Nickel Alloy 201 Pipe Fittings
ASTM B366 Alloy 201 Long Stub, Nickel 201 10d Pipe Bend, Nickel Alloy 201 End Cap, Nickel UNS N02201 Pipe Fittings Dealer Manufacturer in India.
Nickel Alloy 201 Pipe Fittings
Nickel 201 UNS N02201 Pipe Fittings
Victor Steel is anacknowledged stockist and supplier of Nickel 201 Pipe Fittings, which is one of the maximum favoured and broadly used grades of stainless at the market. The molybdenum addition on this Nickel UNS N02201 Elbow Pipe Fittings offers it advanced resistance to localized attack (pitting and crevice corrosion) via way of means of chlorides. This steel is designed for slight to excessive corrosion resistance. It is broadly utilized in applications wherein the corrosion properties of different steels aren't adequate. This steel is a non-stabilized austenitic stainless steel with low carbon content material. It is designed for corrosion and pitting resistance in a huge variety of system environments. It is utilized in chemical plant, petrochemical plants, and oil refinery. This steel gives higher corrosion resistance than chrome nickel steels.
Further, this Nickel WNR 2.4068 Long Radius Elbow Pipe Fittings has particularly alloyed chemistry with certain percentage of nickel and molybdenum. This steel is supposed to be used beneath extreme corrosion situations within the system industry. It is utilized in pharmaceutical and clinical environments. The addition of copper to this steel offers it substantially stepped forward resistance to sturdy decreasing acids, especially sulphuric acid. Relying on our knowledge on this domain, we're into supplying this product, which contributes to non-corrosive for longer. The manganese enables maintain the austenitic section on this product, as does the nickel. It has notable resistance to pitting, corrosion and SCC. Ni-201 Short Radius Elbow Pipe Fittings possesses precise corrosion resistance, excessive harness, sturdiness, and strength. It may be very less expensive so customers can use it in indoor applications like indoor fabrication, vehicle trim and application wherein environment isn't a tremendous thing. This product is non-magnetic excessive manganese steel, and is usually an everyday magnetic steel or low alloy steel. The machinability of this product produces lengthy and gummy chips. Manganese content material on this product has a lesser impact at the corrosion and heat resistance however modifies the mechanical and physical properties like weldability, fabricability, and machinability. It has excessive carbon that can reason pressure corrosion cracking, especially after welding thicker material.
Alloy 201 Pipe Bend, Nickel 201 180° LR Return Bend, Nickel Alloy 201 Seamless Fittings, Nickel DIN 2.4068 Seamless Reducing Tee Suppliers in Mumbai,India.
ASTM B366 Nickel 201 Buttweld Fittings Specification
| 201 Nickel Pipe Fittings Specifications | ASTM B366/ ASME SB366 |
|---|---|
| 201 Nickel Alloy Pipe Fittings size | Nickel 201 Seamless Butt Weld Fittings : 1/2" - 10" Nickel 201 Welded Butt Weld Fittings : 1/2" - 48" |
| Alloy 201 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Nickel 201 Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Alloy 201 Buttweld Pipe FittingsType | DN15-DN1201 |
| ASTM B366 Nickel 201 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM B366 Grade 201 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM B366 201 Buttweld Fitting |
| ASTM B366 Nickel 201 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| 201 Nickel Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 366 Nickel 201 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | Alloy UNS N02201, N02201 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM B366 Nickel Alloy 201 Cross
ASTM B366 Nickel Alloy 201 45 Deg Elbow
ASTM B366 Nickel Alloy 201 Eccentric Reducer
ASTM B366 Nickel Alloy 201 Pipe Cap
ASTM B366 Nickel Alloy 201 Pipe Nipples
ASTM B366 Nickel Alloy 201 Pipe Bends
ASTM B366 Nickel Alloy 201 90 Deg Elbow
ASTM B366 Nickel Alloy 201 Lateral Tee
ASTM B366 Nickel Alloy 201 Unequal Tee
ASTM B366 Nickel Alloy 201 Stub End
ASTM B366 Nickel Alloy 201 Tee
ASTM B366 Nickel Alloy 201 Concentric Reducer
ANSI B16.9 Nickel 201 Buttweld Fittings Equivalent Grade Specification
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
ANSI B16.9 Nickel 201 Buttweld Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Nickel 201 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min | – |
ANSI B16.9 Nickel 201 Buttweld Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
ASTM B366 Nickel 201 Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Pressure Rating Class of Nickel 201 Fittings
| Pressure-Temperature ratings for Nickel 200 Pipe Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature Ratings | Pressure Class | ||||
| 150 | 300 | ||||
| 1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
ASTM B366 Nickel 201 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Nickel butt-welding fittings |
| MSS SP-43 | Wrought Nickel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of ASTM B366 Nickel 201 Pipe Fittings
| ASME B16.9 ASTM B366 201 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Nickel Alloy 201 Pipe Fittings
- Nickel 201 Concentric Reducer
- MSS SP-79 Nickel 201 End Pipe Cap
- Nickel Alloy 201 Eccentric Reducer
- Alloy 201 Buttweld Swage Nipple
- Nickel UNS N02201 Elbow
- Nickel 201 JIS NCF Stub Ends
- ASTM B366 201 Nickel Pipe Elbow
- 201 Nickel 180° LR Return Bend
- Grade 200 Nickel Seamless Reducing Tee
- 201 Nickel Alloy Seamless Fittings
- Nickel DIN 2.4068 Pipe Fittings Dimensions
- ASME SB366 Alloy 201 Stub End Exporter
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.