Copper Nickel 70-30 Socket Weld Forged Fittings
Cupro Nickel 70/30 Socket Weld Fittings, Cu-Ni 70-30 Socket Weld Fitting Plug, Copper Nickel 70/30 Socket Weld Cap, Cu-Ni UNS C71500 Copper Socket Weld Tee Manufacturer in India.
Victor Steel is anacknowledged exporter and manufacturer of Cu-Ni 70 / 30 Socket Weld Forged Fittings, which has oxidation resistant for the duration of its beneficial temperature range. This product have corrosion resistance to many varieties of corrosive media. This steel has excessive creep-rupture strength and oxidation immune to 1800 Degree F. A nickel-copper grade, this Cupronickel 70 / 30 Socket Weld Lateral Tee Fittings gives top notch corrosion resistance and excellent weldability. This steel has outstanding fatigue strength and pressure corrosion cracking to chloride ions. This product gives creep-rupture properties at excessive temperatures and may function at cryogenic temperatures as much as 1200 Degree F (650 Degree C). The age-hardening reaction of this product, it allows annealing and welding without spontaneous hardening at some point of heating and cooling.
Uses for this product have a tendency to be within the subject of gas turbine additives and cryogenic garage tanks. Copper Nickel UNS C71500 Socket Weld Union Fittings possesses incredible tensile strength that lends itself nicely to the huge sort of business applications. This product is designed for generators and superchargers that required excessive overall performance at severe temperatures. This product is hardened via way of means of the precipitation of secondary phases (e.g. gamma top and gamma double-top) into the metallic matrix. These product are oxidation- and corrosion-resistant materials nicely applicable for carrier in severe environments subjected to excessive strain and kinetic energy. Within numerous industries, this product has been used for pump shafts, valves, and wellhead additives. Copper Nickel WNR. 2.0882 Socket Weld Plug Fittings presents excessive strength without a strengthening heat remedy. Hot-operating for this product is accomplished the usage of a 2050 Degree F (1121 Degree C) most furnace temperature. This product can resist intense mechanical stresses and lines in severe environments at the same time as final solid and corrosion.It is used even if uncovered to excessive temperature. This steel has corrosion resistant in lots of aqueous environments. This steel resists oxidizing, decreasing, and nitriding atmospheres, in addition to, atmospheres that change among decreasing and oxidizing.
Cupro Nickel 70/30 Socket Weld Elbow, Cu-Ni DIN 2.0882 Socket Weld Union, Copper Nickel 70/30 Socket Weld 90 Deg Elbow, 70/30 CuNi Socket Weld Lateral Supplier in India.
Specification
Cu-Ni 70/30 Forged Socket Weld Fittings Specifications | ASTM B467/ ASME SB564 |
---|---|
Cu-Ni 70/30 Socket Weld Fittings size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
Cu-Ni 70/30 Socket Weld Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Cu-Ni 70/30 Forged Fittings Types | Socketweld Fittings, Screwed-Threaded Fittings |
Cu-Ni 70/30 Hastelloy Forged Fittings Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
Cu-Ni 70/30 Forged Fittings Thread | NPT, BSPT, BSPP |
Cu-Ni 70/30 Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Cu-Ni 70/30 Forged Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
ASTM B467 Cu-Ni 70/30 Socket Weld 90 Deg Elbow
ASTM B467 Cu-Ni 70/30 Socket Weld 45 Deg Elbow
ASTM B467 Cu-Ni 70/30 Socket Weld Tee
ASTM B467 Cu-Ni 70/30 Socket Weld Cross
ASTM B467 Cu-Ni 70/30 Socket Weld Half Coupling
ASTM B467 Cu-Ni 70/30 Socket Weld Full Coupling
ASTM B467 Cu-Ni 70/30 Socket Weld Cap
ASTM B467 Cu-Ni 70/30 Socket Weld Union
ASTM B467 Cu-Ni 70/30 Socket Weld Reducers
ASTM B467 Cu-Ni 70/30 Socket Weld Inserts
ASTM B467 Cu-Ni 70/30 Socket Weld Lateral Tee
ASTM B467 Cu-Ni 70/30 Socket Weld Pipe Nipple
ASTM B467 Cu-Ni 70/30 Socket Weld Bushings
ASTM B467 Cu-Ni 70/30 Socket Weld Round Plugs
ASTM B467 Cu-Ni 70/30 Socket Weld Hex Plug
ASTM B467 Cu-Ni 70/30 Socket Weld Bends
Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS |
Cupro Nickel 70/30 | 2.0882 | C71500 |
Chemical Composition
Grade | Cu | Mn | Pb | Ni | Fe | Zn |
Cupro Nickel 70/30 | 65 min | 1.0 max | 0.05 max | 29-33 max | 0.4-1.0 max | 1 max |
Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Manufacturing Standards of Cupro Nickel 70/30 Socket Weld Fittings
ASTM B467 / SB467 | Forged Fittings and valves and parts for high temperature service. Standard Specification for Wrought Austenitic Stainless Steel Forged Fittings |
BS21 | Threading. |
BS3799 | Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry |
ANSI B16.11 | Forged steel fittings socket-welding and threaded. Socket Welding and Threaded Forged Fittings |
ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
ISO 4144 | Stainless steel fittings threaded to ISO 7-1. |
MSS SP-95 | Swage(d) Nipples and Bull Plugs |
ASTM B467 Cupro Nickel 70/30 Socket Weld Fittings Size Range & Dimensions
DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
---|---|---|---|---|
1/16″ | 7.895 | 6.00 | 27 | 0.941 |
1/8″ | 10.242 | 8.25 | 27 | 0.941 |
1/4″ | 13.616 | 10.70 | 18 | 1.411 |
3/8″ | 17.055 | 14.10 | 18 | 1.411 |
1/2″ | 21.223 | 17.40 | 14 | 1.814 |
3/4″ | 26.568 | 22.60 | 14 | 1.814 |
1″ | 33.228 | 28.50 | 11.5 | 2.209 |
1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
1½” | 48.054 | 43.50 | 11.5 | 2.209 |
2″ | 60.092 | 55.00 | 11.5 | 2.209 |
2½” | 72.699 | 65.50 | 8 | 3.175 |
3″ | 88.608 | 81.50 | 8 | 3.175 |
3½” | 101.316 | 94.30 | 8 | 3.175 |
4″ | 113.973 | 107.00 | 8 | 3.175 |
5″ | 141.300 | 134.384 | 8 | 3.175 |
6″ | 168.275 | 161.191 | 8 | 3.175 |
8″ | 219.075 | 211.673 | 8 | 3.175 |
10″ | 273.050 | 265.311 | 8 | 3.175 |
12″ | 323.850 | 315.793 | 8 | 3.175 |
Cupro Nickel 70/30 Socket Weld Forged Fittings Standard
Description | Class Designation | ||
---|---|---|---|
3000 | 6000 | 9000 | |
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
Other Types of Copper Nickel 70-30 Socket Weld Forged Fittings
- 70/30 Cupro Nickel Socket Weld Forged Cross
- Copper Nickel 70/30 Socket Weld Fittings
- Cu-Ni UNS C71500 Socket weld Forged Fitting
- 70/30 Cu-Ni Socket Weld Union
- Cupro Nickel 70/30 Socket weld Elbow
- 70/30 Copper Nickel Socket Weld Tee
- Cupro Nickel 70/30 Socket Weld Plug
- Cu-Ni DIN 2.0882 Socket Weld Lateral Tee
- Cupro Nickel 70/30 Socket Weld Coupling
- Cu-Ni 70/30 Socket Weld 90 Deg Elbow
- 70/30 Copper Socket Weld Elbow
- Cupro Nickel 70/30 Socket Weld Forged Tee