Stainless Steel 347 Flanges, SS 347H Slip On Flanges, SS 347H Threaded Flanges, SS 347 Lap Joint Flanges Manufacturer, Suppliers

Stainless Steel 347/347H Flanges

SS DIN 1.4550 Flanges, ASTM A182 Stainless Steel 347 Socket weld Flanges, 347H Stainless Steel Forged Flanges, Stainless Steel 347 Loose Flanges Manufacturers in India Manufacturer in Mumbai, India.

ASTM A182 SS 347 Flanges

Stainless Steel 347/347H Flanges

ASME SA182 SS 347H Flanges

Victor Steel is a well-knownseller and exporter of Stainless Steel 347 / 347H Flanges, which supposed for excessive temperature and standard corrosive carrier. Different necessities of this Stainless Steel UNS S34700 Long Weld Neck Flanges offer better creep-rupture strength than generally manageable in comparable grades without these exclusive necessities. We have satisfaction in supplying an entire variety of excessive-class, customizable and innovative products with the aid of using the use of state-of-artwork technology. The maximum constructive properties of this Stainless Steel WNR 1.4550 Nippolet Flanges, which cause them to pretty in a position, is composed functions like toughness, hardness, and enhanced strength. It additionally gives hardenability, corrosion resistance, hot hardness, put on resistance and our product manufactures this to offer them all. On the other hand, proper away after hot forming, the temperature of this Alloy 347 Plate Flanges isn't always beneath the smallest amount solution temperature.They are being synthetic with the aid of using the use of pinnacle pleasant of raw materials in conformity via the international standards and technology. It is an all-cause structural steel within the enterprise of as minimum yield strength.

Our Stainless Steel 347 Flanges are variations of the rudimentary austenitic 18/8 Grade 304 by means of added Columbium content – the outline of Columbium soothes the steel and removes carbide precipitation that successively reasons intergranular corrosion. The offered flanges are manufactured by using high-grade material along with national and international standards. Made-up at par with the set industry guidelines and standards, these 347/47H Stainless Steel Flanges find vast usage in engineering, petrochemical and construction industries. Combined content of niobium and tantalum in 347/347 Stainless Steel Flanges are about ten times bigger to the content of carbon extant in it. Stainless Steel 347 / 347H Flanges can be formed and drawn devoid of any difficulty, but it may require re-annealing after forming and drawing. These 347H Stainless Steel Flanges is in general non-magnetic. We Export to Indonesia, United States, Singapore, Malaysia, Turkey, UAE, Russia, Ukraine, South Africa, Australia, Kuwait, Yemen, Oman, Yemen, UAE, Turkey, Japan, Australia, Azerbaijan, Ghana, Germany, Bahrain, Kazakhstan, Greece, Singapore, Thailand.

ASME A182 F347 Socket weld Flanges, SS 347H Reducing Flanges, Stainless Steel 347H Weld Neck Flanges, SS UNS S34700 Flange Manufacturers in Mumbai, India.

Stainless Steel 347/347H Flanges Specification

A182 Gr F347/347H Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Stainless Steel 347/347H Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
SS Grade F347/347H Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM A182 F347/347H Stainless Steel Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SA 182 F347/347H Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SA182 347/347H Stainless Steel Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
A182 F347/347H Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM A182 F347/347H Stainless Steel Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SA182M SS 347/347H Flange Production technique	Forged, Heat treated and machined
A182 Grade F347/347H Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME A182 SS 347/347H Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM A182 SS 347/347H Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
SS 347/347H Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of Stainless Steel ASTM A182 F347/347H Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM A182 F347/347H Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A182 F316 Stainless Steel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SA182M Stainless Steel 347/347H Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
SS 347/347H EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Stainless Steel 347/347H Long Weld Neck Flanges

Stainless Steel 347/347H Screwed Flanges

Stainless Steel 347/347H Orifice Flanges

Stainless Steel 347/347H Blind Flanges

Stainless Steel 347/347H Slip-on Flanges

Stainless Steel 347/347H Nipolet Flanges

Stainless Steel 347/347H Lap Joint Flanges

Stainless Steel 347/347H Weld Neck Flanges

Stainless Steel 347/347H Socket weld Flanges

Stainless Steel 347/347H RTJ Flanges

Stainless Steel 347/347H Spectacle Blind Flanges

Stainless Steel 347/347H Groove & Tongue Flanges

Stainless Steel 347/347H Equivalent Grade Specification

STANDARD	WERKSTOFF NR.	UNS	JIS	GOST	EN
SS 347	1.4550	S34700	SUS 347	08Ch18N12B	X6CrNiNb18-10
SS 347H	1.4961	S34709	SUS 347H	-	X6CrNiNb18-12

Stainless Steel 347/347H Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Cb	Ni	Fe
SS 347	0.08 max	2.0 max	1.0 max	0.045 max	0.030 max	17.00 - 20.00	10xC – 1.10	9.00 - 13.00	62.74 min
SS 347H	0.04 – 0.10	2.0 max	1.0 max	0.045 max	0.030 max	17.00 - 19.00	8xC – 1.10	9.0 - 13.0	63.72 min

Stainless Steel 347/347H Flanges Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1454 °C (2650 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

Manufacturing Standards/Pressure Rating of Stainless Steel 347/347H Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Stainless Steel 347/347H Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SA-182	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	SS 347 PN10 Flanges, 347H SS DIN PN 10 Flanges, 347 SS PN16 Flange
DIN PN20, PN25	SS 347 PN20 Flanges, 347H SS DIN PN 25 Flanges
DIN PN40, PN50	SS 347 PN40 Flanges, 347H SS DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	SS 347 5K SORF Flanges, 347H SS 10K SOFF Flanges
JIS 16K, 20K	SS 347 16K Blind Flanges, 347H SS 20K BLRF Flanges
JIS 30K, 40K	SS 347 30K Slip on Flanges, 347H SS 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	SS 347 BS 10 Table D Flanges, 347H Table D Pipe Flange
BS 10 Table E	SS 347 BS 10 Table E Flanges, 347H Table E Pipe Flange
BS 10 Table F	SS 347 BS 10 Table E Flanges, 347H Stainless Steel Table E Flanges
BS 10 Table H	SS 347 BS 10 Table E Flanges, Stainless Steel 347H Table E Pipe Flanges

Schedule / Class of Stainless Steel 347/347H Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Stainless Steel 347/347H Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Stainless Steel 347/347H Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	Stainless Steel 347/347H Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	Stainless Steel 347/347H Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	Stainless Steel 347/347H Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Stainless Steel 347/347H Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Stainless Steel 347/347H Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Stainless Steel 347/347H Flanges	720 psi