Stainless Steel 310/310S Threaded Forged Fittings
SS 310 Hex Plug, Stainless Steel 310 Threaded Fitting, SS WERKSTOFF NR. 1.4845 Threaded Cross, ASTM A182 SS 310 Threaded Elbow Suppliers in Mumbai,India.
Victor Steel is a recognisedmanufacturer and trader of Stainless Steel 310 / 310S Threaded Forged Fittings, whichis commonly furnished within the annealed circumstance giving tremendous yield strengths. This Stainless Steel UNS S31000 Threaded Elbow Fittings has tremendous crevice and erosion corrosion and owning very excessive mechanical strength properties. This product has very excessive resistance to pitting and crevice corrosion. The yield strength of this product is ready two times that of traditional austenitic stainless steels. This Stainless Steel WNR. 1.4841 Threaded 45-Degree Elbow Fittings is utilized in Subsea manage traces and Off shore platforms, and additionally may be utilized in dilute hydrochloric acid. Often a mild gauge of this product may be used to attain the equal design strength of a thicker nickel alloy.
This 310 Stainless Steel Threaded 90-Degree Elbow Fittings has better heat conductivity than austenitic steels and is appropriate for working temperatures as much as three hundred Degree C. This product may be each cold and hot formed. Attention must be paid for the strength conduct of this product which suddenly will increase beneath one thousand Degree C no matter the decrease strength at excessive temperatures. This Stainless Steel UNS S31008 Threaded Tee Fittings resists sulphide pressure corrosion and chloride environments. It gives resistance to natural sulphuric acid and some of non-oxidizing acids. This steel gives splendid resistance to hydrochloric acid in any respect concentrations and temperatures. This Stainless Steel WNR 1.4845 Threaded Cross Fittings resists the formation of grain boundary carbide precipitates within the weld heat-affected quarter. Today, this steel with limited chemistry may be used within the welded situation. Likewise, this steel does now no longer resist moist chlorine gas or hypochlorite bleach. The extraordinarily low carbon and silicon content material of this 310S Stainless Steel Threaded Cap Fittings reduces precipitation of carbides and different levels within the heat-affected quarter of welds. This steel must be heated to round 2250 Degree F and held for a soak time. These steel are used for many applications which includes nuclear reactors, strain vessels, chemical reactors, etc.
SS 310 Threaded Fittings, ASTM A182 SS 310S Threaded Elbow, Stainless Steel 310 Forged Fittings, UNS S31000 Threaded Cross Suppliers in India.
SS 310/310S Threaded Forged Fittings Specification
310/310S Threaded Forged Fittings Specifications | ASTM A182/ ASME SA182 |
---|---|
310/310S SS Threaded Forged Fittings size | 1/8” NB to 4” NB (Socketweld & Screwed-Threaded) |
SS 310/310S Threaded Forged Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Stainless Steel 310/310S Threaded Forged Fittings Types | Socketweld Fittings, Screwed-Threaded Fittings |
ASTM A182 F310/310S Stainless Steel Threaded Forged Fittings Pressure Rating | Threaded End-2000lb/ 3000lb/ 6000lbs Socket-weld End-3000/ 6000/ 9000lbs |
Stainless Steel 310/310S Threaded Forged Fittings Thread | NPT, BSPT, BSPP |
310/310S Stainless Steel Threaded Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
SS 310/310S Threaded Forged Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Cross, Couplings, Reducers, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows, Plugs |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
SS 310/310S Threaded 90 Deg Elobow
SS 310/310S Threaded Bushings
SS 310/310S Threaded 45 Deg Elobow
SS 310/310S Threaded Equal Tees
SS 310/310S Threaded Square Head Plug
SS 310/310S Threaded Half Coupling
SS 310/310S Threaded Forged Crosses
SS 310/310S Threaded Forged Reducers
SS 310/310S Threaded Forged Fittings Equivalent Grade Specification
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310s | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Threaded Forged Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 310 | 0.015 max | 2 max | 0.15 max | 0.020 max | 0.015 max | 24 – 26 | 0.10 max | 19 – 21 | 54.7 min |
SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24 – 26 | 0.75 max | 19 – 21 | 53.095 min |
SS 310/310S Threaded Forged Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Stainless Steel 310/310S Threaded Forged Fittings Standard
American Steel Forged Fittings Standard | |
Standard Code | Standard Name |
ANSI ASME SA-182 | Forged fittings |
ANSI ASME B16.11 | Socket-welding and Threaded forged fittings |
MSS SP-79 | Socket-welding reducing Inserts |
MSS SP-83 | Class 3000 steel socket-welding and threaded unions |
MSS SP-95 | Swaged nipples and round plugs |
MSS SP-97 | SW,TH and BW ends for integrally reinforced forged branch outlet |
SS 310/310S Threaded Forged Fittings Size Range & Dimensions
DN-NPT | MAJOR DIAMETER MM | TAPPING /DRILL SIZE MM | TPI | PITCH MM |
---|---|---|---|---|
1/16″ | 7.895 | 6.00 | 27 | 0.941 |
1/8″ | 10.242 | 8.25 | 27 | 0.941 |
1/4″ | 13.616 | 10.70 | 18 | 1.411 |
3/8″ | 17.055 | 14.10 | 18 | 1.411 |
1/2″ | 21.223 | 17.40 | 14 | 1.814 |
3/4″ | 26.568 | 22.60 | 14 | 1.814 |
1″ | 33.228 | 28.50 | 11.5 | 2.209 |
1¼” | 41.985 | 37.00 | 11.5 | 2.209 |
1½” | 48.054 | 43.50 | 11.5 | 2.209 |
2″ | 60.092 | 55.00 | 11.5 | 2.209 |
2½” | 72.699 | 65.50 | 8 | 3.175 |
3″ | 88.608 | 81.50 | 8 | 3.175 |
3½” | 101.316 | 94.30 | 8 | 3.175 |
4″ | 113.973 | 107.00 | 8 | 3.175 |
5″ | 141.300 | 134.384 | 8 | 3.175 |
6″ | 168.275 | 161.191 | 8 | 3.175 |
8″ | 219.075 | 211.673 | 8 | 3.175 |
10″ | 273.050 | 265.311 | 8 | 3.175 |
12″ | 323.850 | 315.793 | 8 | 3.175 |
SS 310/310S Socket Weld Fittings Class, Size & Wall Thickness
Description | Class Designation | ||
---|---|---|---|
3000 | 6000 | 9000 | |
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
1/2 – 4 | 1/2 – 2 | 1/2 – 2 | |
Pipe Size by Wall Thickness |
SCH 80 / XS | SCH 160 | XXS |
Other Types of Stainless Steel 310/310S Threaded Forged Fittings
- ASME A182 SS 310S Socket Weld Union
- 310 Stainless Steel Threaded Bull Plug
- SS UNS S31000 Socket Weld Hex Nipple
- Stainless Steel 310 Threaded Boss Fittings
- ASTM A182 SS 310/310S Threaded Hex Plug
- F310 Stainless Steel Socket Weld Lateral Tee
- ASTM A182 SS 310 Socket Weld Reducer
- Stainless Steel 310S Threaded Reducing Tee
- F310S Stainless Steel Socket Weld Tee
- 310S SS Threaded Bushing
- Stainless Steel 310S Socket Weld 90° Elbow
- SS 310 DIN 1.4841 Threaded End Cap