Alloy Steel WP22 Pipe Fittings
ASTM A234 WP22 Alloy Buttweld Fittings, Alloy Steel WP22 Butt weld Pipe Fittings, ANSI B16.9 Alloy Steel A234 WP22 Reducer, Alloy Steel WP22 Pipe Cap Manufacturer in Mumbai,India.
Victor Steel is a well-known manufacturer and distributor of AS WP22 Pipe Fittings, which offers a tremendous corrosion resistance. However, the hardenability of this Alloy Steel WP22 Stub End Pipe Fittings may be minimized via way of means of using consistent effective feeds and sluggish speeds. This product has a barely advanced corrosion resistance over different alloys. It has accurate oxidation resistance and creep strength to 1500 Degree F (816 Degree C). Alloyed by means of having columbium-tantalum (called niobium), this product lets in accurate mechanical properties at excessive temperatures. It gives better creep and pressure rupture properties. This product gives accurate resistance to polyphonic acid SCC, encountered in oil refineries. It may be utilized in applications requiring repeated heating within the variety of 800 Degree F and 1650 Degree F (427 Degree C - 899 Degree C).
When deciding on the filler metallic like this product, the corrosion pressure must be regarded, as well. Alloy Steel WP22 Short Stub End Pipe Fittings can resist lots greater time and abuse earlier than displaying symptoms and symptoms of wear. This steel has excessive quantities of nickel and chromium in austenitic stainless steels. In company of having its chromium-nickel content material and occasional carbon, it is the maximum flexible and broadly used of the austenitic stainless steels. This steel has appropriate drawability and responds nicely to hardening by cold working. They have handiest thirty percentage of the thermal conductivity of non-alloyed steels. The balanced austenitic shape of this steel permits it to be critically deep drawn devoid of intermediate annealing. Alloy Steel WP22 Long Stub End Pipe Fittings is utilized in heavy gauge additives for stepped forward weldability. This steel is likewise made out of no greater than carbon and as a minimum percentage iron. If the carbon stage is beneath on this alloy, then inter-crystalline corrosion does now no longer take region following publicity to excessive temperatures. This steel may be utilized in greater corrosive environments including salt water and chemical containers. Low carbon content material on this steel approach much less carbide precipitation within the heat-affected area all through welding.
ASME SA234M Alloy Steel WP22 Stub End, A234 Alloy Steel WP22 Butt weld Pipe Fittings, Alloy Steel ASTM A234 WP22 Fittings, A234 WP22 Buttweld Pipe Fittings Suppliers in Mumbai,India.
Alloy Steel WP22 Pipe Fittings Specification
WP22 Pipe Fittings Specifications | ASTM A234/ ASME SA234 |
---|---|
WP22 CrMo Pipe Fittings size | WP22 Seamless Butt Weld Fittings : 1/2" - 10" WP22 Welded Butt Weld Fittings : 1/2" - 48" |
CrMo WP22 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Alloy Steel WP22 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
A234 WP22 Buttweld Pipe FittingsType | DN15-DN1200 |
ASTM A234 WP22 Buttweld Fitting Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A234 Grade WP22 Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A234 WP22 Buttweld Fitting |
ASTM A234 WP22 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
WP22 Chrome Moly Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SA 234 WP22 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | CrMo WP22, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Alloy Steel WP22 Cross
Alloy Steel WP22 45 Deg Elbow
Alloy Steel WP22 Concentric Reducer
Alloy Steel WP22 Eccentric Reducer
Alloy Steel WP22 Pipe Cap
Alloy Steel WP22 90 Deg Elbow
Alloy Steel WP22 Lateral Tee
Alloy Steel WP22 Unequal Tee
Alloy Steel WP22 Stub End
Alloy Steel WP22 Tee
Alloy Steel WP22 Pipe Nipples
Alloy Steel WP22 Pipe Bends
Alloy Steel WP22 Pipe Fttings Chemical Composition
Grade | C | Mn | Si | S | P | Cr | Mo |
A234 WP22 |
0.05-0.15 | 0.3-0.6 | ≤0.5 | ≤0.04 | ≤0.04 | 2-2.5 | 0.87-1.13 |
Alloy Steel WP22 Pipe Fttings Mechanical Properties
Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
A234 WP22 |
415-585 | ≥205 | ≥20 |
ASTM A234 Alloy Steel WP22 Pipe Fittings Dimensions Standard
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
---|---|---|---|---|---|---|---|---|
(inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
(millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Alloy Steel WP22 Buttweld Fittings Standard
Standard Code | Standard Name |
---|---|
American Steel Pipe Fittings Standard | |
ANSI ASME SA-366 | Forged Durimet pipe fittings |
ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
ISO 5251 | Stainless steel butt-welding fittings |
MSS SP-43 | Wrought stainless steel butt-welding fittings |
MSS SP-75 | Forging butt-welding fittings |
German Steel Pipe Fittings Standard | |
DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
DIN 2615 | Steel butt-welding pipe fittings.tees |
DIN 2616 | Steel butt-welding pipe fittings.reducers |
DIN 2617 | Steel butt-welding pipe fittings.caps |
Japanese Steel Pipe Fittings Standard | |
JIS B2311 | Universal steel butt-welding pipe fittings |
JIS B2312 | Steel butt-welding pipe fittings |
JIS B2313 | Steel plate butt-welding pipe fittings |
Other Steel Pipe Fittings Standard | |
EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Alloy Steel WP22 Pipe Fittings
ASME B16.9 ASTM A234 Alloy Steel WP22 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Alloy Steel WP22 Pipe Fittings
- Alloy Steel WP22 Nipple Distributor
- ASTM A234M Alloy Steel WP22 Stub Ends
- Alloy Steel WP22 Pipe Elbow Manufacturer
- A234 WP22 Alloy Steel Concentric Reducers
- Grade WP22 Alloy Steel Equal Tee
- Wrought Alloy Steel WP22 Piping Fittings
- A234 Alloy Steel WP22 Short Radius Elbow
- WP22 Alloy Steel Seamless Pipe Fittings
- ANSI B16.9 AS WP22 Butt weld Fittings
- ASME SA234 Alloy WP22 Buttweld Tee
- Alloy Steel WP22 Welded Pipe Fittings
- A234 Alloy Steel WP22 End Pipe Cap Manufacturer