld Forged Fittings
- Super Duplex Socket Weld Forged Fittings
- Alloy Steel Socket Weld Forged Fittings
- Cupro Nickel Socket Weld Forged Fittings
- Carbon Steel Socket Weld Forged Fittings
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.