Abrex Plate
Abrex 550 Steel Plates, Abrex 400 Steel Plates, Abrex 500 Steel Plates, Abrex 450 Steel Plates, Abrex 325 L Steel Plates Manufacturer, Suppliers in Mumbai, India, Russia, Poland.
We are Manufacturer, Supplier & Exporter of Abrex 400 & 500 Plate in Mumbai, India. These ABREX 400 & 500 Plates is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties.The utilization of abrasion resistance ABREX 400 &500 steel plate particularly lessens the weight of structural parts presented to serve grating conditions. Contrast and consistent steel, ABREX steel plate decreases structural weight and conveys monetary benefits.
Selection of elite abrasion resistant ABREX 500 will delay the administration life of apparatus and part. Abrex 400 & 500 Plates and Sheets is a through solidified scraped spot safe steel with a regular hardness of 415 BHN. Abrex 400 & 500 Plates and Sheets are the most generally utilized of the wear safe evaluations. Abrex 400 Plates and Sheets show an incredible blend of high imperviousness to effect, workability, weld capacity and imperviousness to scraped area. We Export to Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Japan, Australia, UAE, France, Azerbaijan, Ghana, Germany, Indonesia & Bahrain, Kazakhstan, Greece, Singapore, Thailand, Indonesia.
Abrex Plate Specification
Item | Abrasion Resistant Abrex Plate |
Material | Abrex 400, Abrex 450, Abrex 500, Abrex 600 |
Thickness | 3-200mm |
Width | 500-3000mm |
Length | 1000-12000mm |
Heat Treatment | N, Q+T |
Surface Paint | EP, PE, HDP, SMP, PVDF |
Export to | USA, India, UAE, Saudi Arabia, Singapore, Iraq, Turkey, Indonesia |
Abrex Plate Chemical Composition
Type | Grades Designation | Chemical Composition (%)*1 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Ni | Cr | Mo | B | PCM (t:thickness)*2 | |||
≤t25 | t>25 | |||||||||||
Standard Type | ABREX 400 | ≤0.21 | ≤0.70 | ≤2.00 | ≤0.025 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.30 | ≤0.35 |
ABREX 450 | ≤0.23 | ≤0.70 | ≤2.00 | ≤0.025 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.36 | ≤0.36 | |
ABREX 500 | ≤0.35 | ≤0.70 | ≤2.00 | ≤0.015 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.42 | ≤0.42 | |
ABREX 600 | ≤0.45 | ≤0.70 | ≤2.00 | ≤0.015 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.54 | - | |
Extra Tough Type | ABREX 400LT | ≤0.21 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.30 | ≤0.35 |
ABREX 450LT | ≤0.28 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.36 | - | |
ABREX 500LT | ≤0.35 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.42 | - |
Abrex Plate Mechanical Properties
Type | Grades Designation | Thick-ness (mm) | Brinell Hardness (HBW) | Mechanical Properties | ||||||
---|---|---|---|---|---|---|---|---|---|---|
Yield Strength (N/mm2) | Tensile Strength (N/mm2) | Bend Radius (t:thickn-ess) | Angle | Result | Tempera-ture () | Absored Energy (j) | ||||
Standard Type | ABREX 400 | 25 | 414, 417, 416 | 1075 | 1322 | 3t | No Cracking | 0 | 73 | |
ABREX 450 | 25 | 458, 453, 459 | 1192 | 1469 | 3t | No Cracking | 0 | 57 | ||
ABREX 500 | 25 | 513, 509, 520 | 1373 | 1552 | 3t | No Cracking | 0 | 43 | ||
ABREX 600 | 25 | 611, 606, 601 | 1568 | 2058 | - | - | - | 0 | 13 | |
Extra Tough Type | ABREX 400LT | 60 | 390, 393, 393 | 1162 | 1207 | 3t | 180 | No Cracking | -40 | 63 |
ABREX 450LT | 25 | 464, 464, 467 | 1237 | 1560 | 3t | 180 | No Cracking | -40 | 38 | |
ABREX 500LT | 25 | 495, 492, 495 | 1198 | 1680 | 3t | 180 | No Cracking | -40 | 38 | |
Test Conditions | JIS Z2243 Surface | JIS Np. 5 T Direction | JIS No. 1T Direction | 2mmV Notch L Direction |
Other Types of Abrex Plate
- Abrex 550 Steel Plates
- Abrex 400 Steel Plates
- Abrex 450 Wear Resistant Steel Plates
- 4 mm Abrex 500 Plate
- 22 mm Abrex 600 Plate
- Abrex 400 Steel Plates
- Sumihard 450 Abrasion Resistant Sheet
- Abrex 450L Steel Plates
- 4 mm Abrex 600 Plate
- 16 mm Abrex 400 Plate