Alloy Steel WP11 Pipe Fittings
A234 Alloy Steel WP11 Butt weld Pipe Fittings, Alloy Steel WP11 Elbow, Alloy Steel WP11 Buttweld Fittings, ASTM A234 WP11 Pipe Fittings Manufacturer in Mumbai, India.
Alloy Steel WP11 Pipe Fittings
ASTM A234 Alloy Steel WP11 Pipe Fittings
Victor Steel is a well-known manufacturer and trader of AS WP11 Pipe Fittings, whichhas accurate resistance to inter-granular attack. Alloy Steel WP11 Tee Pipe Fittings has chromium and molybdenum contents to fit the surroundings the alloy ought to endure. This product is utilized in extreme settings, from polluted marine environments to regions with sub-zero temperatures. The molybdenum makes this product m proof against pitting and crevice corrosion in chloride-infected media. The better nickel and molybdenum content material on this product lets in it to illustrate higher standard corrosion resistant properties. This product additionally provide better creep, tensile strength and pressure-to-rupture at accelerated temperatures. It is regularly utilized in food processing and pharmaceutical system, specifically in potable water.
Alloy Steel WP11 Cross Pipe Fittings is significantly utilized in heavy gauge welded components. This product is likewise significantly used within the oil and gas and chemical industries. It is normally used within the food industry. It is usually recommended to apply chip breakers. This steel has as its foremost function the exquisite addition of molybdenum to its chemical composition. It has improved resistance to chemical assault from acids. This steel is utilized in pulp and paper production and condensers in fossil. They are regularly used for flue gas desulfurization service. It is a corrosion resistant austenitic chromium-nickel-molybdenum alloy, where welding on this steel may be completed the usage of maximum of the traditional fusion and resistance methods. However, a few methods on this steel contain severe working situations that call for even better overall performance characteristics. In addition, this steel has incredible corrosion resistance and strength properties. Alloy Steel WP11Bend Pipe Fittings has better creep, pressure to rupture, and tensile strength at accelerated temperatures. This steel has advanced corrosion resistance. It might also additionally turn out to be barely magnetic due to welding. The excessive molybdenum content material offers this steel with advanced pitting resistance. This product can resist extra seriously accelerated temperatures. It has an incredible resistance and corrosion protection, and so is used for excessive strain steam pipe, and preferred refinery piping.
A234 WP11 Buttweld Pipe Fittings, Alloy Steel WP11 Butt weld Pipe Fittings, ASME A234 Alloy Steel WP11 Reducer, Alloy Steel Gr. WP11 Buttweld Pipe Fittings Suppliers in Mumbai,India.
Alloy Steel WP11 Pipe Fittings Specification
| WP11 Pipe Fittings Specifications | ASTM A234/ ASME SA234 |
|---|---|
| WP11 CrMo Pipe Fittings size | WP11 Seamless Butt Weld Fittings : 1/2" - 10" WP11 Welded Butt Weld Fittings : 1/2" - 48" |
| CrMo WP11 Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
| Alloy Steel WP11 Buttweld Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| A234 WP11 Buttweld Pipe FittingsType | DN15-DN1200 |
| ASTM A234 WP11 Buttweld Fitting Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A234 Grade WP11 Pipe Fitting |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) ASTM A234 WP11 Buttweld Fitting |
| ASTM A234 WP11 Buttweld Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
| WP11 Chrome Moly Buttweld Pipe Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| SA 234 WP11 Pipe Fittings Origin & Mills | Japanese, Indian, USA, Korean, European, Ukraine, Russian |
| Specialized manufacturer of | CrMo WP11, 90º Elbows, 45º Elbows, Tees, Cross, Reducer, Pipe Cap, Stub End, Pipe Bend |
| We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Alloy Steel WP11 Cross
Alloy Steel WP11 45 Deg Elbow
Alloy Steel WP11 Concentric Reducer
Alloy Steel WP11 Eccentric Reducer
Alloy Steel WP11 Pipe Cap
Alloy Steel WP11 90 Deg Elbow
Alloy Steel WP11 Lateral Tee
Alloy Steel WP11 Unequal Tee
Alloy Steel WP11 Stub End
Alloy Steel WP11 Tee
Alloy Steel WP11 Pipe Nipples
Alloy Steel WP11 Pipe Bends
Alloy Steel WP11 Pipe Fttings Chemical Composition
| Grade | C | Mn | Si | S | P | Cr | Mo |
| A234 WP11 |
0.05-0.2 | 0.3-0.8 | 0.5-1 | ≤0.030 | ≤0.030 | 1-1.5 | 0.44-0.65 |
Alloy Steel WP11 Pipe Fttings Mechanical Properties
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 WP11 |
415-585 | ≥205 | ≥20 |
ASTM A234 Alloy Steel WP11 Pipe Fittings Dimensions Standard
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | Elbow 90 Deg | Elbow 45 Deg | Return Elbow 180 Deg | ||||
|---|---|---|---|---|---|---|---|---|
| (inch) | Long Radius Elbow | Short Radius | Long Radius Elbow | Long Radius Elbow | ||||
| (millimeter/ MM) | (inch./ Inches) | Center to Face (Inches) |
Center to Face (Inches) |
Center to Face (Inches) |
Radius (Inches) |
Center to Center (Inches) |
Back to face (Inches) |
|
| 1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
| 3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
| 1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
| 1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
| 2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
| 2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
| 3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
| 3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
| 4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
| 5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
| 6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
| 8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
| 10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
| 12 | 323.9 | 12.750 | 18 | 12 | 7 1/2 | 18 | 36 | 24 3/8 |
| NPS (Normal Pipe Size) | O.D. (Outside Daimeter) | ASME B16.9 Pipe End Cap | ASME B16.9 Straight Tee | ASME B16.9 Straight Cross | ASME B16.9 Long And Short Stub Ends | |||
|---|---|---|---|---|---|---|---|---|
| (inch./ Inches) | (millimeter/ MM) | (Inches) | Length (Inches) |
Center to End (Inches) |
Center to End (Inches) |
Lap Diameter (Inches) |
Long Length (Inches) |
Short Length (Inches) |
| 1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
| 3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
| 1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
| 1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
| 1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
| 2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
| 2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
| 3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
| 3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
| 4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
| 5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
| 6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
| 8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
| 10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
| 12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Alloy Steel WP11 Buttweld Fittings Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-366 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Manufacturing Standards of Alloy Steel WP11 Pipe Fittings
| ASME B16.9 ASTM A234 Alloy Steel WP11 Pipe Fittings | Factory-Made Wrought Buttwelding Fittings | Long Radius Elbows, Long Radius Reducing Elbows, Long Radius Returns, Short Radius Elbows, Short Radius 180-deg Rerurns, 3D elbows, Straight Tees, Straight Crosses, Reducing Outlet Tees, Reducing Outlet Crosses, Lap Joint Stub Ends, Caps, Reducers |
| ASME B16.28 | Short Radius Elbows, Short Radius 180-deg Returns | |
| MSS SP43 | Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications | Long Radius Elbows, Straight and Reducing-on-the-Outlet Tees, Lap Joint Stub ends, caps, long radius 180 Degree returns, concentric reducers, eccentric reducers |
| Mss SP75 | Long Radius Elbows, 3R elbows, straight tees, reducing outlet tees, caps, reducers |
Other Types of Alloy Steel WP11 Pipe Fittings
- Alloy Steel WP11 Nipple Distributor
- ASTM A234 AS WP11 Buttweld 90° Elbow
- Alloy Steel WP11 Butt weld Elbows
- A234 WP11 Alloy Steel Concentric Reducers
- Grade WP11 Alloy Steel Equal Tee
- Alloy Steel WP11 Short Radius Elbow
- WP11 Alloy Steel Seamless Pipe Fittings
- ASME SA234 Alloy WP11 Buttweld Tee
- WP11 Alloy Steel Welded Pipe Fittings
- Alloy Steel WP11 Long Radius Elbow
- A234 Alloy Steel WP11 End Pipe Cap
- Alloy Steel WP11 A234 Eccentric Reducer
Other Products
Brochures
View our 2020 financial prospectus brochure for an easy to read guide on all of the services offer.