Copper Nickel 90-10 Socket Weld Forged Fittings
Cu-Ni 90/10 Socket Weld Fittings, 90/10 Copper Nickel Socketweld Cap, Copper Nickel 90/10 Socket weld Pipe Elbow, Cu-Ni DIN 2.0872 Socketweld Tee Manufacturer in India.
Copper Nickel 90-10 Socket Weld Forged Fittings
Cu-Ni C70600 Socket Weld Forged Fittings
Victor Steel is anacknowledged manufacturer and stockist of Cu-Ni 90 / 10 Socket Weld Forged Fittings, which has with stood many corrosive environments. Furnace atmospheres and lubricants utilized in forging this product, as these highly-alloyed materials are known, need to be loose from sulphur. However, while sulphur compounds are knack as nicely, or for ammonium hydroxide carrier, this Cupro nickel 90 / 10 Socket Weld Elbow Fittings is recommended. The addition of chromium on this product presents advanced corrosion resistance in acidic environments, in comparison to a natural nickel. This product is used for in chemical and food processing equipment. This product is likewise utilized in Aerospace and Heat remedy industry. Welding of this product may be completed through shielded metallic-arc welding the usage of electrode.
Typical applications of this Copper Nickel WNR. 2.0872 Socket Weld Tee Fittings encompass the chemical, pulp and paper, nuclear engineering, etc. This product isn't always precipitation hard enable, however it's far hardened and strengthened most effective via way of means of cold work. The excessive nickel content material of this product permits it to preserve extensive resistance below decreasing conditions. This steel gives solution annealing at 1900 Degree F to 1800 Degree F and then air cool. This steel has “Better” (that means above average) overall performance for strength and oxidation resistance. Precipitation-hardening remedies on this steel aren't required. This steel is utilized in Chemical Processing and Nuclear Reactors. Some changes had been made to its authentic composition on this steel that has enabled it to be even extra creep-resistant and weldable. Copper Nickel UNS C70600 Socket Weld Cap Fittings resists a huge variety of significantly corrosive environments. Due to its excessive nickel content material, this steel is almost proof against chloride ion SCC and pitting. This steel has immune to seawater, in each flowing and stagnant and conditions, and below fouling. This steel has proper resistance to acids, which includes phosphoric, sulphuric, nitric, and hydrochloric. This steel is advanced to many different excessive temperature alloys below cyclic heating and cooling conditions. This steel is regularly utilized in Valves, Distillation columns, Piping, Bubble caps, and more.
ASTM B467 Copper Nickel 90/10 Socketweld Elbow, Cu-Ni 90/10 Socket weld Tee, Cupro Nickel 90/10 Socketweld Coupling, Cu-Ni UNS C70600 Socket Weld Cross Exporter in Mumbai,India.
Specification
| Cu-Ni 90/10 Forged Socket Weld Fittings Specifications | ASTM B467/ ASME SB467 |
|---|---|
| Cu-Ni 90/10 Socket Weld Fittings size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
| Cu-Ni 90/10 Socket Weld Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Cu-Ni 90/10 Forged Fittings Types | Socketweld Fittings, Screwed-Threaded Fittings |
| Cu-Ni 90/10 Hastelloy Forged Fittings Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
| Cu-Ni 90/10 Forged Fittings Thread | NPT, BSPT, BSPP |
| Cu-Ni 90/10 Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Cu-Ni 90/10 Forged Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM B467 Cu-Ni 90/10 Socket Weld 90 Deg Elbow
ASTM B467 Cu-Ni 90/10 Socket Weld 45 Deg Elbow
ASTM B467 Cu-Ni 90/10 Socket Weld Tee
ASTM B467 Cu-Ni 90/10 Socket Weld Cross
ASTM B467 Cu-Ni 90/10 Socket Weld Half Coupling
ASTM B467 Cu-Ni 90/10 Socket Weld Full Coupling
ASTM B467 Cu-Ni 90/10 Socket Weld Cap
ASTM B467 Cu-Ni 90/10 Socket Weld Union
ASTM B467 Cu-Ni 90/10 Socket Weld Reducers
ASTM B467 Cu-Ni 90/10 Socket Weld Inserts
ASTM B467 Cu-Ni 90/10 Socket Weld Lateral Tee
ASTM B467 Cu-Ni 90/10 Socket Weld Pipe Nipple
ASTM B467 Cu-Ni 90/10 Socket Weld Bushings
ASTM B467 Cu-Ni 90/10 Socket Weld Round Plugs
ASTM B467 Cu-Ni 90/10 Socket Weld Hex Plug
ASTM B467 Cu-Ni 90/10 Socket Weld Bends
Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS |
| Cupro Nickel 90/10 | 2.0872 | C70600 |
Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cupro Nickel 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Manufacturing Standards of Cupro Nickel 90/10 Socket Weld Fittings
| ASTM B467 / SB467 | Forged Fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Stainless Steel Forged Fittings |
| BS21 | Threading. |
| BS3799 | Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry |
| ANSI B16.11 | Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings |
| ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
| ISO 4144 | Stainless steel fittings threaded to ISO 7-1. |
| MSS SP-95 | Swage(d) Nipples and Bull Plugs |
ASTM B467 Cupro Nickel 90/10 Socket Weld Fittings Size Range & Dimensions
| DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
|---|---|---|---|---|
| 1/16″ | 7.895 | 6.00 | 27 | 0.941 |
| 1/8″ | 10.242 | 8.25 | 27 | 0.941 |
| 1/4″ | 13.616 | 10.70 | 18 | 1.411 |
| 3/8″ | 17.055 | 14.10 | 18 | 1.411 |
| 1/2″ | 21.223 | 17.40 | 14 | 1.814 |
| 3/4″ | 26.568 | 22.60 | 14 | 1.814 |
| 1″ | 33.228 | 28.50 | 11.5 | 2.209 |
| 1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
| 1½” | 48.054 | 43.50 | 11.5 | 2.209 |
| 2″ | 60.092 | 55.00 | 11.5 | 2.209 |
| 2½” | 72.699 | 65.50 | 8 | 3.175 |
| 3″ | 88.608 | 81.50 | 8 | 3.175 |
| 3½” | 101.316 | 94.30 | 8 | 3.175 |
| 4″ | 113.973 | 107.00 | 8 | 3.175 |
| 5″ | 141.300 | 134.384 | 8 | 3.175 |
| 6″ | 168.275 | 161.191 | 8 | 3.175 |
| 8″ | 219.075 | 211.673 | 8 | 3.175 |
| 10″ | 273.050 | 265.311 | 8 | 3.175 |
| 12″ | 323.850 | 315.793 | 8 | 3.175 |
Cupro Nickel 90/10 Socket Weld Forged Fittings Standard
| Description | Class Designation | ||
|---|---|---|---|
| 3000 | 6000 | 9000 | |
| Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| 1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
| Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
Other Types of Copper Nickel 90-10 Socket Weld Forged Fittings
- Cupro Nickel 90/10 45 Socket Weld Elbow
- Cu-Ni UNS C71500 Socketweld Tee
- 90/10 Cu-Ni Forged Socketweld Tee
- Copper Nickel 90/10 Socket weld 90 Deg Elbow
- CuNi 90/10 Socket weld 90 Deg Elbow
- ASTM B122 90/10 Copper Nickel Socketweld Cap
- ASME SB122 Cu-Ni 90/10 Socket weld Coupling
- Copper Nickel 90/10 Socket Weld Tee
- Cu-Ni 90/10 Forged Socket Weld Fittings
- Copper Nickel 90/10 Socket weld Cross
- Cu-Ni DIN 2.0882 Socket weld Coupling
- 90/10 Copper Nickel Socket Weld Fitting Plug
- Stainless Steel Socket Weld Forged Fittings
- Inconel Socket Weld Forged Fittings
- Hastelloy Socket Weld Forged Fittings
- Monel Socket Weld Forged Fittings
- Nickel Socket Weld Forged Fittings
- Duplex Socket Weld Forged Fittings
- Super Duplex Socket Weld Forged Fittings
- Alloy Steel Socket Weld Forged Fittings
- Cupro Nickel Socket Weld Forged Fittings
- Carbon Steel Socket Weld Forged Fittings
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.