Alloy Steel WP9 Pipe Fittings
Alloy Steel WP9 Short Radius Elbow, Alloy Steel WP9 Pipe bend, WP9 Alloy Steel Seamless Pipe Fittings, ASTM A234 Chrome Moly Alloy Steel Gr. WP9 Cross Manufacturer in Mumbai,India.
Alloy Steel WP9 Pipe Fittings
ASTM A234 Alloy Steel WP9 Pipe Fittings
Victor Steel is a well-known manufacturer and supplier of AS WP9 Pipe Fittings, which are basically nonmagnetic as annealed and so have an incredible mechanical properties. Alloy Steel WP9 Equal Tee Pipe Fittings can get marked up via way of means of fingerprints and grease, increase discoloration, and in the end rust. We can guarantee our clients that the enclosure and its elements are built of the precise this product, as special and ordered. Itin addition has incredible low temperature properties. This product has incredible forming and welding. This property has resulted on this product being the dominant grade utilized in applications like sinks and saucepans. This product refers to the quantity of chromium and nickel (respectively) within the product. It is right for an extensive sort of domestic and commercial applications.
Alloy Steel WP9 Unequal Tee Pipe Fittings is broadly utilized in environments wherein sulphur dioxide gas is gift at excessive temperatures. This steel has accurate resistance to oxidation at temperatures of as much as 1040 Degree C (1904 Degree F). Inter-connected temperature for this steel have to now no longer exceed one hundred fifty Degree C. It is proof against spalling and plays higher in thermal cycling applications. A not unusual function of excessive temperature this steel is that they're designed generally to be used at temperatures exceeding ~550 Degree C. This steel is broadly utilized in fairly carburizing atmospheres which includes the ones encountered in petrochemical environments. Alloy Steel WP9 Lateral Tee Pipe Fittings has the retention of a bigger fraction of room temperature strength than the not unusual austenitic alloys. This steel has extra extreme carburizing atmospheres of thermal method system. It is utilized in tube hangers for petroleum refining and steam boilers. Due to its excessive chromium and nickel content material, this steel is advanced in maximum environments. This product has incredible formability and presents top notch corrosion resistance. It is conveniently brake or roll formed into a whole lot of elements for applications. This product includes a great deal better chromium degrees, and further alloying ingredients.
ASME SA234 Alloy Steel 3d Pipe Bend, Alloy Steel WP9 180 Deg Bend, WP9 Alloy Steel Pipe Reducer, Chrome Moly WP9 Pipe Elbow Suppliers in Mumbai,India.
Alloy Steel WP9 Pipe Fittings Specification
| WP9 Pipe Fittings Specifications | ASTM A234/ ASME SA234 |
|---|---|
| WP9 CrMo Pipe Fittings size | WP9 Seamless Butt Weld Fittings : 1/2" - 10" WP9 Welded Butt Weld Fittings : 1/2" - 48" |
| CrMo WP9 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Alloy Steel WP9 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| A234 WP9 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM A234 WP9 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A234 Grade WP9 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A234 WP9 Buttweld Fitting |
| ASTM A234 WP9 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| WP9 Chrome Moly Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 234 WP9 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | CrMo WP9, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Alloy Steel WP9 Cross
Alloy Steel WP9 45 Deg Elbow
Alloy Steel WP9 Concentric Reducer
Alloy Steel WP9 Eccentric Reducer
Alloy Steel WP9 Pipe Cap
Alloy Steel WP9 90 Deg Elbow
Alloy Steel WP9 Lateral Tee
Alloy Steel WP9 Unequal Tee
Alloy Steel WP9 Stub End
Alloy Steel WP9 Tee
Alloy Steel WP9 Pipe Nipples
Alloy Steel WP9 Pipe Bends
Chemical Composition
| Grade | C | Mn | Si | S | P | Cr | Mo |
| A234 WP9 |
≤0.15 | ≤0.6 | 1.00 | ≤0.03 | ≤0.03 | 8-10 | 0.99-1.10 |
Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 WP9 |
380 min | 585 min | ≥30 |
ASTM A234 Alloy Steel WP9 Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Alloy Steel WP9 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Alloy Steel WP9 Pipe Fittings
| ASME B16.9 ASTM A234 Alloy Steel WP9 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Alloy Steel WP9 Pipe Fittings
- Alloy Steel WP9 Butt weld Pipe Fitting
- ASTM A234 Alloy WP 9 Seamless Fitting
- Alloy WP9 Pipe Bend
- ANSI B16.9 WP9 Welded Fitting
- Alloy WP9 Fitting Elbow
- ASME B16.9 AS Alloy Steel WP9 Reducer
- ASTM A234 Alloy Steel WP9 Pipe Tee
- Alloy WP9 Fitting Cross
- ANSI B16.9 Alloy Steel WP 9 Stub End
- WP9 Alloy Steel Pipe Cap
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.