Alloy Steel F9 Flanges, Alloy Steel F9 Weldo / Nipo Flanges, Alloy Steel F9 Expander Flanges, ASTM A182 F9 Slip on Flanges, Manufacturer, Suppliers

Alloy Steel A182 F9 Flanges

ASTM A182 Alloy Steel F9 SORF Flange, CrMo F9 Pipe Flanges, Alloy Steel UNS K90941 Weld Neck Flanges, Chromium Molybdenum Steel F9 Flanges Manufacturer in Mumbai, India.

Alloy Steel A182 F9 Flanges

Alloy Steel UNS K90941 Flanges

ASTM A182 Alloy Steel F9 Flanges

Victor Steel is a famous supplier and stockistof AS A182 F9 Flanges, whichare being made from in all of the standard measurements. Alloy Steel ASTM A182 F9 Long Weld Neck Flanges is being designed within the conventionality with countrywide and worldwide excessive excellent standards.They also are furnished with standard weld bevel, which might be available in flanged, threaded, squared and Victaulic ends. The fundamental characteristic of this alloy is to allow the go with the drift to the centre direction of go with the drift. We offer this alloy in one of the widest variety of capabilities that makes them appropriate for interconnected plumbing systems confined in an area. The fundamental characteristic of this alloy is comparable with the exclusion of offering shops which are pretty differing to every different.

ASTM A182 Alloy Steel F9 Nippolet Flanges are at duration favoured via way of means of the customers for the cause that in their amazing finish abrasion and corrosion resistant, in conjunction with particular tensile efficiency. In the business enterprise of insignificant necessity, they're appropriate for exceedingly excessive in utilization and similarly to for distinctly low in temperature. The fundamental cause of this product is in reality to dam the give up of a line within the piping machine. And that is being obtained via way of means of simply setting this steel at the open-line collectively with at the welding close to point.They are specifically utilized in turbine engine and airframe components; and additionally for utilization in surgical implants. ASME SA 182 Alloy Steel F9 Plate Flanges have an excessive temperature treatable and feature excessive strength and ductility collectively with unsurpassed weldability and fabricability. This alloy, in its annealed condition, is used wherein corrosion resistance is a good sized criterion, or wherein functioning temperatures save you using aluminium. In addition, in its purest forms, they're trouble-loose and extraordinarily bendy to work. They additionally display a good sized strength development over aluminium. Chemical industry, Skins applications and Air frame applications are pretty some names for this alloy, wherein maximum formability is obligatory thru moderate strength.

Competitive Price of Cr-Mo A182 F9 Slip on Flange, Alloy Steel DIN 1.7386 Weld Neck Flanges, ASME SA182 Alloy Steel F9 RTJ Flanges, Alloy Steel F9 Lap Joint Flanges Manufacturer in India.

Alloy Steel A182 F9 Flanges Specification

A182 F9 Flange Size Chart	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Cr-Mo F9 Flange Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Alloy Steel F9 Flange Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASTM A182 F9 Alloy Steel Flanges Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ASME SA 182 F9 Flange	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ASME SA182 F9 CrMo Flange UNI	6Bar 10Bar 16Bar 25Bar 40Bar
A182 F9 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types of ASTM A182 F9 Alloy Steel Flange	Forged / Threaded / Screwed / Plate
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
ASME SA182M Chromium Molybdenum F9 Flange Production technique	Forged, Heat treated and machined
A182 F9 Flange Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations
ASME SA182 Chromium Molybdenum Steel F9 Flange Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
ASTM A182 Chrome Moly Steel F9 Flange Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Alloy Steel F9 Flange Origin	Indian / West Europe / Japan / USA / Korean
Manufacturer of Cr-Mo ASTM A182 F9 Flange	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. ASTM A182 F9 Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A182 F9 Alloy Steel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
ASME SA182M Alloy Steel F9 Flange Uses & application	Bitumen upgraders. Heavy oil refineries. Nuclear power (mostly seamless). Petrochemicals and acids.
Alloy Steel F9 EN 1092-1 Flange Export to	Ireland, Singapore, Indonesia, Ukraine, Saudi & Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Alloy Steel A182 F9 Long Weld Neck Flanges

Alloy Steel A182 F9 Threaded Flanges

Alloy Steel A182 F9 Orifice Flanges

Alloy Steel A182 F9 Blind Flanges

Alloy Steel A182 F9 Slip-on Flanges

Alloy Steel A182 F9 Weld Neck Flanges

Alloy Steel A182 F9 Lap Joint Flanges

Alloy Steel A182 F9 Ring Type Joint Flanges

Alloy Steel A182 F9 Socket weld Flanges

Alloy Steel A182 F9 Groove & Tongue Flanges

Alloy Steel A182 F9 Spectacle Blind Flanges

Alloy Steel A182 F9 Weldo-Nipo Flanges

Alloy Steel F9 Equivalent Grade Specification

STANDARD	UNS	WERKSTOFF NR.	Trade Name
Alloy Steel F9	K90941	1.7386	9Cr-1Mo

Alloy Steel A182 F9 Chemical Composition

Grade	C	Mn	Si	P	S	Cr	Mo
Alloy Steel F9	0.15 max	0.3-0.6	0.5 - 1	0.03	0.03	8 - 10	0.9 - 1.1

Alloy Steel A182 F9 Flanges Mechanical Properties

Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min
Alloy Steel F9	380	585	20

Manufacturing Standards/Pressure Rating of Alloy Steel A182 F9 Pipe Flanges

ASME/ANSI B 16.5	Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47	Blind Flange [Series A & B],Welding Neck Flange
PRESSURE CLASS	75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36	Slip on Flange, Threaded Flange, Welding Neck Flange,
PRESSURE CLASS	300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange,
PRESSURE CLASS	PN 2.5 TO PN 40
BS 4504[PART 1]	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	PN 2.5 TO PN 400
BS 1560 BOSS	Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded,
PRESSURE CLASS	150, 300, 400, 600, 900, 1500, 2500
BS10	Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE	D, E, F, H
DIN FLANGES	DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS	PN 6 TO PN 100

Alloy Steel A182 F9 Flanges Standard

American Steel Flanges Standard
Standard Code	Standard Name
ANSI ASME SA-182	Forged Flanges
ANSI ASME B16.5	Slip on flange, Welding neck flange, Blind flange, Threaded flange, Lap joint flange, RTJ flange
ASME – B 16.47	Welding neck flange, Blind flange
ASME – B 16.36	Welding neck flange Slip on flange
German Steel Flanges Standard
DIN 2527	Steel Blind Flanges, BLRF
DIN 2573 / 2576	Flat Flange for Welding (Slip On)
DIN 2673	Loose Flanges and Rings for Welding (Slip On Flanges and Plain Collars)
DIN 2641 / 2642	Lapped / Loose (Lap Joint) Flanges Plain Collars
DIN 28115	Long Neck Welding Flanges
DIN PN10, PN16	Alloy Steel F9 PN10 Flanges, F9 Alloy Steel DIN PN 10 Flanges, A182 F9 Alloy Steel PN16 Flange
DIN PN20, PN25	Alloy Steel F9 PN20 Flanges, F9 Chrome Moly DIN PN 25 Flanges
DIN PN40, PN50	Chrome Moly Steel F9 PN40 Flanges, F9 Alloy Steel DIN PN 50 Flanges
Japanese Steel Flanges Standard
JIS B2220	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS B2291	Slipon plate flange (SOP), Slipon Hub (SOH), Socket Welding flange (SW), Welding neck flange (WN), Lapjoint (LJ), Threaded flange (TR)/ Itegral flange (IT) Blank flange (BL)
JIS 5K, 10K	Alloy Steel F9 5K SORF Flanges, F9 Alloy Steel 10K SOFF Flanges
JIS 16K, 20K	Alloy Steel F9 16K Blind Flanges, A182 F9 Chromium Molybdenum Steel 20K BLRF Flanges
JIS 30K, 40K	Alloy Steel F9 30K Slip on Flanges, F9 Alloy Steel 40K Blind Flanges
Italian Flanges Standard
UNI FLANGES	Plan flanges (2276, 2277, 2278, 6083, 6084) Welding neck (2280, 2281, 2282, 2283, 2284, 2285, 2286) Lapped flanges (6088, 6089, 6090, 2999, 2300) Blind flanges (6091, 6092, 6093, 6094, 6095, 6096, 6097) threaded flanges (2253, 2254)
British Standard Pipe Flanges Standard
BS 10 Table D	Alloy Steel F9 BS 10 Table D Flanges, F9 Table D Pipe Flange
BS 10 Table E	Alloy Steel F9 BS 10 Table E Flanges, A182 F9 Table E Pipe Flange
BS 10 Table F	Chromium Molybdenum Steel F9 BS 10 Table E Flanges, F9 Cr-Mo Table E Flanges
BS 10 Table H	Alloy Steel F9 BS 10 Table E Flanges, Cr-Mo F9 Table E Pipe Flanges

Schedule / Class of Alloy Steel A182 F9 Flanges

Flange Schedule/Class	Pipe Size - Pipe Flanges	Flange Connection Type	Flange Material	Max. Pressure
ASME B16.5 Class 150	1/2"	FNPT	Alloy Steel F9 Flanges	150 psi
ASME B16.5 Class 150	1/2"	Socket Weld	Cr-Mo F9 Flanges	275 psi
ASME B16.5 Class 150	1/2"	Welded	Alloy Steel F9 Flanges	150 psi
ASME B16.5 Class 150	3/4"	FNPT	Cr-Mo A182 F9 Flanges	150 psi
ASME B16.5 Class 150	3/4"	Socket Weld	Alloy Steel F9 Flanges	275 psi
ASME B16.5 Class 150	1-1/4"	Socket Weld	CrMo F9 Flanges	275 psi
ASME B16.5 Class 150	1-1/2"	Socket Weld	Alloy Steel F9 Flanges	275 psi
ASME B16.5 Class 150	2"	FNPT	Cr-Mo F9 Flanges	150 psi
ASME B16.5 Class 150	2"	Socket Weld	Alloy Steel A182 F9 Flanges	275 psi
ASME B16.5 Class 150	2-1/2"	Socket Weld	Cr-Mo F9 Flanges	275 psi
ASME B16.5 Class 150	3"	Socket Weld	Alloy Steel F9 Flanges	275 psi
ASME B16.5 Class 150	4"	FNPT	Cr-Mo F9 Flanges	150 psi
ASME B16.5 Class 150	4"	Socket Weld	Alloy Steel F9 Flanges	275 psi
ASME B16.5 Class 300	1/2"	Slip On	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	1/2"	Slip On	Alloy Steel A182 F9 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	CrMo F9 Flanges	720 psi
ASME B16.5 Class 300	1"	Slip On	Alloy Steel F9 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	FNPT	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	1-1/4"	Slip On	Alloy Steel F9 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	1-1/2"	Slip On	Alloy Steel F9 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	2"	Slip On	Alloy Steel F9 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	CrMo F9 Flanges	720 psi
ASME B16.5 Class 300	2-1/2"	Slip On	Alloy Steel F9 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	3"	Slip On	Alloy Steel A182 F9 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Cr-Mo F9 Flanges	720 psi
ASME B16.5 Class 300	4"	Slip On	Alloy Steel F9 Flanges	720 psi