Carbon Steel A350 LF2 Nippo Flanges, Carbon Steel A350 LF2 Spectacle Blind Flanges, Carbon Steel A350 LF2 Threaded Flanges Manufacturer, Suppliers

Carbon Steel A350 LF2 Flanges

ASTM A350 Carbon Steel SWRF Flanges, A350 Carbon Steel Socket Weld Flanges, Carbon Steel ASTM A350 Spectacle Blind Flanges, Global Exporter of ASTM A350 Carbon Steel Flanges Suppliers Manufacturer in India.

Carbon Steel A350 Flanges

ASTM A350 Carbon Steel Flanges

ANSI B16.5 Carbon Steel A350 Flanges

Victor Steel is a famoussupplier and exporterof CS A350 Flanges, whichis formed via way of rolling plate and welding the seam. Carbon Steel ASTM A350 Slip On Flanges of molten steel is likewise being formed wherein the two surfaces are being associated as sturdy electric powered present day is handed thru the steel. Such made from molten steel additionally forms the weld that binds the allied elements. It is an alloy, that is a tubular phase or hole cylinder, and typically however now no longer basically of round cross-phase. It is typically synthetic to one in every of numerous worldwide and country wide commercial standards. Many commercial and government standards exist for the manufacturing of this alloy that is formed via way of rolling plate and welding the seam.

Meanwhile, its assemblies are extra or much less for all of the time built via the use of fittings. ASTM A350 Carbon Steel Blind Flanges is nicely thought-out to lower strain concentrations and offer critical help without the requirement of fortification the weld. It is typically diagnosed as a department connection, and is derived in lowering or complete length for an instantly piece of pipe.It has the ability to glide the liquid in slender areas without the help of, and in competition to, outside forces like gravity. It takes place for the cause that of intermolecular forces among the liquid and surrounding strong surfaces. If the diameter of this ASME SA 350 Carbon Steel Spectacle Blind Flanges is satisfactorily small, then the aggregate of surface tension (that is due to consistency within the liquid) cement forces among the box and liquid, continue to winch up the liquid. In a nutshell, the capillary act on this alloy is due to the strain of adhesion and brotherly love which purpose the liquid to work now no longer in favour of the gravity. Procedures manage and non-unfavourable trying out allowing rightly detailed product to position returned seamless in loads of applications. The weld flash of this alloy may be disconnected from the interior or outside surfaces the usage of a scarfing blade.

Carbon Steel A350 Slip On Flanges, CS A350 Nippolet Flanges, Carbon Steel ASTM A350 WNRF Flanges Exporter, ASTM A350 Carbon Steel Long Weld Neck Flanges Manufacturer in India.

Carbon Steel A350 LF2 Flanges Specification

A350 Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
CS A350 Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Carbon Steel A350 Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM A350 Carbon Steel Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SA 105 A350 Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SA350 CS Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
A350 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM A350 Carbon Steel Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SA350M Carbon Steel A350 Flange Production technique	Forged, Heat treated and machined
A350 Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME SA350 Carbon Steel A350 Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM A350 Carbon Steel A350 Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Carbon Steel A350 Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of CS ASTM A350 Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM A350 Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A350 Carbon Steel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SA350M Carbon Steel A350 Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Carbon Steel A350 EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Carbon Steel A350 Long Weld Neck Flanges

Carbon Steel A350 Screwed Flanges

Carbon Steel A350 Orifice Flanges

Carbon Steel A350 Blind Flanges

Carbon Steel A350 Slip-on Flanges

Carbon Steel A350 Nipolet Flanges

Carbon Steel A350 Lap Joint Flanges

Carbon Steel A350 Weld Neck Flanges

Carbon Steel A350 Socket weld Flanges

Carbon Steel A350 RTJ Flanges

Carbon Steel A350 Spectacle Blind Flanges

Carbon Steel A350 Groove & Tongue Flanges

Manufacturing Standards/Pressure Rating of Carbon Steel A350 LF2 Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Carbon Steel A350 LF2 Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SA-105	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	Carbon Steel A350 PN10 Flanges, A350 Carbon Steel DIN PN 10 Flanges, A350 Carbon Steel PN16 Flange
DIN PN20, PN25	Carbon Steel A350 PN20 Flanges, A350 Carbon DIN PN 25 Flanges
DIN PN40, PN50	Carbon Steel A350 PN40 Flanges, A350 Carbon Steel DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	Carbon Steel A350 5K SORF Flanges, A350 Carbon Steel 10K SOFF Flanges
JIS 16K, 20K	Carbon Steel A350 16K Blind Flanges, A350 Carbon Steel 20K BLRF Flanges
JIS 30K, 40K	Carbon Steel A350 30K Slip on Flanges, A350 Carbon Steel 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	Carbon Steel A350 BS 10 Table D Flanges, A350 Table D Pipe Flange
BS 10 Table E	Carbon Steel A350 BS 10 Table E Flanges, A350 Table E Pipe Flange
BS 10 Table F	Carbon Steel A350 BS 10 Table E Flanges, A350 CS Table E Flanges
BS 10 Table H	Carbon Steel A350 BS 10 Table E Flanges, CS A350 Table E Pipe Flanges

Schedule / Class of Carbon Steel A350 LF2 Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Carbon Steel A350 Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	CS A350 Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Carbon Steel A350 Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	CS A350 Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Carbon Steel A350 Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	CS A350 Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Carbon Steel A350 Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	CS A350 Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Carbon Steel A350 Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	CS A350 Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Carbon Steel A350 Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	CS A350 Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Carbon Steel A350 Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	CS A350 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Carbon Steel A350 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	CS A350 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Carbon Steel A350 Flanges	720 psi